• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.3
• /
• pp.153-160
• /
• 2018

Recent trends in high-power-density applications have highlighted the importance of designing power converters with high-frequency operation. However, conventional LLC resonant converters present limitations in terms of high-frequency driving due to switching losses during the turn-off period. Switching losses are caused by the overlap of the voltage and current during this period, and can be decreased by reducing the switch voltage. In turn, the switch voltage can be reduced through a series connection of four switches, and additional circuitry is essential for balancing the voltage of each switch. In this work, a three-level LLC resonant converter that can operate at high frequency is proposed by reducing switch losses and balancing the voltages of all switches with only one capacitor. The voltage-balancing principle of the proposed circuit can be extended to n-level converters, which further reduces the switch voltage stress. As a result, the proposed circuit is applicable to high-input applications. To confirm the validity of the proposed circuit, theoretical analysis and experimental verification results from a 350 W-rated prototype are presented.

• Laser Solutions
• /
• v.12 no.4
• /
• pp.12-16
• /
• 2009

The engineering ceramic is one of the materials advantageous in various conditions with high strength, endurance at high temperature, abrasion resistance and corrosion resistance, etc. However, due to high strength and high brittleness, ceramic incurs high costs and long time on finishing process required after sintering. So a process for obtaining wanted measurements of them has been studied using the high temperature which makes ceramics softened and heat affected recently. This study makes an estimate of laser-assisted machining (LAM) if an economically practical process for manufacturing precision silicon nitride ceramic parts using laser beam. In this study, mechanical properties of silicon nitride at high temperature were observed. And during the LAM, it was observed that cutting force and tool wear were reduced and oxidation of machined surface was increased according to a increase of laser power.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.272-281
• /
• 2011

The purpose of this study is to analyze the correlation between spatial space structure and visitors' behavior and interpret visitors' behavior concretely from the aspect of exhibition environments. So, this study intends to qualify spatial space structure with integration, connectivity and control value by utilizing space syntax, limit to tracking score among the analysis index and reinterpret with exhibition density and extend of eyesight among the exhibition environments. The results of this study are as follows; First, in case of museums, tracking score shows plus correlation with connectivity and control value among the space syntax variables and very low correlation with integration. In case of art museums, tracking score shows plus correlation with integration and wide variable is judged to more useful to analyze visitor's behavior than minor variable. Second, museums doesn't make a great effect on visitors' behavior from the aspect of extent of eyesight, but from the aspect of exhibition density, visitors relatively watched evenly without short cut at the early stage of exhibition in spite of high exhibition density. And, they conducted short cut as they went to the middle stage of exhibition on the course of watching although the numerical value of exhibition density is low. Third, in case of art museums, visitors' behavior was relatively influenced by exhibition density, not extent of eyesight. But, as they went to the high level on the course of watching, watching speed became rapid and watching length became short in the place the value of extent of eyesight was high. Its reason is judged to be easy to grasp position or space structure of the next exhibition room visually. Therefore, when the concentration of watching is necessary from the aspect of exhibition, to control exhibition density properly before the space is useful to draw visiting to exhibition space afterward.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.2
• /
• pp.10-17
• /
• 1999

This paper investigates the linear stability of both uniform and non-uniform density plane mixing layers with special emphasis on the effect of the wake component in the velocity profile. Velocity and density profiles for laminar flows are obtained from analytic profiles. Mixing layers with wakes have two generalized inflection points and two unstable modes-sinuous and varicose modes. For uniform density mixing layers, sinuous modes are more unstable than varicose modes, which shows wakes will be destabilized by sinuous modes. For non-uniform density mixing layers with high density in high speed flows, sinuous modes are more unstable than varicose modes. For non-uniform density mixing layers with high density in low speed flows, varicose modes can be more unstable than sinuous modes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.125-132
• /
• 1995

Studies were made on differences among types and varieties of rice in stomatal density and gas diffusion resistance, and on the relationship between these traits and photosynthetic rate. Significant differences among types and varieties were found stomatal density and gas diffusion resistance. Generally, stomatal density was higher in indica varieties than in Japonica varieties, gas diffusion resistance was lower in the former than in the later, in varieties developed through indica-japonica hybridization it was intermadiate. The stomatal density was closely positively correlated with the gas conductivity and the net photosynthetic rate, was not correlated with single leaf area, and had significant negative correlation with specific leaf weight. Higher photosynthetic rate of indica varieties mainly results from its high stomatal density and low gas diffusion resistance. The result also suggested that high photosynthetic rate might be obtained if the high stomatal density and low gas diffusion resistance in indica could be combined with the larger specific leaf weight in japonica through crossing between two.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.88-88
• /
• 2017

The study was conducted to analyze the growth characteristics comparison per planting density on the waxy corn early-planting culture for the paddy field in the southern province of south Korea. The cultivation period of early-planting culture for the paddy farming of the waxy corn are sown on February 15, 2016years, transplanting March 15 and harvest June 20. And it grew 126 days. The weather change according to the cultivation period of unheated plastic house early-planting culture, it was average temperature $14.6^{\circ}C$ and humidity 62.5%. And the temperature was 5.6 degrees Celsius warmer compared with the outside temperature and the humidity was 0.7 percent higher tendency. At the growth per planting density of waxy corn, culm length was average 224cm, the more it is high density culture the more was high trend. Stem diameter and ear length the more it is high density culture the more was lowed trend. The node number of $60{\times}20Cm$ was 12 nodes, fruit seting 5.7 nodes, tasseling number 94 days and silking number 96 days. In the ear characteristics per planting density, the size of ear length, seed setting length, ear width and ear weight the more planting density is high the more lowed that trend. The commodity percentage of planting density $60{\times}35Cm$ was the highest among other treatment as 69.1%. But, marketable yield was the highest planting density of $60{\times}20Cm$ as 4,543 ears/10a, and appeared in order $60{\times}25Cm$ 95%> $60{\times}30Cm$ 93%> $60{\times}35Cm$ 92%. The planting density on the waxy corn early-planting culture for the paddy farming in the southern province, the planting density analyzed to be effective planting of over 25% than normal season culture.

• Atmosphere
• /
• v.30 no.2
• /
• pp.169-181
• /
• 2020

We conducted a study on the impact of observation station density; this was done in order to enable the accurate estimation of spatial meteorological variables. The purpose of this study is to help operate an efficient observation network by examining distributions of temperature, relative humidity, and wind speed in a test area of a three-dimensional meteorological observation project in the Yeongdong region in 2019. For our analysis, we grouped the observation stations as follows: 41 stations (for Step 4), 34 stations (for Step 3), 17 stations (for Step 2), and 10 stations (for Step 1). Grid values were interpolated using the kriging method. We compared the spatial accuracy of the estimated meteorological grid by using station density. The effect of increased observation network density varied and was dependent on meteorological variables and weather conditions. The temperature is sufficient for the current weather observation network (featuring an average distance about 9.30 km between stations), and the relative humidity is sufficient when the average distance between stations is about 5.04 km. However, it is recommended that all observation networks, with an average distance of approximately 4.59 km between stations, be utilized for monitoring wind speed. In addition, this also enables the operation of an effective observation network through the classification of outliers.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.179-191
• /
• 2013

The quincunx lattice is a non-separable sampling method in image processing. It treats the different directions more homogeneously and good frequency property than the separable two dimensional schemes. The high density discrete wavelet transformation is one that expands an N point signal to M transform coefficients with M > N. In two dimensions, this transform outperforms the standard discrete wavelet transformation in terms of shift-invariant. Although the transformation utilizes more wavelets, sampling rates are high costs. This paper proposed the high density discrete wavelet transform using quincunx sampling, which is a discrete wavelet transformation that combines the high density discrete transformation and non-separable processing method, each of which has its own characteristics and advantages. Proposed wavelet transformation can service good performance in image processing fields.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.167-174
• /
• 2003

Fatigue damage of 2.2Ni-1Cr-0.5Mo steel used fir high strength pressure tubes and vessels was evaluated using uniaxial specimens subjected to strain-controlled fatigue loading. Based on the fatigue test results from different strain ratios of -2. -i 0, 0.5, 0.75, the fatigue damage of the steel was represented by using a cyclic strain energy density. Mean stress relaxation depended on the magnitude of the applied strain amplitude. The high pressure vessel steel exhibited the cyclic softening behavior. Total strain energy density consisting of the plastic strain energy density and the elastic tensile strain energy density described fairly well the fatigue life of the steel, taking the mean stress effects into account. Compared to other fatigue damage parameters, fatigue life prediction by the cyclic strain energy density showed a good correlation with the experimental fatigue lift within a factor of 3.