• 펄프종이기술
• /
• 제48권3호
• /
• pp.5-13
• /
• 2016

This study investigated the effects of different factors on the migration of a fluorescent whitening agent (FWA) from paper treated with FWAs to non-fluorescent papers. FWA migration experiments were carried out in vertical and friction contacts between the papers dyed with FWAs and non-fluorescent papers. During the experiments, we identified the effects of the addition and types of FWAs, contact time, temperature, and relative humidity (RH) on FWA migration. The fluorescence indices of the non-fluorescent papers were measured before and after the migration experiments, and the Student's t test, a statistical tool, was utilized to compare results from different migration experiments. In vertical contact experiments, FWA migration to non-fluorescent paper was observed at $30^{\circ}C$ and 70% RH; this was attributed to the high moisture content of the paper. FWA migration did not occur significantly at $23^{\circ}C$ and 50% RH. In the friction contact experiments, FWA migrations were identified at both temperature conditions and RH percentages. The addition and types of FWAs did not increase the fluorescence index of non-fluorescent papers. Therefore, it was concluded that the moisture content of paper and the friction contact affected FWA migration from the papers containing internal and surface FWAs.

• 생태와환경
• /
• 제53권1호
• /
• pp.73-79
• /
• 2020

Metarhizium anisopliae (녹강균)는 흰점박이꽃무지에게 질병을 일으키는 곤충 병원성 곰팡이 중 하나이다. 이러한 곰팡이의 병원성은 환경 조건에 의해 영향을 받는다. 녹강균에 대한 흰점박이꽃무지 유충의 민감성을 알기 위해 온도(20℃, 25℃, 30℃), 상대습도(RH 40%, 50%, 60%, 70%), 톱밥 수분함량(40%, 50%, 60%)이 다른 사육 조건에서 유충의 치사율을 확인하였다. 녹강균을 처리한 흰점박이꽃무지 유충의 치사율은 온도에 따라 차이가 나타나지 않았으나, 낮은 상대습도(RH 40%)와 톱밥 수분함량(40%)에서 유충의 치사율이 높았다. 녹강균에 대한 1령, 2령, 3령 유충의 치사율은 1령에서 가장 높게 나타났다.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.54-59
• /
• 2006

Paperboards used for linerboard of corrugated fiberboard box were coated with different concentrations of polylactic acid (PLA) solution and the effects of harsh environmental conditions such as high humidity and temperature (96% RH at $30^{\circ}C$ for up to 5 days), and freeze-thaw ($-20^{\circ}C$ for a day and then thaw at room temperature for 30 min) conditions on the ring crush (RC) strength of the boards were investigated. One to five percent PLA solutions were coated onto SC manila linerboard ($20{\times}27cm$) using a No. 20 wire bar coater and the ring crush strength was measured using a computer-controlled Advanced Universal Testing System in accordance with TAPPI Test Method T 822 om-93. The RC strength increased significantly when the concentration of coating solution increased and appreciable changes were found when the concentration increased from 0 to 2% (P<0.05). Similar pattern of results was found after 5-day storage at $30^{\circ}C$ and 96% RH. Although such highly humid condition increased moisture content in the samples up to 3.95 from 0.97 times, the RC strength decreased in the range from 29.9 to 48.5%. The freeze-thaw treatment increased the moisture content only up to 1.27% and the reduction in the RC strength ranged from 21.1 to 28.1 %. The results were promising: the samples coated with 5% PLA solution showed 29.9% reduction in the RC strength while that of control was 48.5% during highly humid condition stated above.

• Composites Research
• /
• 제30권2호
• /
• pp.132-137
• /
• 2017

본 연구에서는 카본/BMI 면재와 노멕스 허니콤 코어를 가지는 샌드위치 포팅 체결부의 다양한 설계변수에 대한 파손특성 연구를 수행하였다. 샌드위치 시편은 코어 높이, 면재 두께 및 밀도에 따라 총 6종류가 제작되었고, 이중 1종류의 시편에 대해 온/습도 효과를 보기 위해 환경 조건이 가해졌다. 시험 결과 밀도가 $64kg/m^3$ 코어를 제외한 모든 시편에서 코어의 전단좌굴이 초기 파손모드로 나타났으며, 이후 하중을 지지하다 윗면재 파손과 동시에 아랫면재에 볼트가 파고드는 파손형상이 나타났다. 하지만 밀도에 의해 높은 강성을 가지는 시편의 경우 초기 전단좌굴 발생 없이 윗면재와 코어의 계면파손에 의해 낮은 최대파손하중을 나타냈다. 샌드위치 시편의 환경적 영향 평가를 위해 수행된 ETW1($82^{\circ}C$, Wet)과 ETW2($177^{\circ}C$, Wet)의 경우 RTD($24^{\circ}C$, Dry) 조건과 확연히 다른 초기 파손모드를 보였으며, 동일한 습도조건 하에 온도가 상승된 ETW2는 ETW1보다 전단좌굴 하중이 약 18% 감소되는 경향을 보였다.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.637-644
• /
• 2016

본 논문은 터널 환경 측정 시스템 개발 및 측정 I [1], II [2]의 후속논문이다. 본 연구의 대상이 되는 터널인 솔안터널은 백두대간을 관통하는 연장 16.7 km의 루프식 단선 터널로 산악지형에 위치하며 화물열차와 승객열차가 혼용인 일반철도 터널이다. 본 논문에서는 솔안터널의 환경 측정을 위하여 터널 내부에 3개의 위치에 설치된 환경 측정 장치에서 약 1년간 측정된 온도 및 습도를 분석하였다. 선행의 연구에서는 도심지 및 도심지 인근에 위치한 터널 내부에서 측정 결과 결과에 대하여 분석하였지만, 본 논문에서는 산악지형에 위치한 터널 내부에서 측정한 온도 및 습도 등을 외부에서의 기상 측정 결과와 비교한 것으로 선행 연구와 차별성을 지닌다. 솔안터널 내부에 측정된 온도 및 습도를 월별로 지역에서의 기상 측정 결과와 비교하였으며, 여름과 겨울을 대표하는 대표적인 일자에 대해서 철도터널에서의 시간별 온도 및 습도의 변화도 분석하였다. 또한 터널 내 측정 위치에 따른 환경 특성도 분석하였다. 본 연구에서 제시한 철도터널의 환경측정 분석 결과는 터널의 환기 및 화재 시뮬레이션 등 터널의 기류의 컴퓨터 해석 및 터널의 공기질 및 온열환경과 관련된 연구에 폭넓게 사용될 수 있다.

• 대한산업공학회지
• /
• 제40권2호
• /
• pp.223-232
• /
• 2014

Life-cycle assessment (LCA) is often employed to quantify the environmental impact of a product in a comprehensive manner. The aspects of performance and usability as well as that of eco-friendliness should be considered in an integrated manner for the market competitiveness of an eco-friendly product. The present study developed a product improvement plan for an eco-friendly electric heater by benchmarking two small-size electric heaters (companies 'H' and 'T') in terms of performance, usability, and eco-friendliness. The performance measurements such as temperature, humidity, wind speed, noise, and power consumption were collected while the two heaters were operated in a laboratory setting. Then, the usability evaluations such as aesthetics, operation satisfaction, performance satisfaction, and overall satisfaction were surveyed for the two heaters using a 5-point scale (1 for very unsatisfied and 5 for very satisfied). Lastly, the LCA analysis was conducted by following the six-step process of eco-friendly product design provided by KEITI. The analysis results of the two products being integrated with the aspects of product, service, and user, four design improvement directions such as eco-efficient, smart, modularized, and user-support were recommended for an eco-friendly electric heater. These proposed concepts would be useful to develop an eco-friendly electric heater design with a high level of market competitiveness.

• 천문학회지
• /
• 제51권6호
• /
• pp.207-214
• /
• 2018

A coelostat is often used for solar observations, because it corrects the image rotation automatically by guiding sunlight into a fixed telescope with two plane mirrors. For the purposes of education and spectroscopic observation, the solar group at Seoul National University (SNU) plans to develop the SNU coelostat (SNUC) and install it in the SNU Astronomical Observatory (SAO). Requirements of the SNUC are < 1" positioning accuracy with 30 cm beam size on the entrance pupil in the compact dome. To allow for installation in the small dome, we design a compact slope type coelostat with a 45 cm primary plane mirror and a 39 cm secondary plane mirror. The motion of the SNUC is minimized by fixing the position of the slope frame. Numerical simulations of the available observational time of the designed coelostat shows that the sun can be observed ay all times from June to early August and at least three hours in other months. Since the high accuracy driving motors installed in the SNUC can be affected by external environment factors such as humidity and temperature variations, we design a prototype to test the significance of these effects. The prototype consists of a 20 cm primary plane mirror, a 1 m slope rail, a direct drive motor, a ballscrew, a linear motion guide, an AC servo motor, a reduction gear and a linear encoder. We plan to control and test the accuracy of the prototype with varying atmospheric conditions in early 2019. After testing the prototype, the SNUC will be manufactured and installed in SAO by 2020.

• 한국재료학회지
• /
• 제17권1호
• /
• pp.31-36
• /
• 2007

Nanoimprint lithography (NIL) is a new lithographic method that offers a sub-10nm feature size, high throughput, and low cost. One of the most serious problems of NIL is the stiction between mold and resist. The antistiction layer coating is very effective to prevent this stiction and ensure the successful NIL results. In this paper, an antistiction layer was deposited by VSAM (vapor self assembly monolayer) method on silicon samples with FOTS (perfluoroctyltrichlorosilane) as a precursor for making an antistiction layer. A specially designed LPCVD (low pressure chemical vapor deposition) was used for this experiment. All experiments were achieved after removing the humidity. First, the evaporation test of FOTS was performed for checking the evaporation temperature at low pressure. FOTS was evaporated at 5 Tow and $110^{\circ}C$. In order to evaluate the temperature effect on antistiction layer, chamber temperature was changed from 50 to $170^{\circ}C$ with 0.1ml of FOTS for 1 minute. Good hydrophobicity of all samples was shown at about $110^{\circ}$ of contact angle and under $20^{\circ}$ of hysteresis. The surface energies of all samples calculated by Lewis acid/base theory was shown to be about 15mN/m. The deposited thicknesses of all samples measured by ellipsometry were almost 1nm that was similar value of the calculated molecular length. The surface roughness of all samples was not changed after deposition but the friction force showed relatively high values and deviations deposited at under $110^{\circ}$. Also the white circles were founded in LFM images under $110^{\circ}$. High friction forces were guessed based on this irregular deposition. The optimized VSAM process for FOTS was achieved at $170^{\circ}C$, 5 Torr for 1 hour. The hot embossing process with 4 inch Si mold was successfully achieved after VSAM deposition.

• 한국염색가공학회지
• /
• 제27권4호
• /
• pp.334-339
• /
• 2015

Polyketone fiber, a newly developed high strength fiber, has a tenacity and modulus similar to the paramid fiber, and can be used for reinforcing mechanical rubber goods(MRG), such as tires, hoses, and technical textiles. In addition, aliphatic polyketone, which has excellent strength, modulus, chemical stability and reasonable price, is being developed only in South Korea. It will be expected for replacement of super fiber such as aramids and increasing the technical textile market share. This paper surveys the mechanical properties of polyketone fiber yarn for technical textiles. For this purpose, two kinds of yarns are prepared, mechanical properties of coated and uncoated polyketone yarns such as tensile strength, elongation and modulus were examined before and after weather resistance test(temperature $60^{\circ}C$, humidity 60%, amount of power $0.67w/m^2$). The differences of mechanical properties between uncoated and coated yarns for high functional technical textiles and composite materials are estimated through this study.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.97-103
• /
• 2017

Polyketone fiber, a newly developed high strength fiber, has a tenacity and modulus similar to the p-aramid fiber, and can be used for reinforcing mechanical rubber goods(MRG), such as tires, hoses, and technical textiles. It will be expected for replacement of super fiber such as aramids and increasing the technical textile market share. This paper surveys the mechanical properties of polyketone fiber for technical textiles. For this purpose, dyed polyketone fabric is prepared, mechanical properties of coated and uncoated polyketone fabrics such as tensile strength, elongation and tear strength were examined before and after weather resistance test(temperature $63{\pm}3^{\circ}C$, humidity 60%, amount of power $0.35w/m^2$). The differences of mechanical properties between uncoated and coated fabrics for high functional technical textiles and composite materials are estimated through this study. The UV-stability of polyketone fabric showed obvious improvement after coating. After 168h(7day) of UV exposure, the coated fabric showed less deterioration in mechanical properties with the retained tensile strength and elongation at break greater than 22 and 17% of the uncoated polyketone fabrics values, respectively.