• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.71-81
• /
• 2002

The study was carried out to develop nursery soil for rice seedling of phyllite. First of all, physico-chemical properties of used phyllite in the study through the analysis for agricultural utilization evaluation are as following. Bulk density(BD) of phyllite was $1.31g/cm^3$ each other and porosity had 65% of entire pore size. Also, the water holding capacity(WHC) was 43% at 1/3bar pressure, which phyllite has high WHC. According to, the results the experiments for nursery soil were conducted by mixing the materials such as phyllite, zeolite and hill soil. The mixing ratios were 30, 50, and 70% for zeolite and hill soil into phyllite. These mixed materials were packed in a box by adding 0, 1 and 2g of N-fertilizer. At seedling test, there were increases in the growth of shoot and root of rice for phyllite to zeolite and phyllite to hill soil, respectively. On the other hand, the length of leaf increased with increasing application rate of phyllite, while length and a number of root increased with increasing application rate of hill soil. The growth in the plots of phyllite to zeolite and phyllite to hill soil was better than in control plot. Finally, phyllite plot had efficient results when it compared with others and the study used with phyllite will have to more research and effort for agricultural useful material.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.206-212
• /
• 2018

As many consumers prefer good quality food, farms have used various facilities to cultivate products for satisfying their desires. Among them, the most representative facilities are plastic and glass multi-span greenhouse. The height of both plastic greenhouse and glass greenhouse is around three meters high in Korea. As a result, the crop productivity is limited. The solution is to increase the height of the greenhouses to improve the greenhouses' environment. The device for raising columns consists of a stop device, a pneumatic cylinder, and a vertical member. Pneumatic cylinders were designed with a diameter of 160 mm and a stroke length of 50 mm, taking into consideration the safety factor of 1.5. In addition, the air flow was controlled by nozzle to achieve a time of less than 30 seconds per stroke. It was calculated that $21.5L{\cdot}min^{-1}$ of air was needed to complete in less than 30 seconds. Accordingly, the diameter of the nozzle is designed to be 0.5 mm. When the pressure was 0.9 MPa, the average raising force was 13,805N, which was close to the calculated value of 15,612N. The field test results show that any inconsistency in the row columns was not generated. and that it is considered applicable to the actual glass and plastic greenhouses.

• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.136-140
• /
• 2011

Mechanical properties of degraded materials must be measured for evaluating the integrity of the facilities operating at high temperature. In fact it is complicated to obtain the different degraded specimens from an operating facility. Specimens of 1Cr-0.5Mo steel prepared by the isothermal heat treatment at $700^{\circ}C$ were tested, which has been widely used as tubes for heat exchangers and as plates for pressure vessels. The magnetic properties and Rockwell hardness (HRB) were measured at room temperature. The peak interval of Barkhausen noise envelope (PIBNE), coercivity, and hardness decreased with the increase of degradation. The magnetic and mechanical softening of matrix is likely to govern the properties of the specimen more than the hardening of grain boundary by carbide precipitations. The degradation of test material may be determined by the linear correlation of PIBNE and HRB. Degradation of 1Cr-0.5Mo steel could well be nondestructively evaluated by PIBNE measured with surface type probe.

• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.3
• /
• pp.208-211
• /
• 2006

Microalbuminuria is most frequently caused by kidney damage from diabetes. Moreover, many other conditions can lead to kidney damage, such as high blood pressure, heart failure, cirrhosis, or systemic lupus erythematosus (SLE). The measurement of the microalbumin in urine may be useful for the early diagnosis or as a predictor of nephropathy in diabetes. The most common method for getting a quantitative measurement of urinary protein relies on a 24-hour urine collection. The result of this method is accurate. But 24hr urine collection is difficult to obtain and variations in volume are frequent. Also the patients complain about urine collection. We tried to measure reference values for microalbumin using fasting urine and compare them with the albumin/creatinine ratio using 24hr urine. The concentrations of microalbumin in fasting urine and 24hr urine were $7.1{\pm}3.8mg/L$, $5.7{\pm}2.9mg/L$ (r=0.61, p=0.27), respectively. The albumin/creatinine ratios using fasting urine and 24hr urine were $8.7{\pm}4.2{\mu}g/mg$, $8.7{\pm}4.0{\mu}g/mg$ (r=0.76, p=0.88), respectively. This study indicated that the measurement of microalbumin in fasting urine was an easy and simple method for early diagnosis or to predict nephropathy in diabetes. Thus, setting up the reference value using fasting urine may be useful in the screening test for the diabetic nephropathy patients instead of using the 24hr albumin excretion rate (AER).

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.1
• /
• pp.33-40
• /
• 2007

Engineering behaviour of uplift-resisting ground anchors constructed in weathered rocks has been investigated by carrying out a series of full scale pull-out tests. The anchor was to resist uplift forces (buoyancy) associated with high groundwater table acting on the basement of a rail way station. The study has included the ultimate pull-out capacity of the anchors and shear stress transfer mechanism at the anchor-ground interface. The pull-out tests were conducted by changing bonded lengths of the anchor (2~7 m) and diameter of drilled borehole (108~165 mm) to investigate their effects on the behaviour of the anchor. The measured results showed that the ultimate capacity of the anchors was increased with an increase in the bonded length, diameter of drilled borehole as expected. The ultimate capacity of the anchors deduced from the pull-out tests ranged from 392 to 1,569 kN, depending on the above-mentioned factors. This corresponds to the interface shear strength of about 227~505 kPa. Interface shear stresses deduced from the pull-out test showed that the larger the pull-out force, the larger the mobilisation of the interface shear strength. The failure mode of the anchors heavily depended on the bonded lengths of the anchors. When the bonded length was short (2~3 m), a cone-type failure was observed, whereas when the bonded length increased (5~7 m), failure developed at the grout-ground interface.

• Journal of Bio-Environment Control
• /
• v.6 no.1
• /
• pp.48-54
• /
• 1997

Among the various vegetables eggplant and gourd family can stand against high temperature environmental condition, about 35$^{\circ}C$. However, most of greenhouse farmers are giving up crop cultivation during hot summer season due to extreme temperature, 4$0^{\circ}C$ or above, condition of greenhouse interior. To improve this inferior crop growth condition, for nozzle system was installed in the pet greenhouse and the effect of fog system was investigated in order to determine fog water amount and the required fog nozzle numbers according to house volumes. MEE fog nozzle was selected for this Investigation which can produce water particle size of 27${\mu}{\textrm}{m}$ with water amount of 100$m\ell$ at pumping pressure of 70kg/$\textrm{cm}^2$. House cooling test was conducted in the pet greenhouse with one minute fogging and one minute air ventilation without stopping. It maintained 32$^{\circ}C$ at the house interior when the atmosphere and the house temperature were 35 and 4$0^{\circ}C$, respectively. And, an experimental equation was developed through calculating the changes of relative humidity and temperature with psychrometric equation which revealed the moisture transfer pattern between the house air and fog system. It showed that the required water fogging amounts to reduce 1$0^{\circ}C$, 40 to 3$0^{\circ}C$, needs 80.7$\ell$ for 1-2W(8,350㎥) and 99.9$\ell$ for 3-2G-3S(10,330㎥) type greenhouse with particle size of 27${\mu}{\textrm}{m}$.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.39-44
• /
• 2009

Polymer substrates were fabricated by using poly (phenylene ether) as a base resin, N,N'-m-phenylenedimaleimide (PDMI) as a crosslinking agent and decabromodiphenylethane as a flame retardant. The effects of crosslinking agent and flame retardant on physical properties such as dielectric property of the substrate were investigated. Thermal curing feature of PDMI with or without an initiator was analyzed by DSC, and then, PPE-PDMI test compositions were designed based on this result. Composite sheets were cast by film coater, laminated under vacuum and pressure, and then, the changes of dielectric constant, dielectric loss, peel strength, solder heat resistance and inflammability according to increasing amount of PDMI and flame retardant were evaluated, Dielectric constant and dielectric loss showed increasing trend with increasing amount of PDMI and flame retardant, but solder heat resistance and inflammability were improved. Peel strength was obtained higher than 1 kN/m when PDMI above 10 wt% was added, but slightly decreased as the amount of flame retardant increased. From the measured gel contents, the reaction mechanism of PPE-PDMI system was deduced to the formation of network structure by crosslinking PDMI with PPE rather than the formation of semi-IPN structure. In conclusion, the polymer composite substrate materials with dielectric constant of 2.52$\sim$2.65 and dielectric loss below 0.002 at 1 GHz were obtained and they will be proper for high frequency applications.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.355-367
• /
• 1989

This study examined the physical and mental health factors affecting the industrial accidents of 142 injured and 1,212 uninjured workers in the shipbuilding industry from 1986 to 1988. The results acquired from the Todai Health Index (THI) and from analysis of the health examination were as follows: 1. Among the personal characteristics of the workers, the educational level of injured workers was significantly lower than that of the uninjured workers. 2. Among the physical characteristics, vision and $R\ddot{o}hrer$ Index of the injured workers were lower than those of the uninjured workers, and the difference was statistically significant. On the other hand, the differences in height, weight, hearing function, hematocrit, blood pressure, urine test, and X-ray findings were not statistically significant between the injured and uninjured workers. 3. The score of the THI questionnaire on the physical and mental health of the injured workers was higher than that of the uninjured workers, and the difference was statistically significant. 4. Form the THI score, the industrial workers had complained more about mental health than physical health and there was a statistically singinficant relation with the industrial accidents. 5. The relative risk expressed in terms of the odds ratio was 2.9 for poorer vision, 2.7 for a lower educational level, 2.2 for a higher THI score and 1.6 for overdrinking. 6 Educational level, vision, and the THI score were selected as significant factors influencing industrial accidents based on a log-linear model. According to the results of this model by logistic analysis, the odds ratio of industrial accidents was 1.8 for a lower educational level, 1.7 for poorer vision, and 1.6 for a higher THI score. 7 By event history analysis with the dependent variable as the duration of work at the time of the industrial accident, educational level, age, $R\ddot{o}hrer$ Index and THI score were the statistically significant variables selected, and the hazard rate of industrial accident occurrence was 0.24 for a lower educational level, 0.92 for age, 0.99 for a lower $R\ddot{o}hrer$ Index and 2.72 for a higher THI score. As we have seen, educational level and THI score were the most significant factors affecting the hazard rate of industrial accidents. Vision, $R\ddot{o}hrer$ Index, age, and drinking behavior were also statistically significant variables influencing industrial accidents. Therefore, in order to prevent industrial accidents, it is necessary to establish a health management plan for industry which can objectively evaluate not only the physical but also the mental health of the workers. If we use this type of study as a prospective study design, we can determine the relative risk of physical and mental health factors on industrial accidents. Furthermore, it is expected that this type of study will provide workers at high risk with more precise basic data for a health managment plan for industrial accident prevention.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.8 s.113
• /
• pp.864-871
• /
• 2006

In the development of electricity generating wind turbines for wind farm application, only two types have survived as the methods of power regulation; stall regulation and full span pitch control. The main purpose of this paper is to experimentally identify the characteristics of noise emission of wind turbines according to the power regulation types. The sound measurement procedures of IEC 61400-11 are applied to field test and evaluation of noise emission from each of 1.5 MW and 660 kW wind turbines (WT) utilizing the stall regulation and the pitch control for the power regulation, respectively. Apparent sound power level, wind speed dependence, third-octave band levels and tonality are evaluated for both of WTs. It is observed that equivalent continuous sound pressure levels (ECSPL) of the stall control type of WT continue to increase with increasing wind speed whereas those of the pitch control type of WT show less correlation with wind speed. These observed characteristics are believed to be due to the different airflow patterns around the blade between the stall regulation and the pitch control types of WT; the airflow on the suction side of blade in the stall types of WT are separated at the high wind speed. It is also found that the 1.5 MW WT using the stall control emits lower sound power than 660 kW one using the pitch control at wind speeds below 8m/s, whereas sound power of the former becomes higher than that of the latter in the wind speed over 8m/s. This wind-speed dependence of sound power leads to the very different noise omission characteristics of WTs depending on the seasons because the average wind speed in summer is lower than 8m/s whereas that in summer is higher. Based on these experimental observations, it is proposed that, in view of environmental noise regulation, the developer of wind farm should give enough considerations to the choice of power regulation of their WTG based on the weather conditions of potential wind farm locations.

• Korean Journal of Community Nutrition
• /
• v.3 no.3
• /
• pp.349-357
• /
• 1998

This study was done to investigate the effect of adolescent smoking on dietary intakes and nutritional status of serum lipids and antioxidant vitamins. Subjects were 82 somkers whose average pack-year was 0.73, and 85 nonsmokers of male technical high school students in Seoul. Anthropometric measurement was performed and % body fat was also analyzed by Bioelectrical Impedance Fatness Analyzer(GIF-891). Dietary intakes and habits were examined through questionnaires and nutrient intakes were analyzed by Computer Aided Nutritional (CAN) analysis programs. Serum TG and total cholesterol levels were measured by Spotchem sp-4410 and serum HDL-cholesterol levels were measured by test kit. serum vitamin C level was measured by 2,4-dinitrophenylhydrazine method and serum levels of vitamin A and vitamin E were measured by HPLC. All data were statistically analyzed by SAS PC package program. There was a significant difference in body fat percentage and systolic blood pressure while other anthropometric measurements were not different between smokers and monsmokers. Caloric intakes(2335㎉) in adolescent smokers tended to be higher than that of nonsmokers (2,175㎉) but the difference was not statistically significant. Intakes of protein(76.67g) and niacin(16.49㎎) in adolescent male smokers were significantly higher(P<0.05) than those of nonsmokers although other nutrient intakes were not significantly different. Analysis of serum lipids showed that serum HDL-cholesterol level of smokers was significantly different. Analysis of serum lipids showed that serum HDL-cholesterol level of smokers was significantly lower(p<0.05) than that of nonsmokers, whereas other lipid levels were not significantly different. Serum vitamin C level was also significantly lower(p<0.05) in adolescent smokers than in nonsmokers. In addition, serum vitamin E level, which was 7.85㎎/1 in smokers, was lower than that of 9.20㎎/1 in nonsmokers(p<0.05) while serum vitamin A level was not significantly different between the two groups. These results indicate that cigarette smoking in adolescence decreases serum levels of HDL-cholesterol, vitamin C and vitamin E even thoughth their smoking history is very short. (Korean J Community Nutrition 3(3) : 349∼357, 1998)