• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1347-1350
• /
• 2005

Recently, as the road capacity reaches a limit and environmental problems become serious, there exists a gradual increasing need for railway vehicles that are environment-friendly, punctual, reliable and safe. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. Using the developed installed measurement system, the performance characteristics of railway vehicle could be monitored precisely. After recording the input real time data of each signal from railway vehicle to the network line, we could acquire the needed information through post processing program. We could verify the running performances of railway vehicle using this system. As a result, many latent defects have been found and corrected in the prototype train. The measurement systems have contributed to dramatic reduction of the developing period.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1140-1142
• /
• 2000

This paper describes a down-scaled model for a high-speed railway train. The propulsion system of simulator consists of four line-side converters four induction motors driven by two inverters, an eddy current braking system, two dynamic braking systems. The control algorithm of traction and braking including anti-skid control can be developed using the simulator. Simulator design procedure. control algorithm and some experimental waveforms are presented in this paper.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.86-90
• /
• 2002

In this paper, traction system for urban transit maglev system is proposed. Using vector control strategy to control magnitude and frequency of output voltage transiently is general. But in case of traction system for railway vehicle, it is impossible that adapt vector control because there is one-pulse mode in a high speed region. So this paper proposes the control strategy using vector control in a low speed region and slip frequency control in a high speed region. And also proposes overmodulation method that makesto change in one-pulse mode softly. The performance of traction system will be verified by simulation results using ACSL.

• 한국철도학회논문집
• /
• 제2권2호
• /
• pp.39-45
• /
• 1999

This paper presents the current-fed inverter of a TGV-K traction system with thyristor switches using phase control and commutation techniques. The current-fed inverters have two modes of operation which consist of forced commutation and natural commutation. In forced commutation mode, at speed of less than 120km/h, commutation is forced by means of the commutation capacitors and the thyristors. Above 120km/h, the thyristors operate in natural commutation mode. according to the voltages between phases of the motors. In this paper. the power conversion theory of the TGV-K traction system and the control principle of the converter and current-fed inverter are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.194-199
• /
• 2003

The traction drive system for the urban transit Rubber-tire system is described in this paper. To control the magnitude and frequency of the output voltage of induction motor transiently, the vector control strategy is generally used. But in case of the traction drive system for the railway vehicle, it is difficult to use the vector control caused by the one-pulse mode in the high speed region. Therefore, this paper proposes the control strategy combined the vector control in the low speed region and the slip frequency control in the high speed region. And also, the overmodulation PWM method is discussed to make the change to the one-pulse mode softly. The performance of the Proposed traction drive system is verified by the MATLAB simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1298-1300
• /
• 2002

This paper suggested that the technical specification of tilting train EMU for speed up on existing lines. High speed strategy of existing lines are the modification of railway system which are made on cant, lengths of transition curves, the catenary system and train system. Tilting technology is more useful a strategy for speed increases on existing lines with low investment needed. We performed a feasibility study which is considered out real track conditions and designed propulsion and braking system of tilting EMU system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1978-1983
• /
• 2008

With the increase in population, the area of human activities has expanded, resulting in the dramatic increase in the need for transportation system. Various infrastructures necessary for efficient logistics, however, have not been supplied enough and the logistics efficiency in Korea is in a bad situation now. As a result of the situation, the demand for the railroad transportation system that can provide large volume transportation has increased dramatically. An electric railway system is composed of high-tech subsystems, among which main electric equipment such as motors and converter are critical components determining the performance of electric vehicle. Among the on-board equipments, traction equipment is important part that has influence on safety and performances of vehicles. We is studied for high-speed train of foreign countries. From this research, we knows that axle weight of HEMU-400x is reasonable within 13ton.

• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.173-178
• /
• 2010

전기철도는 전력공급시스템과 전기차로 구성되어 있다. 전기철도의 전기차는 대규모의 견인력을 얻을 수 있어 대량수송과 고속운전에 적합하다. 전기차는 모터블록과 견인전동기에 의해서 구동되며, 지령속도에 따라 모터블록에서 견인전동기에 전력을 공급하여 속도가 제어된다. 전기차의 속도제어는 모터블록과 견인전동기의 최소 에너지로 속도를 제어하는 것이 목표이다. 최근의 견인전동기는 직류 및 동기전동기에서 유도전동기를 사용하고 있다. 대부분의 유도전동기는 벡터제어기법을 사용하여 유도전동기의 속도를 제어한다. 본 논문에서는 유도전동기의 벡터제어기법을 이용하여 유도전동기의 속도를 제어하였다. Simulink를 이용하여 제어시스템을 모델링하고, PI 제어기와 Hysteresis 제어기를 이용하여 펄스를 제어하여 전동기의 속도를 제어하였다. 실시간 제어를 위해 IGBT 인버터를 사용하였고, 유도전동기 구동실험에 의해 시스템 성능을 입증하였다.

• 한국철도학회논문집
• /
• 제15권4호
• /
• pp.370-375
• /
• 2012

본 연구에서는 철도차량용 추진시스템에 매입형 영구자석 동기전동기(IPMSM)를 적용하기 위하여 110kW급 고출력밀도 IPMSM을 집중권/분포권 모델로 각각 설계하였다. 집중권 모델은 6극 9슬롯 구조이고, 분포권 모델은 6극 36슬롯 구조이다. 일반적으로 IPMSM의 영구자석에서의 와전류 손실은 슬롯 고조파에 의해 발생된다. IPMSM의 고속 회전 시 와전류 손실에 의한 영구자석의 열적 감자현상은 특히 집중권 IPMSM에서 주요 문제가 된다. 영구자석에서의 와전류 손실을 줄이는 설계는 고속 운전을 필요로 하는 철도차량 추진시스템용 IPMSM 설계에 있어서 중요하다. 그러므로 본 논문에서는 영구자석에서의 와전류 손실을 줄이기 위하여 영구자석을 분할하는 방법을 제안한다. 저자는 영구자석의 분할 개수를 변화시면서 IPMSM 집중권 모델의 영구자석에서 발생되는 와전류 손실의 변화 특성을 분석한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.433-438
• /
• 2003

The recent operating trains including the high speed train are mostly moving system on the rail and system use the mechanical propulsion force to drive the gear and wheel by the traction motor. Advanced countries are interested in Magnetic Levitation Vehicle and they have been studying about it continuously. Thus this paper is analyzed the feature of analysis the feature for Linear Induction Motor as the propulsion equipment of Magnetic Levitation Vehicle. And the Magnetic Levitation Vehicle is being developed for the transportation system of next generation using the Finite Element Method