• 한국초전도ㆍ저온공학회논문지
• /
• 제16권2호
• /
• pp.1-6
• /
• 2014

The five-year national project in Japan for R&D of coated conductors and applications, named as the Materials and Power Applications of Coated Conductors (M-PACC) project, was finished at the end of FY2013. The project consists of four sub-themes as cable, transformer, SMES and coated conductors. In the theme of coated conductors, the fabrication process had been developed to satisfy the requirements from the applications such as in-field $I_c$ performance, low AC loss in the long tapes etc. Through the project, the remarkable progress was achieved as follows; a high in-field minimum $I_c$ value over 54A/cm-width under 3T at 77K was realized in a 200m long EuBCO tape with artificial pinning centers of $BaHfO_3$ by the pulsed laser deposition (PLD) technique on the IBAD template. On the other hand, the AC loss reduction was confirmed in the tapes fabricated by both PLD and the metal organic deposition (MOD) techniques by scribing 100m tapes into 10-filamments. Additionally, the mechanism of the delamination phenomenon was systematically investigated and the strength was improved by eliminating the origins of the weak points in the films. Through the development, all targeted goals were accomplished and the several results were appreciated as a world champion data.

• 한국축산식품학회지
• /
• 제27권3호
• /
• pp.382-386
• /
• 2007

본 연구는 비육돈에서 지방세포지방산결합단백질(A-FABP) 유전자의 유전자형과 도체형질의 상관관계를 조사하였다. 유전자 A-FABP의 프로모터 영역에 대해 HinfI-RFLP를 이용하여 유전자형을 조사한 결과 두 가지 유전자형(-406T/T T/C)들이 발견되었고 C/C는 발견되지 않았다. 유전자형 중 -406C/C 동형접합자가 발견되지 않는 이유는 비육돈 생산에 관여하는 돼지 품종들 중에서 Duroc 품종만이 이 유전자에 대한 고도의 다형성을 나타내기 때문으로 추정되었다. 유전자형 -406C/-를 나타내는 돼지들은 근내지방과 도체중이 통계적으로 유의적인 증가함을 나타내었으나 (p<0.05), 그 외의 도체형질들(조지방, 육색, 조직감, 수분 삼출도, 근육분리도)은 유의한 차이를 나타내지 않았다 (p>0.05). 본 연구를 통해 돼지 A-FABP 유전자의 -406C/- 유전자형이 근내지방에 대한 유용한 분자 마커가 될 수 있을 뿐만 아니라 다형성이 비육돈의 근내지방에 대한 유용한 분자 마커가 될 수 있으며, 특히 Duroc 품종을 최종 종모돈으로 이용할 경우 이 유전자형을 보유한 돼지를 이용하는 분자육종체계에서 marbling이 잘 된 돼지의 생산을 통한 육질 개선에 기여할 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.278-280
• /
• 1996

This paper presents a high performance AC propulsion system for electric car to improve traction capability. The presented VVVF inverter was composed of as GTO thyristor and the the controller was fully digitalized by using 32bit DSP. The improved PWM algorithms and the new adhesion control were adapted to improve traction characteristics. This system could be possible the higher reliability and flexibility. The field test results showed the higher performances characteristics of the presented system.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.184-184
• /
• 2006

We have succeeded in the preparation of high molecular weight polybenzimidazoles by solution polycondensation of 3,3'-diaminobenzidine tetrahydrochloride with isophthalic acid, terephthalic acid, or with their derivatives using polyphosphoric acid both as solvent and as condensing agent. Also, we modified phosphoric acid into fluoroalkyl-phosphonic acids[F-PA]. The main reasons are as follows, first of all F-PAs are stronger acids than PA and alkylphosphonic acids which should promote proton hopping and transport. In addition, F-PA has weaker adsorption onto Pt which help to prevent electrocatalyst poisoning and promote higher oxygen reduction activity. The ionic conductivity of 85%-H3PO4 doped membranes show $10^{-2}\;Scm^{-1}\;to\;3{\times}10^{-2}\;Scm^{-1}\;at\;150^{\circ}C$ MEA with 2 %-added electrolyte shows slightly higher cell voltage than the others.

• 천문학회지
• /
• 제22권1호
• /
• pp.25-30
• /
• 1989

We report a null detection of $^{12}CO$ emission from a sub-condensation in a High Velocity Cloud (HVC). As a consequence of this, an upper limit of $n(H_2)\frac{X(CO)}{DV/DR}{\leq}2{\times}10^{-5}$ was set. This implies that $^{12}CO$ abundance is deficient by at least a factor of 10 if the HVC is predominantly molecular, otherwise the CO abundance of the HVC might be normal.

• Progress in Superconductivity
• /
• 제1권2호
• /
• pp.81-84
• /
• 2000

A Josephson sampler circuit using high-Tc superconductor (HTS) ramp-edge junctions has been designed, fabricated, and experimentally tested. It consists of five ramp-edge junctions with a stacked groundplane and is based on single-flux-quantum (SFQ) operations. The sampler was used to measure current waveforms at picosecond and microampere resolutions. We are developing a system based on the sampler for measuring the current waveform in a room-temperature sample. And measuring current flowing through wiring in a semiconductor large-scale integrated circuit is a promising application for the HTS sampler system.

• 한국작물학회지
• /
• 제42권3호
• /
• pp.344-351
• /
• 1997

The experiment was conducted to examine the varietal variation in gelatinization of rice flour and adaptability to rice bread processing, and the interrelation among the relevant properties. IR 44 showed the lowest temperature of gelatinization onset(T$_{o}$ ) and the highest gelatinization enthalphy(ㅿH) measured by differential scanning calorimetry (DSC). The following lower T$_{o}$ was found with the order of Suweon 230＜Pusa-33-30＜T(N) 1, Daeribbyeo 1 and the next higher ㅿ.H was followed by the order of Pusa-33-30＞Suweon 230. IRAT 177 revealed the highest temperature of gelatinization onset and conclusion(T$_{c}$) and the following higher T$_{c}$ was found with the order of Pusa-33-30＞AC 27＞Nonganbyeo. The varietal range of T$_{o}$ and T$_{c}$ was 50.0~72.5$^{\circ}C$ and 70.2~87.4$^{\circ}C$, respectively. The rice materials tested can be classified by scatter diagram on the plane of upper two principal components contracted from DSC thermogram and various characteristics relevant to processing and sensory preference of rice bread by principal component analysis. AC27, Suweonjo and IR 44 among high-amylose rices showed better suitability to rice bread processing. The temperatures of gelatinization peak and conclusion of rice flour checked by DSC were significantly negatively associated with springiness of rice bread. The most properties relevant to processing and sensory preference of rice bread such as hardness, moistness, springiness, cohesiveness, specific loaf volume and distribution or size of air cell revealed the close correlation between each other.other.

• 한국포장학회지
• /
• 제22권3호
• /
• pp.95-102
• /
• 2016

본 연구에서는 진공포장재의 산소투과도와 저장온도에 따른 햄버그스테이크의 저장성과 품질변화를 조사해 보고자, PA/PE필름에 진공포장 후 냉장 저장($5^{\circ}C$)한 대조구(C)와 EVOH/PE 공중합필름에 진공포장후 냉장 저장($5^{\circ}C$)한 T1구, 그리고 PA/PE필름에 진공포장 후 냉동 저장($-18^{\circ}C$)한 T2 구로 나누어 처리하였다. T1구는 저장기간이 경과함에 따라 총균수와 Brochothrix thermosphacta균의 성장이 C구와 유사하게 이루어졌다. 그러나, Pseudomonas균은 T1구가 C구에서보다 유의적으로 낮은 균수를 보였다. VBN값은 C구에서 가장 빨리 증가하였고, 그 다음으로 T1과 T2의 순이었다. TBARS값은 T2구에서 다른 구에 비하여 저장 4일째부터 낮았고, T1 시료는 T2 시료보다 저장 14일째 낮게 나타났다. 처리구간 기계적 색도 값은 저장기간 중 일관된 변화 및 시료간 차이를 나타내지 않았다. 기계적 경도 값은 저장기간 중 지속적으로 증가하는 경향을 보였다. T1구 시료는 C구에 비하여 풍미와 이취항목에서 2일 정도 품질이 더 우수하게 유지되는 것으로 평가되었으며, 냉동시료의 경우에는 해동 후 조직감이 12일 후 상품성 기준인 5.0 미만으로 평가 되었다. 전체적 선호도는 저장 6일까지는 C 시료, 8일부터 12일까지는 T1 시료, 그리고 14일에는 T2 시료가 가장 높았다. 결론적으로, EVOH/PE 공중합필름과 같은 산소고차단성 포장재를 냉장 햄버그스테이크에 사용할 경우 풍미나 이취 등 관점에서 저장수명을 증대시키는 효과가 나타났으나, 14일 이상 장기간 저장이 요구될 경우에는 $-18^{\circ}C$에서의 냉동 보관이 추천된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.120-120
• /
• 1998

Boron nitride (BN) films have attracted a growing interest for a variety of t technological applications due to their excellent characteristics, namely hardness, c chemical inertness, and dielectrical behavior, etc. There are two crystalline phases 1551; of BN that are analogous to phases of carbon. Hexagonal boron nitride (h-BN) has a a layered s$\sigma$ucture which is spz-bonded structure similar to that of graphite, and is t the stable ordered phase at ambient conditions. Cubic boron nitride (c-BN) has a z zinc blende structure with sp3-bonding like as diamond, 따ld is the metastable phase a at ambient conditions. Among of their prototypes, especially 삼Ie c-BN is an i interesting material because it has almost the same hardness and thermal c conductivity as di없nond. C Conventionally, significant progress has been made in the experimental t techniques for synthesizing BN films using various of the physical vapor deposition 밍ld chemical vapor deposition. But, the major disadvantage of c-BN films is that t they are much more difficult to synthesize than h-BN films due to its narrow s stability phase region, high compression stress, and problem of nitrogen source c control. Recent studies of the metalorganic chemical vapor deposition (MOCVD) of I III - V compound have established that a molecular level understanding of the d deposition process is mandatory in controlling the selectivity parameters. This led t to the concept of using a single source organometallic precursor, having the c constituent elements in stoichiometric ratio, for MOCVD growth of 삼Ie required b binary compound. I In this study, therefore, we have been carried out the growth of h-BN thin f films on silicon substrates using a single source precursors. Polycrystalline h-BN t thin films were deposited on silicon in the temperature range of $\alpha$)() - 900 $^{\circ}$C from t the organometallic precursors of Boron-Triethylamine complex, (CZHs)3N:BRJ, and T Tris(dimethylamino)Borane, [CH3}zNhB, by supersonic molecular jet and remote p plasma assisted MOCVD. Hydrogen was used as carrier gas, and additional nitrogen w was supplied by either aDlIDonia through a nozzle, or nitrogen via a remote plasma. T The as-grown films were characterized by Fourier transform infrared spectroscopy, x x-ray pthotoelectron spectroscopy, Auger electron spectroscopy, x-ray diffraction, t transmission electron diffraction, optical transmission, and atomic force microscopy.roscopy.

• 공업화학
• /
• 제9권3호
• /
• pp.440-444
• /
• 1998

p-Dichlobenzene(DCB), p-dibromobenzene(DBB), p-diiodobenzene(DIB) 및 4-chlorophenyl sulfone(CPS)을 공단량체로, 그리고 N-methyl-2-pyrrolidinone(NMP)를 용매로 사용하여 고온, 고압하에서 poly(phenylene sulfide-co-phenylene sulfide sulfone), PPS/PPSS 공중합체를 합성하고 공중합 반응 특성과 합성된 공중합체들의 구조 및 열적성질에 대해 조사하였다. PPS/PPSS 공중합체의 수율은 [DBB]/[CPS] 및 [DIB]/[CPS] 공단량체 조합의 경우 [DCB]/[CPS] 공단량체 조합보다 낮은 온도인 $190^{\circ}C$에서 최고 수율을 나타내었으며 [DCB]/[CPS] 공단량체 조합의 경우는 이보다 높은 온도인 $230^{\circ}C$에서 최고 수율을 나타내어 leaving group이 I>Br>Cl의 순서로 공중합 반응이 잘 진행되었으며 이것으로부터 공중합 반응은 nucleophilic aromatic substitution(SNAr) 기구에 적합함을 알 수 있었다. [DBB]/[CPS] 공단량체 조합중에서 CPS의 공급비가 10 mol%일 때 생성된 PPS/PPSS 공중합체의 분자량은 8,330g/mol로 가장 높게 나타났다. CPS 단량체의 공급비가 30 mol% 이상일 경우 생성되는 PPS/PPSS 공중합체는 $T_m$을 나타내지 않았으나, CPS의 공급비가 10 mol%인 PPS/PPSS 공중합체 시료의 경우 $T_g$는 약 $15^{\circ}C$ 증가하였고 $T_m$은 약 $15^{\circ}C$ 감소하여 열적 성질이 향상되는 것을 볼 수 있었다. 또 중합 온도를 $240^{\circ}C$로 고정하고 [DBB]/[CPS]의 공급비를 95/5 mol%로 하여 얻어진 PPS/PPSS 공중합체는 PPS 단독 중합체보다 분자량이 높게 나타나 PPS 단독 중합체의 고결정성 및 내열성을 유지한채 PPS 단독 중합체의 결점의 하나인 중합도를 향상시킬 수 있는 방법으로 이용될 수 있다고 생각되었다.