• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.1
• /
• pp.83-91
• /
• 2003

High-speed QPSK demodulator has been in important design objective of any wireless communication systems, especially those offering broadband multimedia service. This paper describes all-digital QPSK demodulator for high-speed wireless communications, and its hardware structures are discussed. All-digital QPSK demodulator is mainly composed of symbol time circuit and carrier recovery circuit to estimate timing and phase-offsets. There are various schemes. Among them, we use Gardner algorithm and Decision-Directed carrier recovery algorithm which is most efficient scheme to warrant the fast acquisition and tacking to fabricate FPGA chip. The testing results of the implemented onto CPLD-EPF10K100GC 503-4 chip show demodulation speed is reached up to 2.6[Mbps]. If it is implemented a CPLD chip with speed grade 1, the demodulation speed can be faster by about 5 times. Actually in case of designing by ASIC, its speed my be faster than CPLD by 5 times. Therefore, it is possible to fabricate the all-digital QPSK demodulator chipset with speed of 50[Mbps].

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.600-607
• /
• 2011

Recently, high carbon steel has become essential not only for shipbuilding parts, but also mass production. Its surface has been treated by carburizing, nitriding and induction hardening, but these existing treatments cause considerable deformation and increase the expense of postprocessing after treatment; furthermore, these treatments cannot be easily applied to parts that requiring the hardening of only a certain section. This is because the treatment cannot heat the material homogeneously, nor can it heat all of it. Laser surface treatment was developed to overcome these disadvantages, and when the laser beam is irradiated on the surface and laser speed is appropriate, the laser focal position is rapidly heated and the thermal energy of surface penetrates the material after irradiation, finally imbuing it with a new mechanical characteristic by the process of self-quenching. This research estimates the material characteristic after efficient and functional surface treatment using HPDL, which is more efficient than the existing CW Nd:YAG laser heat source. To estimate, microstructural changes and hardness characteristics of two parts (the surface treatment part, and parental material) are observed with the change of laser beam speed and surface temperature.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.35-43
• /
• 2002

In the last decade, considerable efforts have been made to make a new class of solid state high power, high speed electronic device, namely, the Photo-Conductive Power Switch(PCPS), and to characterize the high-field performance of PCPS under high power, high voltage conditions. But the problem of surface flashover phenomena persist, preventing the realization of reliable and efficient high-speed, high voltage switching devices. It is essential to have a clear understanding on the physical processes behind the surface flashover problem to develop new technologies and device architectures so as to fabricate PCPS that are capable of high-field high-voltage. Also, it is imperative to identify new materials that could satisfy the requirements for high-field, high-power devices. Since surface flashover, surface breakdown phenomena is observed for all the devices that foiled at the applied field much lower than semiconductor bulk breakdown field, surface passivation is considered one of the important practical methods to improve the high field performance of the devices. Therefore, this paper was studied the main properties and mechanism of the semiconductor surface flashover before and after passivation under high electric-field.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.712-714
• /
• 2000

In the field of computer graphics, it approached the investigation of outstanding performance and high speed. Although most introduced Anti-Aliasing method were to meet these, it was not to improve speed. Because Anti-Aliasing method was focus on only qualify. Anti-Aliasing Effect is compensated from movement of object on the screen. Speed is important in the REAL-TIME application program like as 3D games. Cause Anti-Aliasing which needs great amount of time is not used in general. This Paper suggest the Efficient Anti-Aliasing method which apply Two-Point Anti-Aliasing Method that informs brightness data of the screen and use adjacent brightness data for real-time rendering.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.7
• /
• pp.909-915
• /
• 1999

In this paper, we propose an efficient VLSI architecture of Reed-Solomon(RS) decoder. To improve the speed. we develope an architecture featuring parallel and pipelined processing. To implement the parallel and pipelined processing architecture, we analyze the RS decoding algorithm and the honor's algorithm for parallel processing and we also modified the Euclid's algorithm to apply the efficient parallel structure in RS decoder. To show the proposed architecture, the performance of the proposed RS decoder is compared to Shao's and we obtain the 10 % efficiency in area and three times faster in speed when it's compared to Shao's time domain decoder. In addition, we implemented the proposed RS decoder with Altera FPGA Flex10K-50.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.37-40
• /
• 2000

Multi Protocol Label Switching (MPLS) is a high performance method for forwarding packets (frames) through a network. It enables routers at the edge of a network to apply simple labels to packets (frames). we use MPLS in the core network for internet. MPLS provide high speed switching and traffic engineering in MPLS domain but at the Label Edge Router(LER) there is frequently cell discarding via congestion and buffer management method. It is one of the most important reasons retransmission and congestion. In this paper we propose advanced LER scheme that provide less cell loss rate also efficient network infrastructure.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.303-310
• /
• 2000

In this study the basic direction of conceptual design of new HSR(High Speed Railway) slab track was determined in the viewpoint of running safety, economic efficiency and maintenance costs. Based on the research results, a detailed conceptual design of HRS slab track is suggested. For the systematic development of slab track, a comparative study is carried out, comparing merits and demerits of each slab type, and used in the design process of slab track. To compensate the demerits of high cost in slab track construction, a program for determination of efficient slab section is coded and applied.

• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.251-254
• /
• 2003

DMB is a next-generation multimedia broadcasting system that not only enables digital broadcasting services such as transmission of CD-duality audio, traffic information, and real-time stock information, but also allows reception of high-quality digital TV in high-speed driving conditions. In the DMB system, MPEG-2 TS(Transport Stream) multiplex method and MPEG-4 System SL(Sync Layer) have been selected as the delivery layer. In this paper, an efficient interface scheme between an MPEG-2 TS processing hardware and software-implemented MPEG-4 system within a DMB terminal device is proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.22-33
• /
• 2005

In this paper, an efficient signal interference control technique to improve the high convergence speed of LMS algorithms is introduced in the adaptive transversal filter of DS/SS. The convergence characteristics of the proposed algorithm, whose coefficients are multiply adapted in a symbol time period by recycling the received data, is analyzed to prove theoretically the improvement of high convergence speed. According as the step-size parameter ${\mu}$ is increased, the rate of convergence of the algorithm is controlled. Also, an increase in the stop-size parameter ${\mu}$ has the effect of reducing the variation in the experimentally computed learning curve. Increasing the eigenvalue spread has the effect of controlling which is downed the rate of convergence of the adaptive equalizer. Increasing the steady-state value of the average squared error, proposed algorithm also demonstrate the superiority of signal interference control to the filter algorithm increasing convergence speed by (B+1) times due to the data-recycling LMS technique.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.3-12
• /
• 2013

Wireless Sensor Network (WSN) is used in the railway field in terms of efficient management and maintenance. Sensor communication technology based on IEEE 802.15.4/ZigBee is used in low speed train. However, it is difficult to apply in the high speed train that exposed to severe wireless channel environments. In this paper, we propose the sensor communication algorithm for high speed train environment. we improve error rate and throughput using Equalizer, Multiple Input Multiple Output (MIMO), Flexible Spreading Factor (SF) and Modulation. Also, we have analyzed the performance of the IEEE 802.15.4/ZigBee based on the standard of physical layer of 2.4GHz band in each algorithms. Simulation results show that proposed algorithms can improve error rate and throughput of conventional system.