Fog Nozzle-Greenhouse Cooling System Analysis

포그노즐을 이용한 온실냉방시스템 분석

  • 김영중 (농업기계화연구소 시설기계과) ;
  • 유영선 (농업기계화연구소 시설기계과) ;
  • 윤진하 (농업기계화연구소 시설기계과) ;
  • 오권영 (농업기계화연구소 시설기계과) ;
  • 김승희 (농업기계화연구소 시설기계과)
  • Published : 1997.03.01

Abstract

Among the various vegetables eggplant and gourd family can stand against high temperature environmental condition, about 35$^{\circ}C$. However, most of greenhouse farmers are giving up crop cultivation during hot summer season due to extreme temperature, 4$0^{\circ}C$ or above, condition of greenhouse interior. To improve this inferior crop growth condition, for nozzle system was installed in the pet greenhouse and the effect of fog system was investigated in order to determine fog water amount and the required fog nozzle numbers according to house volumes. MEE fog nozzle was selected for this Investigation which can produce water particle size of 27${\mu}{\textrm}{m}$ with water amount of 100$m\ell$ at pumping pressure of 70kg/$\textrm{cm}^2$. House cooling test was conducted in the pet greenhouse with one minute fogging and one minute air ventilation without stopping. It maintained 32$^{\circ}C$ at the house interior when the atmosphere and the house temperature were 35 and 4$0^{\circ}C$, respectively. And, an experimental equation was developed through calculating the changes of relative humidity and temperature with psychrometric equation which revealed the moisture transfer pattern between the house air and fog system. It showed that the required water fogging amounts to reduce 1$0^{\circ}C$, 40 to 3$0^{\circ}C$, needs 80.7$\ell$ for 1-2W(8,350㎥) and 99.9$\ell$ for 3-2G-3S(10,330㎥) type greenhouse with particle size of 27${\mu}{\textrm}{m}$.

하절기 고온으로 인한 작물의 열악한 생육 환경개선을 위하여 미포그노즐을 이용하여 패트온실에서 증발 냉각 시험을 수행하였다. 본 연구에 사용된 미포그노즐의 분무특성을 말븐입자분석기로 분석한 결과 분무압 70kg/$\textrm{cm}^2$에서 분무입자의 크기는 평균 27$\mu\textrm{m}$로 나타났고, 이때의 분무량은 분당 100$m\ell$였다. 또한 평균 분무 입자의 크기가 27$\mu\textrm{m}$인 경우에 분무낙하량을 조사한 결과 낙하거리 150cm에서 총분무량의 88%가 공중에 부유하는 것으로 나타났다. 냉방시스템의 주요 구성 부분은 고압노즐, 양수펌프, 필터 및 미포그노즐 32개로 이루어졌고, 1분 분무-1분 환기로 이루어진 연속 분무 시험 결과 외기온 3$0^{\circ}C$의 조건에서 온실내 기온을 4$0^{\circ}C$에서 32$^{\circ}C$로 강하시킬 수 있었다 또한 분무시험시 측정한 온실내의 온습도 값을 psychrometric equation에 대입하여 온실내의 수분변화량을 분석할 수 있었으며, 이와 같은 분석을 통하여 온도강하정도와 온실내 공기의 절대습도비 변화량을 예측할 수 있는 실험식을 정립할 수 있었다. 이 실험식을 이용하여 우리 나라 표준형 온실 1-2W, 3-2G-3S에서 실내온도를 4$0^{\circ}C$에서 3$0^{\circ}C$로 강제 냉각시킬 때 필요한 분무수량을 분석한 결과 분무입자 27$\mu\textrm{m}$에서의 분무수량은 각각 80.7, 99.9$\ell$였으며, 포그시스템에 필요한 노즐의 수는 분당분무량 100$m\ell$의 경우 3분 분무기준으로 각각 270, 333개가 소요될 것으로 계산되었다. 앞으로 포그시스템을 활성화하기 위해서는 온실의 기상조건에 따른 증발율과 분무입자에 대한 심층적 연구가 요망된다.

Keywords