• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.131-132
• /
• 2008

It is necessary to develop a high-speed wireless transmission system, which is able to send medical informations to the emergency medical center during emergency patient transportation. In this research, a system which transmits patient’s vital signs and a real-time audio/video contents of the event has been designed, developed, and the suitability of the system has been verified. Test results indicate that the system is capable of transmitting vital signal data, including 17 numeric data, 12 waveforms and 113 events, reading the affected part by forwarding a $320{\times}240$ pixel image at 2fps. Also, the full-duplex voice transmission of the system at 8bit/64kbps is enough to make stable communication between emergency medical technicians and hospital professionals possible. After numerous hours of driving, the packet loss of patient vital signs is 0.013%.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.2
• /
• pp.27-34
• /
• 2013

NAND Flash Memory has been used in several devices by low cost and high capacity, and the demand for mass NAND Flash Memory has increased due to the multimedia extension of mobile devices. The JFFS2, NILFS2, and YAFFS2 file systems are used mainly in NAND Flash Memory. In this paper, the performance of Sequential read/write of the 3 file systems are analyzed for the 4 I/O schedulers : CFQ(Complete Fair Queuing) I/O scheduler, NOOP(No Operation) I/O scheduler, Anticipatory I/O scheduler, and Deadline I/O scheduler. In JFFS2 file system, Anticipatory I/O scheduler has the best performance by 8% decreasing speed in writing time and 1.5% decreasing speed in reading time compared to the other I/O scheduler. In YAFFS2 file system, it results are similar to performance in reading and writing for the 4 I/O schedulers. In NILFS2 file system, NOOP I/O scheduler has 2% faster in writing and Deadline I/O scheduler has 6% faster in reading than other I/O schedulers.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2149-2160
• /
• 2000

Recently many efforts on the development of automatic processing system for delivery sequence sorting have been performed in ETRI, which requires the use of postal4-state bar code system to encode delivery points. The 4-state bar code called postal 4-state barcode for high speed processing that has been specifically designed for information processing of logistics and automatic processing of he mail items. The Information of 4-state bar code indicates mail data such as post code, delivery sequence number, error correction code worked, customer information, and a unique ID. This appear addresses the issue on he reduction of reading error in postal 4-state raster beam based bar code reader. The raster beam scanning features are the unequally distributed number of spots per each unit, which cause reading errors. We propose a method for reducing the bar code reading error by adjusting measured values of bar code width to its average value over each interval. The test results show that the above method reduces the average reading error rate approximately by 99.88%.

• ETRI Journal
• /
• v.24 no.3
• /
• pp.205-210
• /
• 2002

This paper describes our high-density near-field optical recording using bent cantilever fiber probes installed in an atomic force microscope. We conducted a near-field reading of nano-scale hole patterns with a 100 nm spatial resolution and a 25 ${\mu}m$/s scan speed; this implies a capability of a data reading density of 60 Gb/$in^2$ with a 0.25 kbps data transfer rate. In addition, we investigated re-writable near-field recording on photochromic diarylethene films. We successfully recorded erasable memory bits having a minimum width of 600 nm in a writing time as short as 30ms. We found that using a cantilever probe simplifies the setup and operation of the near-field optical recording system and may offer multifunctional recording capabilities.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.443-446
• /
• 2003

This paper implement Remote Meter Reading System which is used Bluetooth and SMS in CDMA. This System propose system which tan detect a total amount of gas, electricity or water without a meterman, at home BlueTooth is a close range wireless communication technology which uses a wireless frequency 2.4GHz and has a high trust and self error correction technology according to a low power consumption quality and a high-speed frequency hopping. This makes get a high trust concerning a data transmission than an existing modem. In addition, though wireless modem is restricted by a minimal of a wireless terminal, it will be possible to coincide with the function of the portable with the low power consumption quality by using Bluetooth. And as the system on a chip of module progresses, the possibility of the small size is present. Nowadays, SMS Protocol in CDMA for have a network function based on PPP in CDMA Phone. The proposed Remote Meter Reading System to get more nobility, efficiency, and have good function. SMS Protocol in CDMA have profits which is low power, low cost, and low microwave output.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.4
• /
• pp.240-244
• /
• 2006

As high-definition television(HDTV) broadcasting becoming more generalized, there have been many researches and developments about a large storage capacity and a fast data transfer rate in optical disk drives (ODD). Pickup actuators must have high flexible mode frequencies and large gain margins. Flexible modes are caused by the flexibility of moving parts in the actuator and a servo bandwidth is limited by them. As a result, the system becomes unstable for high-speed operations in high density reading and recording. In this paper, we suggest improved modeling method in considering of the bonding layer. And, the flexible mode frequency of actuator is improved by Design of Experiments of lens holder. The Magnet circuit is designed considering the relation with the moving part. Through improving the yoke design, the magnetic flux is changed and the DC tilt is reduced. Consequently, we designed an actuator which has a high flexible mode frequency and a large gain margins.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.867-870
• /
• 2002

In high-speed optical disk drive, the excitation caused by rotation of a mass-unbalanced disk is a major source of vibration. The vibration can be a disturbance to the servo system, which is sufficient to cause severe failures in the reading and writing process. The vibration also causes users to feel unpleasantness. The vibration reduction is therefore essential for the reliable operation of optical disk drive. One of the approaches to reduce the vibration is a dynamic vibration absorber (DVA). In this paper, we analyze the dynamic behavior of $DVD\pmRW$ combo drive system with DVA through 12_dof rigid multi-body dynamic model. The effective location and the optimal frequency ratio are obtained from the analysis.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.529-536
• /
• 2006

In high-speed optical disk drive, the excitation caused by rotation of a mass-unbalanced disk is a major source of vibration. The vibration can be a disturbance to the servo system, which is sufficient to cause severe failures in the reading and writing process. The vibration also causes users to feel unpleasantness. The vibration reduction is therefore essential for the reliable operation of optical disk drive. One of the approaches to reduce the vibration is a dynamic vibration absorber(DVA). In this paper, we analyze the dynamic behavior of $DVD{\pm}RW$ combo drive system with DVA through 12-dof rigid multi-body dynamic model. The effective location and the optimal frequency ratio for the DVA are obtained from the analysis. The DVA are fabricated based on the analysis and its usefulness is confirmed.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.231-236
• /
• 2003

Video conferencing system it is various at internet and uses the reading is become accomplished. Research of like this portion synchronization of audio, the video compression technique and multimedia data, supports the video conference the research of the Mbone of the If multicast for being active, being become accomplished the multimedia service which is various an video from internet, the line speed of communication becomes high-speed anger and to follow leads is become accomplished. The video conference from opening elder brother dispersion internet network environment the problem against the image which is an image conference data and a voice security is serious and it raises its head. To sleep it presents the security method which from the video conference it follows in quality of multimedia data from the dissertation which it sees and it does.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.143-148
• /
• 2005

Video conference system it is various at internet and uses the reading is become accomplished. Research of like this portion synchronization of audio, the compression technique and multimedia data, supports the video conference the research of the Mbone of the IP multicast for being active. being become accomplished the multimedia service which is various an video from internet, the line speed of communication becomes high-speed anger and to follow leads is become accomplished. The video conference from opening elder brother dispersion internet network environment the problem against the image which is an image conference data and a voice security is serious and it raises its head. To sleep it presents the security method which from the video conference it follows in quality of multimedia data from the dissertation which it sees and it does.