• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권8호
• /
• pp.598-604
• /
• 1999

This paper describes the research to minimize the film stress and maximize the aspect ratio of photoresist structure, especially about SU-8 for electroplating mold. UV LIGA process using SU-8 allows fabricating high aspect ratio polymer structures. However, it is hard to get fine patterns in the high aspect ratio structures because of high internal stress and difficulty of removing SU-8. The purpose of this paper is to setup the process condition for the obtainment of both low film stress and high aspect ratio and to find design rules that make the pattern be less dependent on stress problem. Firstly, the process of heat treatment and exposure of SU-8 are proposed. These two conditions control the amount of cross-linkage in polymer structure, which is the most important parameter of both pattern generation and remaining stress. Heat treatment is dealed with soft bake and post-exposure-bake. Temperature and time duration of each step are varied with heat treatment condition. Some test patterns are fabricated to evaluate the proposed process. Nickel electroplating is performed with the mold fabricated through the proposed process to confirm the SU-8 as a good electroplating mold.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.112-112
• /
• 2012

Graphene has been considered as one of the potential post Si-materials due to its high mobility. [1] However, since graphene is semi-conductor with zero band gap, it is difficult to achieve high Ion/Ioff ratio, one of the most important requirements for commercial devices. There have been many attempts to open its band gap for high Ion/Ioff ratio, but most of them end up lowering the mobility. [2-5] Thus, we proposed and demonstrated a new device structure for graphene transistor based on one of the unique properties of graphene for high Ion/Ioff: using this approach, we were able to achieve the ratio over $10^5$. [6] Our device has several major advantages over previously proposed graphene based electronic devices. Since our device does not alter the given properties of graphene, such as opening the band gap, it has no fundamental issues on mobility degradations. In addition, our device is fully compatible with current Si technology and we were able to fabricate the devices with 6 inch wafer scale with CVD (Chemical Vapor Deposition) grown graphene. In this presentation, we will discuss about the details of our graphene device including the device structure and the detailed understanding of working mechanism. We will present device characteristics including I-V curves with $10^5$ on/off ratio. We will also present the performance of an inverter based on our devices. Finally, we will discuss the current issues and their potential solutions.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.773-778
• /
• 2006

High-aspect-ratio nano-hair or nano-pillar arrays have great potential in a variety of applications. In this study, we present a simple and cost-effective replication method of high-aspect-ratio polymer nano-hair arrays. Highly ordered nano-porous AAO (anodic aluminum oxide) template was utilized as a reusable nano-mold insert. The AAO nano-mold insert fabricated by the two-step anodization process in this study had close- packed straight nano-pores, which enabled us to replicate densely arranged nano-hairs. The diameter, depth and pore spacing of the nano-pores in the fabricated AAO nano-mold insert were about 200nm, $1{\mu}m$ and 450nm, respectively. For the replication of polymer nano-hair arrays, a UV nano embossing process was applied as a mass production method. The UV nano embossing machine was developed by our group for the purpose of replicating nano-structures by means of non-transparent nano-mold inserts. Densely arranged high-aspect-ratio nano-hair arrays have been successfully manufactured by means of the UV nano embossing process with the AAO nano-mold insert under the optimum processing condition.

• 한국의상디자인학회지
• /
• 제11권3호
• /
• pp.59-72
• /
• 2009

The purpose of this study was to establish objective data for marketing of industries and product development design by researching popular singer fashion of Korea, investigating the preference for popular singer design in street fashion among adolescents on the basis of the research, and drawing an conclusion. To analyze street fashion, total 190 young men and women in their 20s, including teenagers, were surveyed mainly in downtowns around Daehakro, Gangnam and Hongik University. First, in relation to the upper garment, men were found to wear T-shirts and hood T-shirts the most, while women were found to wear T-shirts and one-piece dress the most. Second, in relation to the lower garment, the ratio of those who wore skinny clothes was high both among men and women. Third, in relation to the outer apparel, the ratio of men who wore casual jacket and hood zip-up was high, while the ratio of women who wore tailored jacket and leather jacket was high. Fourth, in relation to shoes, the ratio of men who wore sports shoes was high, while the ratio of women who wore heeled-shoe was high. Fifth, it was found that plane pattern was preferred the most. As it was stated above, the findings of this study on the effect of entertainers' fashion on adolescents through street fashion indicated that the number of adolescents who imitate the fashion of entertainers increased.

• 한국학교ㆍ지역보건교육학회지
• /
• 제16권2호
• /
• pp.17-31
• /
• 2015

Objectives: This study aimed to analyze the relationship between metabolic syndrome and cataract in a middle-aged men over the age of 40's by using the data from the 5th Korean National Health and Nutrition Examination Survey(2010~2012). Methods: The subjects for the analysis were comprised of 5,808 patients who were at least 40 years or more with metabolic syndrome and cataract. The comparison between the metabolic syndrome and ophthalmic diseases according to the health demographic characteristics, health behavior and health conditions was analyzed with ${\chi}^2-test$. The complex samples logistic regression analysis was used to calculate the odds ratio of cataract according to the health demographic characteristics, health behavior and health conditions and the combination of the comprising factors of the metabolic syndrome. Results: After controlling the confounding factors, the odds ratio of cataract in the metabolic syndrome group was OR 1.30, which was significantly high (p<0.01). Furthermore, the odds ratio of cataract was significantly high in the case of males, as the age increased, educational level decreased, with exercising habits of less than 3 days a week, sun exposure of at least 5 hours, with hypertension and diabetes (p<0.01). The results of analyzing the odds ratio for the occurrence of cataract with the components of metabolic syndrome were OR 1.36 (concurrent high fasting blood glucose, high triglycerides, low HDL cholesterol), OR 1.63 (concurrent high fasting blood glucose, high triglycerides, high waist circumference) and OR 1.33 (high triglycerides, low HDL cholesterol, high waist circumference), which showed significantly high odds ratio for cataract occurrence (p<0.05). Conclusions: We come to know that the relation between metabolic syndrome and components are associate with cataract. Therefore the thorough management of metabolic syndrome and components is needed to prevent cataract.

• KCI Concrete Journal
• /
• 제14권3호
• /
• pp.121-129
• /
• 2002

This study investigates experimentally into the design factors and quality variations having an effect on the properties of the combined high flowing concrete to be poured in the slurry wall of Inchon LNG in-ground receiving terminal. Especially, high belite cement and lime stone powder as cementitious materials and viscosity agent in order to improve self-compaction and hydration heat are used in this study. Water-cement ratio(W/C), fine aggregate volume ratio(Sr) and coarse aggregate volume ratio(Gv) as design factors of the combined high flowing concrete are applied to determine the optimum mix design proportion. Also quality variations for sensitivity test are selected items as followings. (1)Surface moisture(5cases) and (2)Fineness modulus of fine aggregate(5cases), (3)Concrete temperature(3cases), (4)Specific surface(3cases) and particle size of lime stone powder. As experimental results, water-cement ratio, fine and coarse aggregate volume ratio are shown as the optimum range 51%, 43% and 53% separately considering site condition of slurry wall. Also quality factors by sensitivity test should be controlled in the following ranges. (1) Surface moisture :to.67% and (2)Fineness modulus 2.6$\pm$0.2 of fine aggregate, (3)Concrete temperature l0-20t, (4) Specific surface 6,000$\textrm{cm}^2$/g and particle size 9.7$\pm$1.0${\mu}{\textrm}{m}$ of lime stone powder. Based on the results of this study, the optimum mix design proportion of the combined high flowing concrete are selected and poured successfully in the slurry wall of LNG in-ground tank.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.463-466
• /
• 1999

Ductility is an important consideration in the design of reinforced high-strength concrete. Therefore, this research investigate the ductile behavior of rectangular high-strength concrete columns like as bridge piers with confinement steel. The effect on the ductility of axial load, lateral reinforcement ratio, longitudinal reinforcement ratio, shear ratio, and compressive strength of concrete were investigated analytically using layered section analysis. As the results, it was proposed the proper relationship between ductility and variables and formulated into equations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.85-88
• /
• 1995

Recently, the micro mold maching techining technology is developed by means of the mechanical and high energy beam process. It is possible to make the micro structure mold with high aspect ratio by the LIGA technology. This mode is used for mass production of plastic parts by the micro injection molding method. In this study, we intend to research on the basic technology of micro injection molding. As the result, we developed the injection molding technology for small column plastic parts which diameter is 500 .mu. m and 200 .mu. m respectively with wbout aspect ratio 20.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.35-38
• /
• 2000

Since the telemanipulator consisting of high reduction ratio gear joints has a slow dynamics comparing with the master manipulator, its control signal is likely to be saturated resulting in poor tracking performance and deteriorated stability. This paper proposes a bilateral control scheme of a telemanipulator having high reduction ratio, which can compensate the control input saturation. The experimental results show that the proposed control scheme has excellent performances.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.20-24
• /
• 1976

These are many kinds of self-hardening methods for sand mold using sodium silicate. When sodium silicate solution is mixed with calcium-orthosilicate powder hardening reaction occurs, which is based for self-hardening method at high temperature. The high temperature strength and resicual strength of mold are related to the mole ratio of sodium silicate and the contents of calcium-orthosilicate powder. The results obtained in this study were as follows: 1) The high temperature strength of mold was maximum at about $600^{\circ}C$, and at higher temperature showed lower value on the contrary. 2) The high temperature strength of mold was increased by increasing the amount of sodium silicate having lower mole ratio and high concentration. 3) The residual strength of mold was reduced by increasing the mole ratio of sodium silicate and increasing the concentration of calcium-orthosilicate.