• Steel and Composite Structures
• /
• v.23 no.5
• /
• pp.611-621
• /
• 2017

This paper presents an investigation on the fire resistance of high strength fiber reinforced concrete filled box columns (CFBCs) under combined temperature and loading. Two groups of full-size specimens were fabricated. The control group was a steel box filled with high-strength concrete (HSC), while the experimental group consisted of a steel box filled with high strength fiber concrete (HFC) and two steel boxes filled with fiber reinforced concrete. Prior to fire test, a constant compressive load (i.e., load level for fire design) was applied to the column specimens. Thermal load was then applied on the column specimens in form of ISO 834 standard fire curve in a large-scale laboratory furnace until the set experiment termination condition was reached. The test results show that filling fiber concrete can improve the fire resistance of CFBC. Moreover, the configuration of longitudinal reinforcements and transverse stirrups can significantly improve the fire resistance of CFBCs.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.2E
• /
• pp.103-109
• /
• 2006

Spalling is defined as damages to concrete exposed to high temperature during fire, causing cracks and localized bursting of small pieces of concrete. As the concrete strength increases, the degree of damage caused by spalling becomes more serious due to impaired permeability. It is reported that polypropylene(PP) fiber has an important role in protecting concrete from spalling, and the optimum dosage of PP fiber is 0.2%. However, this study was conducted on non-reinforced concrete specimens. The high-temperature behavior of high-strength reinforced concrete columns with various concrete strength and various quantity of PP fibers is investigated in this study. The results revealed that the ratio of unstressed residual strength of columns increased as the concrete strength increased and as the quantity of PP fiber increased from 0% to 0.2%. However, the effect of PP fiber quantity on residual strength of column was barely above 0.2%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.5-6
• /
• 2017

Ultra high-strength concrete can prevent spalling by mixed ratio of PP and NY fiber. However, there is a lack of research on the deterioration of strength due to changes in mechanical properties after spalling prevention. In this study, the effect of high temperature on the mechanical properties of 150MPa concrete mixed with PP and NY fiber was evaluated. As a result, mixing PP and NY fiber is judge to be little effect on the mechanical properties of the 150MPa concrete at high temperature.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.453-458
• /
• 2014

A novel high birefringent polymer terahertz (THz) fiber with a suspended elliptical core is proposed in this paper. The introduction of an elliptical core can enhance asymmetry to realize high mode birefringence, and a large porous outer cladding effectively isolates the core-guided mode from interacting with the surrounding environment. A full-vector finite element method(FEM) is used to analyze the characteristics of the THz fiber. Simulation results show that the suspended elliptical fiber exhibits high mode birefringence on a level of $10^{-2}$ over a wide frequency range, and an extremely large mode birefringence(${\approx}0.06226$) is obtained when ellipticity is 0.2. Moreover, a suspended hollow elliptical core fiber is also discussed for the purpose of lower loss, however high mode birefringence and low relative absorption loss can not coexist in such a kind of fiber.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1529-1534
• /
• 2008

The aim of this study was directed at exploring the possible use of muscle fiber characteristics as new selection traits for improving both porcine lean meat production and quality. A total of 174 (114 Yorkshire, 30 Landrace, and 30 Meishan) pigs were used for this study, and lean meat production ability was estimated by backfat thickness and loin eye area. The Longissimus dorsi muscle was taken in order to measure meat quality and muscle fiber characteristics. Due to the high correlations between total muscle fiber number and most of the performance traits, all pigs were classified into three groups (low, intermediate, or high) by total muscle fiber number using cluster analysis. The high group had the highest loin eye area (p<0.001). The meat quality traits were within normal ranges as reddish pink, firm, and nonexudative (RFN) pork, but the groups classified as intermediate and high had relatively large drip loss percentages (p<0.05), produced more than twice the amount of pale, soft, and exudative (PSE) pork as compared to the low group. The group with a high total muscle fiber number was further classified, based on type 2b fiber percentage, into low or high groups by cluster analysis. The results showed that the low type 2b fiber group had good loin eye area (p<0.05), small drip loss (p<0.05), and did not produce PSE pork. For these reasons, a high total muscle fiber number, with a low percentage of type 2b fibers, may be suitable in selecting for improvements in both lean meat production and meat quality.

• Korean Journal of Agricultural Science
• /
• v.44 no.3
• /
• pp.366-374
• /
• 2017

This experiment was conducted to evaluate the growth performance, fecal score, and fecal microbial shedding in weaning pigs fed diets with different levels of fiber and protein. A total of 96 weaning piglets ($7.41{\pm}0.71kg$) were used in a 5-week trial. Pigs were allotted to dietary treatments based on initial body weight in a $2{\times}2$ factorial design with the following factors: dietary fiber (100 and 200 g/kg, respectively, during days 0 to 14; 175 and 300 g/kg, respectively, during days 14 to 35) and dietary protein (170 or 200 g/kg). There were 6 replicates with 4 pigs per pen. On day 14, pigs fed high protein or high fiber diets had heavier body weight (p < 0.05). During days 0 to 14, pigs fed high protein or high fiber diets grew faster (p < 0.05). Additionally, during days 14 to 35, an interactive effect of fiber and protein was found (p < 0.05) on average daily gain. The different levels of protein and fiber in diet did not affect the pigs' fecal scores (p > 0.05). However, feces from the high fiber group showed lower concentration of Escherichia coli (p < 0.05). In conclusion, the results of the present study indicate that a high protein diet improves the growth of weaning pigs especially during the first two weeks. Moreover, the increments in fiber level, even in the high protein diet, favorably decreased the number of E. coli.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.685-687
• /
• 2024

Fiber optic cables are used extensively for remote monitoring in applications under extreme conditions, such as at high temperatures or in ionizing radiation fields. When high temperature fiber optic cables were subjected to gamma irradiations, there was a significant loss in transmission at wavelengths < 350 nm after only 1 minute of irradiation. Negligible recovery of the fiber optic transmission with time was observed over 2 years, but the irradiation damage was almost completely reversed by high temperature annealing at 400 ℃.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.47-50
• /
• 2002

This paper presents the results of fire resistance properties of high performance concrete varying with fiber kinds and the size of metal lath in order to verify the validities of fiber on the spatting resistance by fire. Metal lath, glass fiber and carbon fiber are used to confine the concrete. According to test results, plain concrete without lateral confinement and confined concrete with glass fiber and carbon fiber show entire failure after exposed to fire, while confined concrete with metal lath take place in the form of slight surface spatting by fire, which has favorable spatting resistance of concrete. As for the effect of the size of metal lath, when the size of metal lath is more than 1.2mm of thickness, the residual strength of concrete exposed to fire maintains more than 80% of its original strength. However, glass fiber and carbon fiber does not perform desirable spatting resistance by fire due to loss of lateral confinement of fiber exposed to fire caused by melting of fiber and reducing bond strength between concrete and fiber.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.35-41
• /
• 2005

Research and development of nano fiber products is very active over the world. Physical characteristics and dyeing properties of nylon 66 nano fiber were investigated in this study. X-ray diffraction, DSC, analysis of amino end group, and water absorption were performed to get information concerning physical properties of nano fiber. Nylon 66 nano fiber was dyed with high molecular mass acid dyes. Effects of dyeing temperature, pH of dyeing solution, and concentration of acid dyes on dyeing properties such as rate of dyeing and the extent of exhaustion, were examined and compared to those of regu­lar fiber. It was found that nano fiber adsorbed acid dyes at lower temperature, got rapidly dyed, and its extents of exhaustion at specific dyeing temperature were higher than regular fiber. It was also observed that nano fiber could adsorb a large amount of acid dye without a significant loss in the extent of exhaustion. Washing fastness of the dyed nano fiber was lower by $1/2\~1$ grade, light fastness by 1 grade than the dyed regular fiber.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.4
• /
• pp.345-353
• /
• 2014

This study was evaluated influence of fluidity properties according to basalt fiber and high volume fly ash in the mortar level, as part of a basic study for development of fiber reinforced concrete using basalt fiber and high volume fly ash. In the first step, it was evaluated that fluidity properties of mortar according to replacement ratio 6 level of fly ash(10, 20, 30, 40, 50 and 60mass%) and fluidity properties of mortar according to content 5 levels of SP(1.3, 1.5, 1.7, 1.9 and 2.1%) and content 5 levels of VA(0.2, 0.4, 0.6, 0.8 and 1.0%) for dispersion of the basalt fiber, in the second step, it was evaluated that fluidity properties of mortar using High-volume fly ash (50mass%) on 3 levels of basalt fiber length (6, 20 and 30mm). Results of assessment, if after a fiber mixed, it showed that viscosity agent is more effective to improve the fluidity and fiber dispersion than superplasticizer, high volume fly ash (50%) applying the mixing, due to three properties of fly ash, showed that the improved fiber dispersibility and flow improvement.