• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.49-58
• /
• 2003

In this paper, the structural strengths of a rolling stock seat were numerically evaluated under several design load conditions based on the UIC requirements. The rolling stock seat was designed for the high speed train of a Chinese conventional line. To maximize its weight reduction and structural strength, some aluminium alloys like 6N01-T5 and ALDC8-T5 were applied to the base frame, side frame and armrest. The designed seat frame satisfied the strength requirements on inertia loads due to accelerations, and fatigue test conditions. However, it violated the requirements on the static test of UIC 566 OR. Some design modifications were suggested and numerically evaluated to satisfy the static test requirements.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.298-302
• /
• 2016

Currently, logistics are in small quantities and in diverse forms, and the amounts are continuously increasing. Railway logistics however are losing their market share every year mainly due to low operation speed and loading time, which means the trucks are covering the most of the freights. In order to solve these situations, this paper proposed the high speed freight train as working multi-modality with other modes to make effective transshipment. The high speed freight train has maximum operation speed of 300km/h and electric power to run centralized power supply. There are large dual door system, bogie system covering fluctuating load of 15[ton], automatic loading device, ULD(unit load device) bed and ULD locking system in this freight rolling stock. We calculated the performance of powering and braking capacity for this train and proposed how many vehicles are composed of train set. The results in this paper can help to make a decision to define the technical specification of High-speed freight train for the efficiency of rail freight service.

• 한국철도학회논문집
• /
• 제11권4호
• /
• pp.371-377
• /
• 2008

철도가 친환경 교통수단으로 각광을 받으면서 세계적으로 많은 고속철도와 도시간, 도시 철도가 건설되고 리모델링되고 있다. 이 추세에 맞추어 철도 RAMS는 2002년도에 국제규격인 IEC 62278에 포함되었다. 국내 철도시장의 RAMS 활동도 이 국제적 추세에 맞추어 활발해지고 있다. 그러나 IEC 62278은 RAMS 요구조건이 구매사양에 포함될 때 전체적인 가이드라인으로는 사용될 수 있지만 신뢰성목표가 어떻게 설정되어야 하는가와 같은 구체적인 방법을 포함하고 있지는 않다. 이것은 RAMS 요구조건은 특정한 철도 조건에 맞게 설정되어야만 하기 때문이다. 철도 RAMS 특성값의 의미를 완전히 이해하고, 이 특성값들을 특정한 철도시스템과 환경조건에 맞게 적용하는 것이 특히 정량적 요구조건에 대해서는 더욱 필수적이다. 이 연구에서는 철도차량의 정량적 RAMS 요구조건의 개발에 적용 가능한 RAMS 특성값들의 의미와 특성을 기술한다. 그리고 정량적 RAMS요구조건의 개발에 적합하게 IEC62278의 RAMS의 기본개념과 고장 개념을 수정하여 제안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.780-788
• /
• 2008

As a railway is receiving attention as an environment-friendly transportation mode, many high speed, inter-city and urban railway are constructed and remodeled in the world. With this trend, railway RAMS was included in the international standard IEC 62278 in 2002. RAMS activity in domestic market is also increased with this international trend. However, IEC 62278 does not describe the methodology of substantial contents like how reliability target is set although it can be used as an overall guideline when RAMS requirements are included in the purchase specification. That is because RAMS requirements should be set with the specific railway condition. It is required to fully understand the meaning of railway RAMS parameters and apply those correspond to the specific railway system and environment condition especially when a quantitative RAMS requirement is set. In this study, the meaning and characteristics of RAMS parameters applicable to the development of quantitative RAMS requirement of rolling stock is described. And the basic concept of RAMS and the definition of failure that IEC 62278 describes is modified and suggested in order to make more suitable to the development of quantitative RAMS requirement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.219-222
• /
• 2007

The Full-Off Fitting of Movable Bracket using conventional line have received a dynamic contact impact between contact wire and pantograph of electric rolling stock, so this impact cause a rapid vibration of foreword and back near the supporting point of movable bracket. The Full-Off Fitting on Movable Bracket in conventional line differs from that in high speed line. Now conventional line have required a speed up for new electric locomotive and electric car. In speed-up track and big impact place, the Full-Off Fitting and the dropper often get demage. We have done a study of buffering function to solve that problem in conventional line. We have find a need adopting buffer fitting. It is decrease a dynamic impact between contact wire and pantograph of electric rolling stock.

• 대한기계학회논문집A
• /
• 제37권11호
• /
• pp.1437-1443
• /
• 2013

현재 국내선로에서 운전규정에 따른 곡선반경별 속도제한을 실행하고 있으나 기존선 속도 향상과 관련하여 실제로 탈선 발생 없이 운행 가능한 곡선부 최대 통과속도에 대한 연구가 필요하다. 또한, 철도차량의 주행안전성에 영향을 미치는 요인으로서는 차량측면과 궤도측면으로 나눠질 수 있는데, 본 연구에서는 탈선 안전도 향상에 영향을 미치는 매개변수 중 레일 경좌 변화에 따른 주행안전성을 해석하고자 하였다. 탈선의 위험도가 높은 곡선부 통과하는 열차의 고속향상을 도모하기 위하여 실제 선로조건인 남성현${\leftrightarrow}$청도 상 하행 구간의 곡선부 구간별 통과시 레일 경좌와 주행속도 변화에 따른 주행안전성 해석을 수행하였다.

• 한국철도학회논문집
• /
• 제8권4호
• /
• pp.348-353
• /
• 2005

In designing the structures of railway rolling stocks, deterministic methods associated with the concept of a safety factor have been traditionally used. The deterministic approaches based on the mean values of applied loads and material properties have been used as safety verification for the design of rolling-stock car body structures. The uncertainties in the applied loading for the high speed train and the strength of new materials in the rolling stocks require the application of probabilistic approaches to ensure fatigue safety in the desired system. Pressure loadings acting on the car body when the train passes through tunnels show reflected pressure waves for high-speed trains and they may cause a fatigue failure in vehicle bodies. Use of new material technology as body structures also introduces uncertainties in the material strength. A probabilistic approach is more adaptable in designing reliable structures when the pressure waves from the tunnels pounds and new material technology is adopted. In this paper, it is proposed that a fatigue design and assessment method based on a reliability which deals with the loading variations on a railway vehicle due to the pressure reflected in tunnels and the strength variations of material. Equation for the fatigue reliability index has been formulated to calculate the reliability assessment of a vehicle body under fluctuating pressure loadings in a tunnel. Considered in this formulation are the pressure distribution characteristics, the fatigue strength distribution characteristics, and the concept of stress-transfer functions due to the pressure loading.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1804-1809
• /
• 2015

The study in railway system to apply a fuel cell system with high efficiency and mobility than other renewable energy is being actively conducted. It is needed a analysis on load characteristics and control method of rolling stock in order to apply to rolling stock. This paper presents study on control small-scale prototype power converter electric railway vehicle using fuel cell generation system. Experiment is conducted through real fuel cell generation system and reference speed applying the driving curve of the actual electric railway vehicle was applied. Also, output voltage of boost converter is controlled considering characteristic of fuel cell. And it was confirmed characteristic according to powering and regeneration of inverter.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.476-482
• /
• 2009

A signal equipment improvement project for the existing facility ATS to ATP is under construction in Kyung-Bu and Ho-Nam commercial line including 400 rolling stocks. But there was a concern for the interface between KTX OBCS and ATP from the beginning of the project. At present, this is the front burner event. This paper introduces interface checking and predicted failure point between KTX OBCS and ATP improvement system. Through this measure the optimal installation of the ATP will be possible. The study was made under maintenance efficiency including reliability because the KTX signal equipment must qualify the above condition.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.98-103
• /
• 2002

The prototype test train(HSR 350X) was developed and is now being tested in R＆D project for developing Korean High Speed Rolling Stock. International cooperative works with German, Japanese, Danish English and Swiss company were done for reviewing the results made by domestic companies and enhancing their design capability. The main results of cooperation are shown in this paper. In addition, some problems and comments issued during cooperation are also represented.