• Korean Journal of Applied Biomechanics
• /
• v.23 no.2
• /
• pp.117-123
• /
• 2013

The purpose of this study was to provide data to increase the success rate of penalty kicks through quantifying the shape of skilled kicks by performing a kinematic analysis on the change of movement during the kicking phase which the goalkeeper uses as a vital clue. Three high definition video cameras(GR-HD1KR, JVC, Japan) were used for the study and 18 reflective markers were attached to the body joints. Corners of the goal, difficult for goalkeepers to block, were set as aims and 1 m by 1.2 m targets were installed. Each subject had five sets of kicks at random, and the analysis was done on the movements that hit the target. Time, speed of the right lower limb's center of mass, joint angle, and angular velocity were chosen as factors and the results of the analysis showed statistical significance. The player taking a penalty kick should train to avoid leaning one's body towards the kicking direction and change the angle of the right foot right before the impact to decide the direction of the ball. The goalkeeper can increase the save success rate by studying the angle of the kicker's body and the right foot as well as the timing of the kick.

• Health Policy and Management
• /
• v.20 no.4
• /
• pp.19-44
• /
• 2010

This study was conducted to investigate the changes in patterns of Daegu- and Gyeongbuk-based patients' use of medical care facilities located in Seoul. The 'Patient Survey' data issued by the Ministry of Health and Welfare for 2002, 2005, and 2008 were used. Among all discharged patients residing in Daegu and Gyeongbuk, 133,456 who used medical facilities in Daegu, Gyeongbuk, and Seoul were selected. Among patients residing in Daegu, 2.2% used medical facilities in Seoul in 2002, 3.7% in 2005, and 3.5% in 2008. The corresponding rates among patients living in Gyeongbuk were 5.6%(2002), 7.1%(2005), and 7.3%(2008). Regarding the ICD-10 disease groups, the use of medical facilities in Seoul by patients residing in either Daegu or Gyeongbuk increased in 2005 right after the introduction of the KTX high-speed train service, covering various disease groups, but decreased again in 2008. 'Neoplasm' cases, however, showed a progressive rising trend during the years studied. Multivariate data analysis for the three years showed that sex, age, payment type, hospital type, residence, year, and disease groups were all significantly associated with the utilization of medical facilities in Seoul. The major results are : First, use of medical facilities in Seoul by Gyeongbuk patients was 2.4-fold higher than that by Daegu patients, but with respect to 2005 and 2008 vs. 2002, use of medical facilities in Seoul by Daegu resident patients' showed a larger increase than that by Gyeongbuk's patients. Second, for patients residing in the two regions, use of medical facilities in Seoul was highest for 'congenital malformations, deformations and chromosomal abnormalities', followed by 'neoplasms'. Third, for patients residing in the two regions, general hospitals comprise the primary factor in the use of medical facilities in Seoul. The study shows that local medical facilities should individually exert more efforts to improve the quality of their medical services. Relevant authorities should likewise help these facilities develop their own unique services and respective specialization.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.922-932
• /
• 2018

Radial distance sensors are widely used for surveying and autonomous navigation. It is necessary to train the operation principle of these sensors and how to apply them. Although commercialization of radial distance sensor continues to be cost-effective through lower performance, but it is still expensive for educational purposes. In this paper, we propose a distance sensor module with object tracking using radial array of low cost phototransistor which can be used for educational robot. The proposed method is able to detect the position of a fast moving object immediately by arranging the phototransistor in the range of 180 degrees and improve the sensing angle range and track the object by the sensor rotation using the servo motor. The scan speed of the proposed sensor is 50~200 times faster than the commercial distance sensor, thus it can be applied to a high performance educational mobile robot with 1ms control loop.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.362-368
• /
• 2024

In this paper, we investigated the performance of directional and omnidirectional precoding schemes when transmitting to improve downlink performance in massive MIMO. Omnidirectional precoding was used to broadcast a common signal, such as a synchronization or control signal, to all users. The main purpose of omnidirectional precoding is to design the precoding matrix so that the signal transmitted in the downlink is the same in all directions and emitted with maximum energy. We propose a flexible omnidirectional precoding method for full-dimensional massive MIMO that can set the spatial coverage range to less than 120 degrees. The constraints of omnidirectionality of all antennas, equal transmit power, and maximum transmit rate are used to design the encoding matrix of the proposed method. The performance was evaluated in terms of spatial coverage by considering changing the spatial coverage of the antenna array by changing the distance between neighboring antennas in the antenna array.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.565-571
• /
• 2006

This study aimed to analyze access mode choice behavior for KTX Passengers. To fulfill the aims of this study, Dong-Daegu Station was selected as a station for a case study. This study takes place in two stages. These are (i) descriptive statistical analysis of transportation status before and after introduction of the KTX, (ii) empirical model estimation for analyzing access mode choice behavior. This study makes use of the data from travel survey from Daegu metropolitan area. The main part of the survey was carried out in the KTX Dong-Daegu station. The data was collected from a sample of 1,800 individuals. The survey data includes the information on travel from Dong-Daegu station to Seoul. From descriptive statistical analysis of transportation status before and after introduction of the KTX, it is found that revealed demand of the KTX is lower than that expected. Moreover, it is found that the low demand of the KTX stems from high cost for the KTX itself and inconvenience( including travel time and cost) of access mode. In order to analyze mode choice behavior for accessing Dong-Daegu station, multinomial logit model structure is used. For the model specification, a variety of behavioral assumptions about the factors which affect the access mode choice, were considered. From the empirical model estimation, it si found that access travel time and access travel cost are significant in choosing access mode. Given the empirical evidence, we see that improvement of access transportation system for Dong-Daegu station is very important for enhancing the use of KTX.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.650-655
• /
• 2016

Gears are components of transmission which transmit the power of an engine to a machine and offer numerous speed ratios, a compact structure, and high efficiency of power transmission. Gear train design in the automotive industry uses simulation software. However, PTO (Power Take-Off) gear design for agricultural applications uses the empirical method because of the wide range of load fluctuations in agricultural fields. The PTO is an important part of agricultural tractors which transmits the power to various tractor implements. Therefore, a simulation was essential to the optimal design of the PTO. When the PTO gear is optimally designed, there are many advantages such as low cost, reduced size, and light weight. In this study, we conducted the bending and contact safety factor simulation for the PTO gear of an agricultural tractor. The bending and contact safety factors were calculated on ISO 6336 : 2006 by decreasing the face widths of the PTO pinion and wheel gear from 18 mm at an interval of 1 mm. The safety factor of the PTO gear decreased as the face width decreased. The contact safety factors of the pinion and wheel gear were 1.45 and 1.53, respectively, when the face width was 18 mm. The simulation results showed that the face width of the PTO gear should be greater than 9 mm to maintain the bending and contact safety factors higher than 1. It would be possible to reduce the weight of the PTO gear for different uses and working conditions. This study suggests that the possibility of designing an optimal PTO gear decreases as its face width decreases.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.139-144
• /
• 2015

Recently, to realize sound-absorbing structures, we have to insert sound-absorbing materials into wall. These shapes are taken limitations because sound-absorbing materials should be fixed. Therefore, the sound absorption is changed by environment that used the sound-absorbing materials. On the other hand, we will take same effect without sound-absorbing material, if we change the shape of wall to sound absorbing structure. If we use this sound absorbing structure, we can get benefits by removing limitation of materials. Therefore we suggest perforated plate for effective sound-absorbing structure. We confirmed the function of sound-absorption of this structure using equivalent property. Then, we found the similarity between perforated plate and resonator. Also, we verify these theories through computer simulation by FEM(Finite Element Method). Finally, we validated that perforated plate has function of sound absorption without sound-absorbing material. This perforated plate is used for sound-absorbing material of buildings and transportations such as vehicle, train etc. Also, these results could be further used basic tool for design of sound-absorption structure.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.11
• /
• pp.25-31
• /
• 2015

Elastic behavior of the railway roadbed which supports the repeating dynamic loads of the train is mainly affected by the shear modulus of the upper roadbed. Therefore, shear wave velocity estimation of the uniformly compacted roadbed can be used to estimate the elastic behavior of the railway roadbed. The objective of this study is to suggest the relationship between the dynamic cone penetration index (DCPI) and the shear wave velocity ($V_s$) of the upper roadbed in order to estimate the shear wave velocity by using the dynamic cone penetration test (DCPT). To ensure the reliability of the relationship, the dynamic cone penetration test and the measurement of the shear wave velocity are conducted on the constructed upper roadbed. As a method for measurement of the shear wave velocity, cross hole is used and then the dynamic cone penetration test is performed at a center point between the source and the receiver of the cross hole. As a result of the correlation of the dynamic cone penetration index and the shear wave velocity at the same depths, the shear wave velocity is estimated as a form of involution of the dynamic cone penetration index with a determinant coefficient above 0.8. The result of this study can be used to estimate both the shear wave velocity and the strength of the railway roadbed using the dynamic cone penetrometer.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.236-243
• /
• 2010

We examine the change in healthcare utilization pattern of cancer patients since the launch of KTX in 2004. It is found that during the year of 2004 and 2005 the rapid increase in the ratio of cancer patients' healthcare utilizations for the tertiary hospitals in Seoul to the total healthcare utilizations has accompanied the rapid decrease in the corresponding ratio for the tertiary hospitals in the local metropolitan areas under the influence of KTX while the corresponding ratio for the tertiary hospitals in the local cities with little influence of KTX on them has exhibited mild change. Since healthcare consumers' choice of hospitals can be characterized by "foot voting" action in the healthcare service market in Korea, such a phenomenon may have strong implication that the introduction of KTX may have affected substantially the inter-area healthcare utilization pattern by cancer patients by reducing various sorts of long-distance travel costs. Therefore, considering the potential contribution of KTX to the increase of cancer patients' accessibility to hospitals with higher qualities, support policies such as fare discount for low-income cancer patients in local areas may need to be taken into consideration where the well-designed fare discount program for low-income cancer patients may increase utilizations of KTX by lowincome cancer patients without incurring additional costs to running of KTX.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.3
• /
• pp.295-300
• /
• 2010

The international convention on standards of training, certification and watch-keeping for seafarers, 1978(1978 STCW convention) has been established as a minimum standard and competence of seafarers, and contributed to reduce marine accidents caused by human errors. The convention has been partly amended several times according to environmental change of ship's operation and there were comprehensive revisions in so called 1995 amended STCW convention. In these years, ships are in tendency of increasing size and speed, and also adopted high technologies. These kinds of changes brought STW sub-committee up for discussions to modify the convention to cope with new environments from the year of 2006. As the result, major amendaments to STCW convention have been adopted at a diplomatic conference in Manila, Philippine in June 2010, thereby new global standards will be in force to train and certify seafarers to operate technologically advanced ships before long. This paper is to introduce major amendaments such as ship's security, ECDIS and leadership etc. in this Manila amendments and to clarify some articles to be adopted in programs for education and training of seafarers in Korea.