• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.611-625
• /
• 2021

Mg crowns were manufactured using domestic dolomite (Ca·Mg(CO₃)₂) (20~30 mm). In order to manufacture the calcined dolomite (CaO·MgO), (a) electric furnace (950 ℃, 480 min) and (b) microwave furnace (950 ℃, 60 min) processes were used. As a result of XRD analysis, it was analyzed as (a) CaO 56.9 wt%, MgO 43.1 wt% by electric furnace process and (b) CaO 55 wt%, MgO 45 wt% by microwave furnace process. Even when the decarbonation reaction time of dolomite was shortened by 1/8 in microwave furnace process compare with electric furnace process, the calcined dolomite could be produced. The hydration reaction (ASTM C 110) is a standard for the hydration reactivity of calcined dolomite, and the calcined dolomite produced by electric furnace process showed a high hydration reactivity (max temp 79.8 ℃/1.5 minutes). Such hydration reactivity was occurred by only CaO hydration reaction and that was confirmed by XRD analysis. The calcined dolomite produced by microwave furnace process showed low hydration reactivity (max temp 81.7 ℃/19.5 minutes). Such low hydration reactivity was occurred by CaO and MgO hydration reaction due to the hydration reaction of CaO thereafter occurring of the hydration reaction of MgO, and that was confirmed by XRD analysis. The prepared Mg crown were 58.8 g and 74.6 g by electric furnace and microwave furnace processes, respectively, under the reaction conditions of 1,230 ℃, 60 min, 5 × 10^-2 torr by silicothermic reduction.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.19-27
• /
• 2010

The purpose of this research was to see thermal and breaking type characteristics of waste wood for construction materials using high temperature and pressure equipment. In TG/DTA graph weight of waste wood was steeply decreased at $250^{\circ}C$, it has to be treated below $250^{\circ}C$ for construction materials. In popping test the needle-leaved tree was more broken in texture than the broad-leaved tree, especially, Chamaecyparis obtusa(W-7) was the best. The optimum result was obtained at temp. $200^{\circ}C$, pressure 3MPa among the experimental condition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.980-986
• /
• 1999

This study was done to ivestigate the fabrics thatminimized harmfulness of UVB(ultraviolet B) and that might product Vit. {{{{ {D }`_{3 } ^{ } }} by UVB. Twelve female subjects wearing in three different types i.e fabric A(UVB 100% protection) fabric B(UVB 50% protection) and bikinii were exposed to outdoor environment (Air Temp : 25℃, 42% R,H Air velocity : 0.13m/s UV does :6KJ/m2) Blood samples were taken 24 hours before the after the experiment in order to examine concentration of vit.{{{{ {D }`_{3 } ^{ } }} in the blood. During the experiment axillary temperature skin temperature of 7 areas(forehead Chest Upper arm, Hand Thigh Lower leg, Foot) were measured. The more irradiated areas by UVB were the more the concentration of serum 25(OH){{{{ {D }`_{3 } ^{ } }} were significantly. Mean skin temperature was significantly low levekl in wearing the fabric of UVB 50% protection (p<0.001) Axillary temperature was significantly high level in wearing the fabric of UVB 50% protection (p<0.001). Therefore the fabric of UVB 50% protection intercepts the radiation and has advantage to give off body heat over other fabrics

• Journal of Korean Medical classics
• /
• v.19 no.2 s.33
• /
• pp.97-107
• /
• 2006

From the study on the relation of voice and O-jang(五臟廳), the conclusion is as follows. The function of breathing out in larynx is involved with lung and kidney. Lung press out the air, at the same time, kidney supports that to maintenance the density of air constantly. So the person who has short breathing can not make strong voice, and also if having a weak kidney in upper Cho[下蕉], their voice will be changed so very softly to cannot make hard type of voice and lingering sounds. Opening and Closing of vocal cords are controled by liver and spleen. when vocal cords are contracted, liver makes tension, whereas spleen does in slackness. So liver is likely to make high-piched sounds in tension of vocal cords, and spleen is the same to do smoothy and husky sounds through relaxing the vocal cords. In the rising condition of liver function, the temp of speech become fast, and more the pronunciation is clearer, it means that the function of thinking by spleen is operated well. Otherwise, indistinct pronunciation means that in the body seup-sa(濕邪) spreads. Also depression of emotion in speech often makes Gi(氣) of heart weaker, whereas it means regular condition of heart including Simpo(心包) that expression of emotion looks happy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.118-122
• /
• 1996

1wt% Pt/MoO$_3$ gas sensors for detecting H$_2$ gas were fabricated by the pressed pellet method and surface structures of Pt/MoO$_2$ were investigated by TEM and XRD. It was observed that as the calcination temperature is increased, the overlayers of MoO$_3$ on Pt are produced, but the Cl content in PtCl$\_$x/ are decreased. H$_2$ gas sensing properties in N$_2$ ambient and in air ambient were investigated, respectively, and Pt/MoO$_3$ had high sensitivity at low working temp ; 7.8% at 50$^{\circ}C$, 97.7% at 100$^{\circ}C$, 97.1% at 150$^{\circ}C$ when the specimens are treated at 400$^{\circ}C$, and 99.6% at 150$^{\circ}C$ when they are treated at 200$^{\circ}C$. It shows the development of a low-power type sensor is possible by using Pt/MoO$_3$.

• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.298-310
• /
• 2011

Recently the traffics and transportation hazzards by fog are tremendously Increased. There occurred the greater traffic disaster by Dense Fog of Oct.2006. In this study frequent occurrences of advection fogs centerd over Honam Prov are investigated. Increment of transportation during the Fog period for 1996~2005(decade)are statistically analyzed with Honam Prov.'s fogs. For Honam west coast(Gunsan, Mokpo), inland of Honam(Junju, Gwangju, Suncheon), Honam south coast(Wando, Yepsu), Wind, Dew point, Diff. of air and sea temp. relative humidity are classified between 12 hours before and on time of fog with three Dimensional Analysis System(KLAPS). High frequencies of advection-radiation Fog occurrence in western Coasts except for Suncheon. The application of fog characteristics analyzed by KLAPS for denser fog over the western coast in Fall to Fog prediction and special advisory issues. The advection-radiation fog can occure favorably when the moisture index is less than $2^{\circ}C$, relative humidity is greater than 90%, but the moisture depth is under 1.5 km. In addition when the height of 925 hPa is rising, then fog occurs, but for sinking is disappearing.

• Toxicological Research
• /
• v.33 no.2
• /
• pp.119-124
• /
• 2017

Hexavalent chromium is a bio accumulative toxic metal in water and fish. It enters aquaculture ponds mainly through anthropogenic sources. Hexavalent chromium concentrations and its effects on the morphology and behavior of Clarias gariepinus were investigated from four aquaculture ponds for 12 weeks. Chromium was measured using diphenyl carbohdrazide method; alkalinity and hardness were measured using colometric method and analyzed with Bench Photometer. Temperature and pH were measured using pH/EC/TDS/Temp combined tester. Temporal and spatial replications of samples were done with triplicates morphological and behavioural effects of the metal on fish were observed visually. Chromium ranged from no detection to 0.05 mg/L, alkalinity 105 to 245 mg/L, hardness 80 to 165 mg/L, pH 6.35 to 8.03 and temperature 29.1 to $35.9^{\circ}C$. Trend in the chromium concentrations in the ponds is natural > earthen > concrete > collapsible. There was a significant difference (P < 0.05) in chromium, alkalinity, water hardness, pH and temperature among the four ponds. Significant positive correlation also existed between alkalinity, water hardness, pH, with chromium. Morphological and behavioural changes observed in the fish include irregular swimming, frequent coming to the surface, dark body colouration, mucous secretion on the body, erosion of gill epithelium, fin disintegration, abdominal distension and lethargy. High chromium concentration in natural pond was due to anthropogenic run-off of materials in to the pond. Acidic pH, low alkalinity, low water hardness also contributed to the high chromium concentration. Morphological and behavioural changes observed were attributed to the high concentrations, toxicity and bio accumulative effect of the metal. Toxicity of chromium to fish in aquaculture could threaten food security. Watershed best management practices and remediation could be adopted to reduce the effects of toxicity of chromium on pond water quality, fish flesh quality and fish welfare.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.1-9
• /
• 2008

Fiber Reinforced Polymer (FRP) composites are used extensively in aerospace, marine, automotive, infrastructure, chemical processing and sporting good applications. A concern with using FRP composites in some engineering structures is their high flammability and poor fire resistance In this research, material properties of FRP composites at increasingly high temperatures was measured and verified. The obtained mechanical properties of FRP composites were performed according to ASTM D3039/D3039M and tested to a wide range of heat conditions with temperatures from Room-temp. to 300 for times up to 30 min. It is found that the mechanical properties of FRP composites dropped with increasing heat or temperature. The reduction to the properties was due mainly to thermal degradation and combustion of the polymer matrix.

• Journal of Environmental Science International
• /
• v.24 no.12
• /
• pp.1601-1608
• /
• 2015

This study evaluates heavy metal(Cu and Cr) adsorption characteristics produced from food waste charcoal extracted in an optimal operation condition after analyzing activated charcoal of iodine adsorption and heavy metals that derived from an activation process of carbide by the developed by-products of food waste treatment facility using the methods from previous studies. As experiment apparatus, this study used a tube-shaped high temp furnace. The mixing ratio of by-products of food waste treatment facility, carbide, and activation component($ZnCl_2$) was 1:1. The experiment was proceeded as adjusting the activation temperature from 400 to $800^{\circ}C$ and activation time from 30 to 120 minutes. The optimal activation condition for iodine absorption was 90 minutes at $700^{\circ}C$ and by using the produced food waste charcoal, this study conducted an experiment on absorption of heavy metals (Cu and Cr) as changing pH of artificial wastewater and stirring time. As a result, pH 7 showed the highest heavy metal decontamination ratio and in terms of stirring time, it revealed balance adsorption after 10 minutes. This result can be particularly applied as basic data for recyclability of high concentration organic waste, by-products of food waste treatment facility, as an food waste charcoal.

• Laser Solutions
• /
• v.7 no.2
• /
• pp.1-10
• /
• 2004

This work was attempted to join SCP sheet and STS304 sheet by using Nd:YAC laser beam. SCP sheet has good formability and low cost, while STS304 has excellent corrosion resistance and mechanical properties in high temp. In this experiment, butt joint type was used to develop the tailored blank welding for dissimilar steel. Sheets which have different thermal properties. Computer simulation was conducted to obtain the off-set position for efficient welding by considering laser power, scanning speed, focal length and basic properties. The result showed that the optimum thermal distribution was obtained when the laser beam was irradiated at $0.05{\sim}0.1$ mm off-set toward the SCP sheet side. The experiment was conducted based on the result of computer simulation to show the same optimum conditions. Optimum conditions were 3KW in laser beam power, 6m/min in scanning speed, -0.5mm in focal position, 0.1mm off-set toward SCP. Microhardness test, tensile test, bulge test, optical microscopy, EDS, and XRD were performed to observe the microstructure around fusion zone and to evaluate the mechanical properties of optimum conditions, The weld zone had high microhardness values by the formation of the martensitic structure. Tensile test measured the strength of welded region by vertical to strain direction and the elongation of welded region by parallel to strain direction. Bulge test showed $52\%$ formability of the original materials. Bead shape, grain size, and martensitic structure were observed by the optical microscopy in the weld zone. Detailed results of EDS, XRD confirmed that the welded region was connected of martensitic structure.