• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.337-339
• /
• 2001

High speed brushless permanent magnet (PM) machines are a key technology for electric drives and motion control systems for many application, since they are conductive to high efficiency, high power density small size and low weight. Proposed slotless PM machine is constructed without stator winding slots. Its stator magnetic material is in the form of a ring and winding have a toroidal configuration and its rotor consists of a 4-pole Halbach array or radially magnetized PM rotor.

• 전기학회논문지
• /
• 제63권10호
• /
• pp.1371-1376
• /
• 2014

In this paper, 4-phase switched reluctance motor(SRM) with 8-stator and 6-rotor pole structure is proposed for a high speed fan with a low voltage. The air blower has unidirectional rotation characteristics and requires a low torque ripple and noise as well as high efficiency. To achieve the requirements, voltage and current according to loading condition of limited specification is considered. Design process is to select the bore diameter, pole arc, york of stator and rotor to get a high torque and efficiency. To verify the validity of the proposed structure, finite element method(FEM) is employed to get the performances. And the converter for the proposed SRM is employed a 1.5q power converter for cost effectiveness. Prototype SRM is manufactured and tested, and the test results show this design is within the specification and good for the air blower applications.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.784-791
• /
• 2000

To improve the uniformity of slurry spreading and to reduce the odor problem, a hose slurry spreader was developed, which spread the slurry near to the surface of the soil. First, the uniformity of slurry spreading was investigated. The best result of 8.1 ％ CV was obtained at the rotor speed of 250 rpm than any other speeds for the swine slurry, which contains 13.6% of dry matter. In case of dairy cattle slurry, which contains 8.2% of dry matter, the uniformity has the best result of CV 7.2% by high rotor speed of 330 rpm. A high speed of rotor has built a sufficient pressure in the distributor and discharged a uniform quantity of slurry through the hoses. Therefore, in practical use one should work with rotor speed over 300 rpm to maximize the uniformity of slurry spreading. Second, odor test was done with the swine slurry. While the conventional spreader shows ∑ value 440, the hose slurry spreader and its combination of disk harrow show ∑ value 258 and 184 respectively. With the air dilution sensual test and a 3-point odor bag, the conventional spreader shows 66.9 or 35.4 point and by the hose slurry spreader is 9.7 or 11.1 point. So, the developed spreader was found to have a greater effect on the reduction of odor problem. Finally, it is recommended to spread certain amount of the slurry for paddy field equivalent to the chemical fertilizer based on the N-content. It means 22 tons of swine slurry per ha. Since most of the livestock farms possess less arable land, a system of linking farms is necessary to utilize the slurry crossover the farms. The cost of slurry utilization including filling, transport spreading and brokerage is 3200-6800 Won/㎥ in accordance with the transport distance.

• The Journal of the Acoustical Society of Korea
• /
• 제15권4E호
• /
• pp.37-44
• /
• 1996

To get accurate vibration analysis of rotor-bearing systems, finite element models of high speed rotating shaft, unbalance disk, and fluid film journal bearing are developed. The study includes the effects of rotary inertia, gyroscopic moment, damping, shear deformation, and axial torque in the same model. It does not include the axial force effect, but the extension is straighforward. The finite elements developed can be used in the analysis design of any type of multiple rotor bearing system. To show the accuracy of the models, numerical examples are demonstrated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.269-271
• /
• 1998

Reluctance Synchronous Motors(RSM) with new rotor shape are considered in this paper. Since the stator of a RSM is similar as that of an induction motor, attention is focused here on the rotor structure. We have designed the parameter of RSM and analyzed the characteristics of the electromagnetic energy conversion.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.714-722
• /
• 2018

This paper presents a wide-range speed control scheme of brushless DC (BLDC) motors based on a hall sensor with separated low- and normal-speed controllers. However, the use of the hall sensor signal is insufficient to detect motor speed in the low-speed region because of low sensor resolution and time delay. In the proposed method, a micro-stepping current control method according to the torque angle variation is presented. In this mode, the motor current frequency and rotating angle are determined by the reference speed without the actual speed fed by the hall sensor. The detected torque angle is used to adjust the current value in a limited band to control the current value in accordance with the load. The torque angle is detected exactly at the changing point of the hall sensor signal. The rotor can follow the rotating flux with the variable torque angle. In a normal speed range, the conventional vector control scheme is used to control the motor current with a PI speed controller using the hall sensor. The torque characteristics are analyzed on the basis of the back EMF and current shape. To adopt the vector control scheme, the continuous rotor position is estimated by the measured speed and hall sensor position. At the mode changing point between low and normal speed range, the proper initial current command and reference rotor position are calculated. The calculated current command can reduce the torque ripple during transient mode. The proposed method is simple but effective in extending the speed control range of a conventional BLDC motor with hall sensor without the need for a high-resolution encoder. The effectiveness of the proposed method is verified by various experiments on a practical BLDC motor.

• 한국항공우주학회지
• /
• 제38권6호
• /
• pp.519-529
• /
• 2010

본 연구에서는 주로터, 동체, 그리고 꼬리로터를 포함한 UH-60A 전기체 형상에 대한 비정상 유동 해석을 수행하였다. 개발된 로터해석용 유동 해석코드를 이용하여 고속 전진 비행 및 저속 전진비행 조건에 대한 해석을 수행하였으며, 해석코드의 검증을 위해 주로터에서의 비정상 공력 하중을 비행시험 및 타 연구자들의 해석 결과와 비교하였다. 주로터만 존재하는 형상, 주로터와 동체만 존재하는 형상, 그리고 꼬리로터만 존재하는 형상에 대한 해석 결과를 전기체 형상에 대한 해석 결과와 비교함으로써 헬리콥터 각 컴포넌트 간의 공기력 간섭현상을 분석하였다. 동체는 주로터에서 발생하는 내리흐름 분포를 변화시킴으로써 주로터의 수직력 분포를 변화시키는 요인이 됨을 확인하였으며, 주로터 끝단으로부터 발생한 와류와 꼬리로터 블레이드가 충돌함에 따라 강한 간섭현상이 발생함을 확인하였다

• Composites Research
• /
• 제14권3호
• /
• pp.77-89
• /
• 2001

초고속 일체형 주축의 공진주파수가 일체형 주축 시스템의 모터 회전자의 질량과 주축의 굽힘 강성에 의존하기 때문에 초고속 주축 시스템의 동적 특성을 향상시키기 위해 주축과 회전자를 각각 고분자 기지 섬유강화 복합재료와 자성분말이 함침된 에폭시 수지를 이용하여 설계하였다. 설계된 복합재료 회전자의 자기 특성을 향상시키기 위해 내부에 강철 코어를 삽입하였으며, 강철 코어와 전도체 봉의 기하학적 형상의 변화가 전동기의 성능에 미치는 효과를 파악하기 위해 자기 해석을 수행하였다. 유한요소해석을 통해 복합재료 회전자의 최적의 기하학적 조건을 제안하였다. 또한 복합 재료 회전자 재료의 열특성을 파악하기 위해 TMA, DMA및 VSM을 이용한 기계적, 전자기적 물성측정을 수행하여 복합재료 회전자의 최적 설계에 적용하였다.

• 항공우주시스템공학회지
• /
• 제13권5호
• /
• pp.39-48
• /
• 2019

회전-고정자 혼합기 내의 난류 유동은 고속으로 회전하는 회전자와 고정자의 상호작용에 의해 발생되는 전단특성을 기반으로 한다. 본 연구에서는 유화연료 관련 회전-고정자 혼합기 시제품 모델에서 회전자와 고정자간의 상호작용에 의한 비정상상태 유동 특성 분석을 ANSYS FLUENT $k-{\varepsilon}$ (RKE) 난류 모델을 MRF 및 SMM에 적용하여 수행하였다. 회전자와 고정자의 경계에서 발생하는 유동 입자들의 거동과 전단 특성 그리고 설계 파라미터에 따른 속도분포와 난류와류소산 등의 경향을 전산유체역학 해석을 통해 예측 비교하여 모델의 효율성을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제10권3호
• /
• pp.286-293
• /
• 2004

This paper presents the result of a study on the starter control for a turbo generator. Because a starter in gear box type turbo-generator system is composed of gearbox and brush DC motor, it should be replaced with High Speed Generator(HSG)) in HSG type Turbo-generator. There-ore, it is necessary to design a new starting algorithm and starter. In gearbox type system, brush DC motor is rotated to the designed speed using low voltage-high current battery power. After brush DC motor speed is increased to several times by gearbox, gas turbine engine can be rotated to designed starting speed. If we implement a starter with High Speed Generator(HSG), it is necessary to drive high-speed generator to high-speed motor. High-speed generator with permanent magnet on rotor has a low leakage inductance fur driving high-speed rotation, and it is necessary high DC link voltage for inverter when High-speed generator is driven to high speed. This paper presents result of development of the boost converter for converting high voltage DC from low battery voltage and design of the inverter for controlling a high frequency current to be injected to motor winding. Also, we show performance of the designed starter by driving the turbo generator.