• 생물환경조절학회지
• /
• 제15권2호
• /
• pp.149-155
• /
• 2006

풋고추(청양)의 육묘 온도를 주간온도는 같게 하고 야간온도를 달리하여 유묘의 화아분화와 생장 및 포장에서의 생장을 조사하였다. 육묘기간 중의 야간 온도가 높을수록 고추 묘의 엽수, 지상부 생체중 및 건물중이 증가하였고, 화아분화 및 첫 개화일은 단축되었다. 정식 후 초장, 경경, 분지장, 절간장은 저온구($28/11^{\circ}C$)에서 증가한 반면 고온구($28/21^{\circ}C$)에서 억제되었다. 측지수는 고온구에서 현저히 감소되었으나 온도 처리에 따라 주경에서 발달하는 1차분지의 수는 일정한 경향을 보이지 않았다. 고추 모종의 생장은 저온구에서 억제되었다가 하우스에 정식한 후부터 점차로 회복된 반면, 고온구는 이와 반대의 경향을 보였다.

• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.304-311
• /
• 2014

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature $H_2SO_4$ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature $H_2SO_4$ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature $H_2SO_4$ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature $H_2SO_4$ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature $H_2SO_4$ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature $H_2SO_4$ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.

• 전기학회논문지P
• /
• 제67권2호
• /
• pp.106-111
• /
• 2018

Recently, due to the effect of global warming, the high temperature phenomenon continues, and the time for workers exposed to high temperature, cold and infrared is increasing and then safety is threatened. Due to the nature of on-site work, the work is being carried out in an unreasonable manner due to the process, which is exposed to disasters due to high temperature and cold. Even though the injured skin may be damaged, the worker may not be aware of it and may be injured. By understanding the working environment of the worker and calculating the risk index and expressing it on the helmet, the surrounding colleagues inform the worker of the risk and take appropriate measures so that the accident can be prevented in advance. This study was conducted to investigate the effect of exposure duration on the workers' by measuring the exposure time, the risk index is displayed in the form of a traffic light to the helm, informing neighboring workers and managers, and transmitting to the workers by voice.

• The Plant Pathology Journal
• /
• 제17권2호
• /
• pp.101-105
• /
• 2001

A disease survey on the carnation (Dianthus caryophyllus L.) wilt was conducted during the high temperature period (June through August) and the low temperature period (February through May) in 58 greenhouses of its major cultivation areas, including Pusan, Kimhae, and Changwon in Korea from 1998 to 1999. The disease incidence was averaged 5.4% and 11.9% in the low and high temperature periods, respectively. Severe damage was found in summer with high incidences of around 50% in some greenhouses. Close examination of the symptoms and isolation of the causal agent revealed that there was a new disease different from Fusarium wilt caused by Fusarium oxysporum f. sp. dianthi, which was determined as the stub dieback caused by F. was cetermined as the stub dieback caused by F. graminearum (teleomorph : Gibberella zeae). The stub dieback symptoms involved brown rot of stem that started usually from the portion of cutting without discoloration of inner vascular tissues. Seven out of 38 isolates from the wilted plants were identified as F. graminearum, while the others as F. oxysporum f. sp. dianthi. Mycological characteristics of the stub dieback pathogen including colony color, absence of microconidia, and the shape of macroconidia, were consistent with F. graminearum previously described. This is the first report of the carnation stub dieback in Korea.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.337-351
• /
• 2019

We Proposed a new technology to develop vertical type multi-joint robot system enable to adapt in high temperature environment. The main contents is a new approach to design a vertical type articulated robot with prismatic joint and analysis of thermal for process automation of casting and forging. The proposed robot is suitable to use handling working parts of casting and forging. for the manufacturing process of forging and casting. The reliability is illustrated that the proposed technique is more stable and robust than the conventional system. This study is concerned with an analytical methodology of kinematic computation for 7 DOF manipulators for optimization of forging manufacturing process.

• 한국환경과학회지
• /
• 제25권2호
• /
• pp.259-265
• /
• 2016

We analyzed diurnal variations in the surface air temperature using the high density urban climate observation network of Daegu in summer, 2013. We compared the time elements, which are characterized by the diurnal variation of surface air temperature. The warming and cooling rates in rural areas are faster than in urban areas. It is mainly due to the difference of surface heat capacity. In addition, local wind circulation also affects the discrepancy of thermal spatiotemporal distribution in Daegu. Namely, the valley and mountain breezes affect diurnal variation of horizontal distribution of air temperature. During daytimes, the air(valley breeze) flows up from urban located at lowlands to higher altitudes of rural areas. The temperature of valley breeze rises gradually as it flows from lowland to upland. Hence the difference of air temperature decreases between urban and rural areas. At nighttime, the mountains cool more rapidly than do low-lying areas, so the air(mountain breeze) becomes denser and sinks toward the valleys(lowlands). As the result, the air temperature becomes lower in rural areas than in urban areas.

• 대한원격탐사학회지
• /
• 제12권1호
• /
• pp.60-80
• /
• 1996

AVHRR(Advanced Very High Resolution Radiometer) on NOAA satellite provides data in five spectral, one in visible range, one in near infrared and three in thermal range. In this paper, application of NOAA/AVHRR data is studied for environment monitoring such as cloud top temperature, surface temperature, albedo, sea surface temperature, vegetation index, forest fire, flood, snow cover and so on. The analyses for cloud top temperature, surface temperature, albedo, sea surface temperature, vegetation index and forest fire showed reasonable agreement. But monitoring for flood and snow cover was uneasy due to the limitations such as cloud contamination, low spatial resolution. So this research had only simple purpose to identify well-defined waterbody for dynamic monitoring of flood. Based on development of these basic algorithms, we have a plan to further reseach for environment monitoring using AVHRR data.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.43-51
• /
• 2007

This paper describes the preparation and characterization of two kinds of fluorinated polybenzimidazole (PBI)s which can be potentially used for phosphoric acid-doped, high-temperature polymer electrolyte membrane fuel cells. Two kinds of perfluorocyclobutane (PFCB)-containing monomers were prepared via following synthetic steps; after fluoroalkylation of methyl 3-(hydroxy) benzoate and methyl 4-(hydroxy) benzoate with 1,2-dibromotetrafluoroethane and subsequent Zn-mediated dehalogenation, these compounds were cyclodimerized at $200^{\circ}C$ affording the ester-terminated monomers containing PFCB ether groups. The synthesized intermediates and monomers were characterized using FT-IR, $^1H-NMR,\;^{19}F-NMR$, and mass spectroscopy. The fluorinated PBIs were then successfully prepared through the solution polycondensation of the monomers and 3,3'-diaminobenzidine in polyphosphoric acid. Compared with traditional PBI, the glass transition temperatures of the fluorinated PBIs were obtained at $262^{\circ}C\;and\;269^{\circ}C$ which are lower than that of PBI and their initial degradation temperatures were still high over $400^{\circ}C$ under nitrogen. The fluorinated PBIs showed higher d-spacing values and improved solubility in several organic solvents as well as phosphoric acid, which confirmed they could be good candidates for the high temperature fuel cell membranes.

• 해양환경안전학회지
• /
• 제17권4호
• /
• pp.419-427
• /
• 2011

고온수증기전기분해(HTSE) 장치의 수소생산 및 열 화학적 특성을 파악하고자 COMSOL $^Multiphysics^{(R)}$를 사용해 2차원 정상상태 수치해석을 실시하였다. 계산을 위한 주요 파라메터로는 작동전압, ASR(Area-specific Resistance) 및 유입가스의 온도와 압력 등이다. 해석결과 1.2454 V에서 Thermal-neutral Voltage가 나타나고, 작동 전압이 증가함에 따라 Cell의 내부 온도가 단조 증가하는 것이 아니라 Thermal-neutral Voltage를 기준으로 낮은 전압에서는 Cell의 온도가 감소하고, 높은 전압에서는 Cell의 온도가 증가하였다. 또한, ASR 값이 증가함에 따라 Cell 내부의 온도는 하강하고, 수소생산율도 낮아지는 경향을 보였다.

• 한국환경보건학회지
• /
• 제38권6호
• /
• pp.460-471
• /
• 2012

Objectives: Due to global warming resulting from climate change, there has been increasing interest in the relationship between temperature and mortality. These temperature-related deaths depend on diverse conditions related to a given place and person, as well as on time. This study examined changes in the impact of high temperatures on death in summer, using the effect and burden of elevated temperatures on deaths in Seoul and Daegu. Methods: A Poisson regression model was used to estimate short-term temperature effects on mortality. Temperature-related risks were divided into three time periods of equal length (1996-2000, 2001-2005, and 2006-2010). In addition, in order to compare the impact of high temperatures on deaths, this study calculated the proportion of attributable deaths to population, which simultaneously considers the threshold and the slope above the threshold. Results: The effect and burden of high temperatures on deaths is high in Daegu. However, the impact (i.e. the effect and burden) of elevated summer temperatures on deaths has declined over the past 15 years. Sensitivity analyses using alternative thresholds show the robustness of these findings. Conclusion: This study suggests that the attributable burden of high temperatures on deaths to be more plausible than relative risk or threshold for comparing the health impact of high temperatures across populations. Moreover, these results contain important implications for the development or the adjustment of present and future strategies and policies for controlling the temperature-related health burden on populations.