Browse > Article
http://dx.doi.org/10.5370/KIEE.2014.63.10.1371

Design and Drive Characteristics of Low Voltage 8/6 SRM for Fan Application  

Ahn, Jin-Woo (Dept. of Mechatronics Eng., Kyungsung University)
Publication Information
The Transactions of The Korean Institute of Electrical Engineers / v.63, no.10, 2014 , pp. 1371-1376 More about this Journal
Abstract
In this paper, 4-phase switched reluctance motor(SRM) with 8-stator and 6-rotor pole structure is proposed for a high speed fan with a low voltage. The air blower has unidirectional rotation characteristics and requires a low torque ripple and noise as well as high efficiency. To achieve the requirements, voltage and current according to loading condition of limited specification is considered. Design process is to select the bore diameter, pole arc, york of stator and rotor to get a high torque and efficiency. To verify the validity of the proposed structure, finite element method(FEM) is employed to get the performances. And the converter for the proposed SRM is employed a 1.5q power converter for cost effectiveness. Prototype SRM is manufactured and tested, and the test results show this design is within the specification and good for the air blower applications.
Keywords
Switched Reluctance Motor; 4-Phase 8/6 SRM; Low voltage; High speed; Unidirectional rotation; Blower;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 M. Tanujaya, Dong-Hee Lee, Jin-Woo Ahn, "Design a Novel Switched Reluctance Motor for Neighborhoods Electric Vehicle", ECCE-Asia, June 2011.
2 J.W. Ahn, H.K.M. Khoi, D.H. Lee, "Design and analysis of high speed 4/2 SRMs for an air-blower", 2010 IEEE International Symposium on, Industrial Electronics (ISIE), vol., no., pp.1242-1246, 4-7 July 2010.
3 Tanujaya, M, D.H. Lee, J.W. Ahn, "Characteristic analysis of a Novel 6/5 c-core type three-phase Switched Reluctance Motor", IEEE International Conference of Electrical Machines and System, pp. 1-6, Aug. 2011.
4 D.H. Lee, T.H. Pham and J.W. Ahn, "Design and operation characteristics of four-two pole high-speed SRM for torque ripple reduction," IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 3637-3643, Sep. 2013.   DOI   ScienceOn
5 H.K.M. Khoi, J.W. Ahn, D.H. Hee, "Current Control Scheme of High Speed SRM using Low Resolution Encoder", Jounal of power Electronics, Vol. 11, No.4, pp. 520-526, 2011.   과학기술학회마을   DOI   ScienceOn
6 D.H. Lee, J.W. Ahn, "Performance of High-Speed 4/2 Switched Reluctance Motor", Journal of Electrical Engineering & Technology, Vol.6, No. 5, pp. 640-646, 2011.   과학기술학회마을   DOI   ScienceOn
7 J.W. Ahn and B.C. Kim "Drive Characteristics of Single Phase SRM for Fan Application", Journal of The Korean Institute of Power Electronics, vol. 8, No.5, 2003, pp. 450-454   과학기술학회마을
8 J.W. Ahn, "Model and Simulation of the Switched Reluctance Motor Drive System", KIEE International Trans. on EMECS, vol. 2, No.8, 2002, pp. 201-206   과학기술학회마을
9 S.H. Lee, D.H. Lee, Y.J. An, J.W. Ahn, "Performance of SR Drive for Hydraulic Pump", Journal of Electrical Engineering & Technology, vol. 2, no.1, 2007, pp.55-60   과학기술학회마을   DOI   ScienceOn
10 T.H. Kim, S.H. Lee, J.W. Ahn "Design of High Speed SR drive systemfor Fuel Pump of Fuel Cell Electric Vehicle" 2012 IEEE Vehicle Power and Propulsion Conference, 2012, pp. 594-597
11 D.H. Lee, H.K.M. Khoi, J.W. Ahn, "Design and Analysis of High Speed 4/2 SRMs for an air-blower", IEEE International Symposium Industrial Electronics, pp.1242-1246, July 2010.
12 R. Krishnan : Switched Reluctance Motor Drives. CRC Press LLC, Boca Raton, Florida, 2001.
13 R. Krishnan, R. Arumugan, J.F. Lindsay, "Design Procedure for Switched Reluctance Motors", IEEE Trans. on Industry Applications, vol. 24, 1988, pp. 456-461   DOI   ScienceOn
14 D.H. Lee, J.W. Ahn, "A Simple Negative Torque Compensation Scheme for a High Speed Switched Reluctance Motor", Journal of Power Electronics, Vol. 12, No. 1, pp. 58-66, 2012.   과학기술학회마을   DOI   ScienceOn
15 J.W. Ahn, "Characteristics Analysis of Short Flux-path 4/3 SRM" Journal of International Conference on Electrical Machines and Systems Vol. 2, No.1, pp.40-44, 2013