• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.8-15
• /
• 2007

Conjugated linoleic acid (CLA) was chemically synthesized using the alkaline isomerization method of com oil. CLA-TG was synthesized by reaction with sodium methoxide. Five different treatments were devised based on differences in the amount of CLA-TG added into the pressed han. for controls, 10% of pork back fat among the total component was only added without any CLA-TG. For the first treatment, 5% of CLA-TG among the lard component added into the press ham was replaced. For the 2nd, 3rd and 4th treatments, 10%, 15% and 20% of CLA-TG was respectively replaced. Pressed ham manufactured using CLA-TG was vacuum packaged and then stored for 1, 7, 14, 21 and 28 days at $4^{\circ}C$. Samples were analyzed for chemical composition, physico-chemical properties (pH, color), and texture characteristics. Typical chemical composition characteristics (moisture, crude protein, crude fat) were not significantly different between controls and CLA-TG treatment groups. Crude fat content of CLA-TG treatment groups was significantly lower than that of controls (p<0.05). pH values of controls was higher than that of CLA-TG treatment groups. The pH of control and CLA-TG treatment groups increased significantly as the storage period increased (p<0.05). Meat color (CIE $L^*,\;b^*$) of CLA-TG treatment groups was higher than that of controls. $a^*$ values were decreased by replacement of CLA-TG, but appeared to be unaffected by storage length. There was no significant difference in texture between controls and CLA-TG treatment groups. Based on these findings, we conclude that the physico-chemical properties and texture characteristics of manufactured pressed ham were not affected by CLA-TG addition. Also, our results indicate that high-quality pressed ham can be manufactured with CLA accumulation.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.178-187
• /
• 2009

This study was carried out to investigate the effects of grape seed oil on quality characteristics of pressed ham. Five different treatments were tested based on differences in the amount of grape seed oil added to the pressed ham. As a control, 10% back fat was added without any grape seed oil. For the first treatment, 10% grape seed oil replaced a portion of the lard component added to the pressed ham. For the 2nd, 3rd and 4th treatments, 20%, 30% and 40% of grape seed oil were substituted for lard, respectively. Pressed ham manufactured with grape seed oil was vacuum packaged and stored for 1, 7, 14,21 and 28 d at $4^{\circ}C$. Samples were analyzed for chemical composition, physico-chemical properties (pH, color) and texture characteristics. Typical chemical composition characteristics (crude protein, crude fat, crude ash) were not significantly different between control and grape seed oil treatment groups. Moisture content of grape seed oil treatment groups (GSO 30% and 40%) was significantly lower than that of controls (p<0.05). There was a not clear difference in pH between control and grape seed oil treatment groups. In the 21 d of storage, pH values of all treatments were significantly higher than those of other storage days. Meat color $(CIEL^*\;and\;b^*)$ of grape seed oil treatment group (GSO 40%) was significantly higher than that of control. Whereas meat color a value of GSO 40% treatment was significantly lower than that of control. It was not clearly changed as storage time increased. There was no significant difference in texture between control and grape seed oil treatment groups, and appeared to be unaffected by storage length. Based on these findings, we conclude that the chemical composition and texture characteristics of manufactured pressed ham were not affected by grape seed oil addition. These results also indicate that high-quality pressed ham can be manufactured with increased polyunsaturated fatty acid content.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.130-137
• /
• 2008

This study was carried out to investigate the effects of olive oil on the quality characteristics of pressed ham. Five different treatments were tested based on differences in the amount of olive oil added to the pressed ham. As a control, 10% back fat was added without any olive oil. For the first treatment, 5% olive oil replaced a portion of the lard component added to the press ham. For the 2nd, 3rd and 4th treatments, 10%, 15% and 20% of olive oil were substituted for lard, respectively. Pressed ham manufactured with olive oil was vacuum packaged and stored for 1, 7, 14, 21 and 28 days at $4^{\circ}C$. Samples were analyzed for shear force value, sensory properties, TBARS values and fatty acid composition. Shear force values increased significantly during storage for all treatments. No remarkable differences were found in sensory properties (color, flavor, texture, and acceptability) between the control and olive oil treated hams, and there was no clear change with increased storage time. There was no significant difference in TBARS values between the control and olive oil treated hams. The TBARS values increased significantly during storage for all treatments. With regard to changes in fatty acid composition, the contents of C14:0-C20:4 were decreased significantly by the addition of olive oil. The saturated fatty acid and polyunsaturated fatty acid contents of the control were significantly higher than the olive oil treated hams. Higher levels of added olive oil resulted in significantly higher monounsaturated fatty acid contents. Based on these findings, we conclude that the sensory properties and lipid oxidation (TBARS) of manufactured pressed hams are not affected by olive oil addition. These results also indicate that high-quality pressed ham can be manufactured with increased monounsaturated fatty acid content.

• Food Science of Animal Resources
• /
• v.23 no.2
• /
• pp.128-136
• /
• 2003

This study was peformed to evaluate physico-chemical and textural properties, and shelf-life effect of low-fat functional sausages(LFFS) manufactured with sodium lactate(SL), lac color and various molecular weights of chitosans(low=1.5 kDa, medium=30∼40 kDa and high=200 kDa) during storage at 4$^{\circ}C$ for 8 weeks. LFFS had a pH range of 6.39∼6.50, 76∼78% moisture, <2% fat, 14∼15% protein. The combination of SL and low molecular weight(MW) of chitosan improved water holding capacity(WHC), however those of SL and medium MW of chitosan reduced WHC. Vacuum purge(VP) reduced with increased MW of chitosans during refrigerated storage. The addition of chitosans reduced the lightness and yellowness, but increased the redness values, which was comparable to the sodium nitrite concentration between 75 and 150 ppm. LFFS containing SL and medium MW of chitosan increased most texture profile analysis(TPA) values, as compared to controls with 75 and 150 ppm. The addition of SL in LFFS retarded the microbial growth for Listeria monocytogenes, however no synergistic effect with the addition of chitosans were observed. E coli O157:H7 and Salmonella typhimurium reduced during refrigerated storage, regardless of SL and chitosan treatments. Increased storage time increased values for VP, yellowness and textural properties. These results indicated that the combination of SL and various MW of chitosans affected the functional and textural properties, and inhibited the microbial growth for LM effectively. In addition, 0.5% lac color as a replacer for sodium nitrite improved the color development, resulting in similar hunter color values, which was comparable to the sodium nitrite concentration between 75 and 150 ppm.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.253-260
• /
• 2005

Salt accumulation in the plastic film house soils under continuous cultivation condition causes problems such as salt damages to plants, nitrate accumulation in vegetables, groundwater contamination, etc. due to excess application of fertilizers. Objective of this research was to find an optimum adsorbent to reduce salt concentration in the soil solution of plastic film house soils, where crop injuries have been observed due to the salt accumulation. The soils were significantly high in available P $(1,431{\sim}6,516mg\;kg^{-1}),\;NO_3-N\;(117.60{\sim}395.73mg\;kg^{-1})$, exchangeable Ca $(4.06{\sim}11.07\;cmol_c\;kg^{-1})$ and Mg $(2.59{\sim}18.76\;cmol_c\;kg^{-1})$, as compared to those of the average upland soils in Korea. Soils were treated with each of adsorbent such as ion-exchange resin, zeolite, rice bran, etc. at 2% level and prepared into saturated-paste samples. After equilibrium, soil solution was vacuum-extracted from the soil and measured for changes of the pH, EC, and concentrations of $Ca^{2+},\;Mg^{2+},\;K^+,\;Na^+,\;{NH_4}^+,\;{PO_4}^{3-}\;and\;{NO_3}^-$. Rice bran effectively removed ${PO_4}^{3-}\;and\;{NO_3}^-$ in the soil solution up to 100%. Efficiency was decreased in the orders of rice bran > ion-exchange resin > zeolite. Removal efficiencies of zeolite and ion-exchange resin for $Ca^{2+}$ were ranged from 1 to 65% and from 7 to 61%, respectively. Ion-exchange resin was also effective for removing $Mg^{2+},\;K^+,\;Na^+,\;and\;{NH_4}^+$. Overall results demonstrated that rice bran and ion-exchange resin could be applicable for salt accumulated soil to remove the respective anion and cation.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.112-118
• /
• 1995

The effect of various packaging methods on kimchi quality was investigated in order to develop the packaging techniques for preventing commercial kimchi products from inflation and explosion, due to fermentative gas evolved during storage and distribution. Kimchi was packaged in different methods; 1) atmospheric packaging(AP), 2) check valve packaging(CV), 3) double packaging(DP), and 4) vacuum packaging(VP). The quality of kimchi during storage at $10^{\circ}C$ was evaluated in terms of gas composition, free volume, pH, titratable acidity color index and sensory properties. The gas composition inside packages showed different curves according to the packaging methods. Due to fermentative gas accumulation in both AP and CV, $CO_2$ concentration increased by 2 stepwise pattern, while $O_2$, concentration decreased exponentially. In DP, $O_2$ concentration remained constant, but $CO_2$ concentration increased by 2 stepwise pattern and then decreased. In contrast, VP produced low $O_2$ and high $CO_2$ concentrations only at the end of storage. The free volume in both AP and CV showed typical sigmoidal curves similar to $CO_2$ concentration changes. It remained constant in DP, but started to increase at the late stage of storage in VP. There was no significant effect of packaging methods on pH changes of kimchi. In titratable acidity, DP maintained relatively higher than others. Regarding to the color change of crushed kimchi juice in all packages, L and b values decreased exponentially but a value remained constant during storage. Color index(L b/a) of crushed kimchi juice decreased exponentially and remained constant at the end of storage. The growth of lactic acid bacteria was VP, CV, AP, DP in increasing order. In sensory test, the sourness scores of DP were fairly higher than those of others, but the texture was not significantly affected by the packaging methods. The preference for kimchi showed VP>AP, CV>DP in order of score. In this study, it could be proposed to employ DP and VP method as the effective packaging techniques for preventing commercial kimchi products from inflation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.166-172
• /
• 2002

The top shell, Omphalius pfeifferi capenteri meat vacuum-packed in can (diameter$\times$height, 74.1mm$\times$50.7mm) were heated at 115$^{\circ}C$ up to $F_0$ values of 5 min, 10 min, 15 min and 20 min, and the changes in food components were studied. After 14 days storage at 37$^{\circ}C$ and 55$^{\circ}C$, no growth of microorganism and panelling were recognized from the canned meats which were sterlized at 115$^{\circ}C$ with $F_0$ value of S min and over. In the case of proximate composition of the canned meats, the moisture content decreased with the increase of $F_0$ value, while crude protein increased. The increase of volatile basic nitrogen content, pH and degree of browning and the decrease of mineral, total amino acid, free amino acid, trimethylamine oxide, total creatinine contents and yields were observed during thermal processing, In sensory evaluation on color, texture and taste in the canned meats, no significant difference was observed among a boiled sample and the canned meats heated at re value of 10 min and below. But, in the canned meats heated at $F_0$ value of over 15 min, its sensory scores decreased with the increase of $F_0$ value. From these results, the reasonable $F_0$ value for preparation of the heat-treated top shell meats was in the range of 5$\~$10 min.

• Journal of the Korean Magnetics Society
• /
• v.19 no.3
• /
• pp.89-93
• /
• 2009

Amorphous $Ge_{1-x}Mn_x$ semiconductor thin films grown by low temperature vapor deposition were annealed, and their electrical and magnetic properties have been studied. The amorphous thin films were $1,000{\sim}5,000\;{\AA}$ thick. Amorphous $Ge_{1-x}Mn_x$ thin films were annealed at $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$ and $700^{\circ}C$ for 3 minutes in high vacuum chamber. X-ray diffraction analysis reveals that as-grown $Ge_{1-x}Mn_x$ semiconductor thin films are amorphous and are crystallized by annealing. Crystallization temperature of amorphous $Ge_{1-x}Mn_x$ semiconductor thin films varies with Mn concentration. Amorphous $Ge_{1-x}Mn_x$ thin films have p-type carriers and the carrier type is not changed during annealing, but the electrical resistivity increases with annealing temperature. Magnetization characteristics show that the as-grown amorphous $Ge_{1-x}Mn_x$ thin films are ferromagnetic and the Curie temperatures are around 130 K. Curie temperature and saturation magnetization of annealed $Ge_{1-x}Mn_x$ thin films increase with annealing temperature. Magnetization behavior and X-ray analysis implies that formation of ferromagnetic $Ge_3Mn_5$ phase causes the change of magnetic and electrical properties of annealed $Ge_{1-x}Mn_x$ thin films.

• Journal of agriculture & life science
• /
• v.43 no.6
• /
• pp.85-93
• /
• 2009

The boiled oyster vacuum-packed in cylindrical can(No. 301-3) were thermally processed at $115^{\circ}C$ to reach Fo values of 5~20 min. The yield was slightly decreased with the increasing of Fo-values (79.2~ 83.7%), and volatile basic nitrogen (VBN) contents increased markedly with the increasing of Fo-value. In fatty acid composition of canned oyster, the composition ratio of saturates and monoenes such as 14:0, 16:0 and 18:1n9 increased, while polyunsaturated fatty acids such as 20:5n-3 and 22:6n-3 decreased with the increasing of Fo-value. In taste compounds, content of total free amino acid in raw oyster was 1,533.5 mg%, and this total content was slightly increased (1,140.8~1,266.2 mg%) with the increasing of Fo values. But contents of betaine and ionic minerals such as Na, K, Mg and P decreased markedly by thermal processing at $115^{\circ}C$. As compared with Fo 5 min. heat treatment; Fo 20 min. heat treatment at $115^{\circ}C$ became more hardened in texture of oyster meat. In sensory evaluations on organoleptic characteristics, no significant difference at 5% level was observed among the canned boiled oyster meats heated at Fo 5~15 min.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.4
• /
• pp.348-353
• /
• 2008

Oxygen isotope has not been used actively in water mass studies because of difficulties on the analysis though it has advantages as a water mass tracer. The most popular method to analysis the oxygen isotope ratio in water samples is equilibration method: isotopic equilibrium of water with $CO_2$ at constant temperature. The precision of oxygen isotope analysis using commercial automatic $H_2O/CO_2$ equilibrator is ${\pm}0.1%o$. This value is not sufficient for studies in open ocean. The object of this study is to improve the analytical precision enough to apply open ocean studies by modification of the instrument. When sample gas is transferred by the pressure difference, the fractionation which is preferential transportation of light isotope can be occurred since the long transportation path between the equilibrator and mass spectrometer. And the The biggest source of error during the analysis is long distance and large volume of the pathway of sample gas between. Therefore, liquid nitrogen trap and high vacuum system are introduced to the system. The precisions of 14 time analysis of same seawater sample are ${\pm}0.081%o$ and ${\pm}0.021%o$ by built-in system and by modified system in this study, respectively.