• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.556-563
• /
• 2007

We carried out a laboratory scale experiment about the characteristics of chemically active species produced in hybrid gas-liquid discharges. The electrode configuration which had high voltage electrode in the gas phase and ground electrode in the liquid was utilized while high voltage electrode has been typically positioned in the liquid in other studies. Our electrode was configured in such a way as to increase the energy efficiency of chemical reactions by creating a higher electrical field strength and a narrower pulse width than the typical electrode configuration. The highest ozone concentration was obtained at 45 kV which was the medium value in operating voltages. The decrease of solution conductivity increased the resistance of liquid phase and the electric field strength through the gas phase, so ozone gene-ration rate was enhanced. The increase of voltage promoted the production rate of hydrogen peroxide by increasing the electric field strength. In a lower voltage, the increase of solution conductivity increased the degradation rate of $H_2O_2$, so the $H_2O_2$ generation rate decreased. On the other hand, the effects of UV radiation, shock waves etc. increased the $H_2O_2$ generation rate as the solution conductivity increased. A higher rate of $H_2O_2$ generation can be achieved by mixing argon to oxygen which generates a stronger and more stable discharges.

• CRM연구
• /
• v.3 no.2
• /
• pp.43-68
• /
• 2010

One of the recent research trends that universities are increasingly adopting the concept of 'customer' and the customer-oriented strategy has urged us to research enterprise-wide CRM strategy adaptable to university administration. As the first step of CRM strategy for university management, we try to validate the difference of CRM strategic factors among university types. Drawing upon both CRM process and customer equity drivers, which have been recognized as core frameworks for CRM strategy, we developed those survey instruments adoptable into university industry, and validated statistically-significant difference among 12 types of university group constructed by the levels of university evaluation and the location of the universities. We collected 261 responses from 177 universities from all over the country and analyzed the data to see the levels of CRM processes consisting of customer acquisition, retention, and expansion, and customer equity drivers consisting of value equity, brand equity, and relationship equity by using multivariate ANOVA(MANOVA). The result confirms the explicit differences of the levels of CRM processes and customer equity drivers between the groups by university evaluation levels(high/middle/low). However, the analysis failed to show the significant differences of those between the group by university locations(the capital/the suburbs/the six megalopolises/other countries). More specifically, the level of activities for customer acquisition and retention of the universities in the higher-graded group are significantly different from those in the lower-graded group from the perspective of CRM process. In terms of customer equity drivers, the levels of both brand equity and relationship equity of the higher-graded group are significantly higher than those of both middle and lower-graded group. In addition, we found that the value equity between the higher and lower-graded groups, and the brand equity between the middle and lower-graded groups are different each other. This study provides an important meaning in that we tried to consider CRM strategy which has been mainly addressed in profit-making industries in terms of non-profit organization context. Our endeavors to develop and validate empirical measurements adoptable to university context could be an academic contribution. In terms of practical meaning, the processes and results of this study might be a guideline to many universities to build their own CRM strategies. According to the research results, those insights could be expressed in several messages. First, we propose to universities that they should plan their own differentiated CRM strategies according to their positions in terms of university evaluation. For example, although it is acceptable that a university in lower-level group might follow the CRM process strategy of the middle-level group universities, it is not a good idea to imitate the customer acquisition and retention activities of the higher-level group universities. Moreover, since this study reported that the level of universities' brand equity is just correlated with the level of university evaluation, it might be pointless for the middle or lower-leveled universities if they just copy their brand equity strategies from those of higher-leveled ones even though such activities are seemingly attractive. Meanwhile, the difference of CRM strategy by university position might provide universities with the direction where they should go for their CRM strategies. For instance, our study implies that the lower-positioned universities should improve all of the customer equity drivers with concerted efforts because their value, brand, and relationship equities are inferior compared with the higher and middle-positioned universities' ones. This also means that they should focus on customer acquisition and expansion initiatives rather than those for customer retention because all of the customer equity drivers could be influenced by the two kinds of CRM processes (KIm and Lee, 2010). Surely specific and detailed action plans for enhancing customer equity drivers should be developed after grasping their customer migration patterns illustrated by the rates of acquisition, retention, upgrade, downgrade, and defection for each customer segment.

• Progress in Medical Physics
• /
• v.14 no.4
• /
• pp.268-278
• /
• 2003

Purpose：The aim of this study was to evaluate the striatal binding ratio, the anterior/posterior ratio and reproducibility using a template based registration method using the standard MR template as a replacement for each patients MR image. Materials and Methods：This study analyzed the 123I IPT SPECT images of 30 patients with IPD, who were subdivided into 17 patients (56.6$\pm$10.8 yr, M/F : 8/9.) with mild IPD, and 13 patients (56.4$\pm$11.1 yr, M/F : 8/5) with severe IPD. In addition, 11 normal controls (57.8$\pm$14.4 yr, M/F : 4/7) were also analyzed. The ROIs were positioned manually in the same slice showing the highest striatal activity using the traditional manual method, whereas those were positioned automatically in a mid striatal slice of the SPECT image coregistered to the standard T1 weighted MR template. Results : The specific binding ratio (SBR) obtained using the template based registration method strongly correlated with those using the manual method in all groups : normal controls (r=0.85, P<0.001), mild IPD (r=0.84, P<0.001) and severe IPD (r=0.7, P=0.01). The SBRs obtained using both methods were significantly different among the three groups (P=0.05) and the SBRs obtained by the template based registration method were higher than those by the manual method (P=0.05) in all three groups. The APRs obtained by the template based registration correlated with those using manual method in only mild IPD (r=0.72, P=0.0). The APRs obtained by the template based registration method were significantly different from the normal controls and those with mild or severe IPD (P<0.05), whereas those obtained using the manual method were not significantly different among the three groups (P＞0.1). The reproducibility (rmsCV) of the template based registration method was 7.2% (normal controls：5.2%, mild IPD：4.2%, severe IPD：10.8%), whereas the reproducibility of the manual method was 31% (normal controls：19.7%, mild IPD：21.7%, severe IPD：46.2%). Conclusion：These results show that the use of $^{123}$ I-IPT SPECT for assessing IPD is affected by the methods used to position the striatal ROI. The template based registration method using the standard MR template can be useful in diagnosing IPD and assessing the disease severity with a high reproducibility. Therefore, the template based registration method appears to be a good replacement for the manual method.

• Journal of Distribution Science
• /
• v.7 no.4
• /
• pp.15-26
• /
• 2009

The internet has dramatically changed a way of business management and competition in the business environment. Especially, it stimulated not only to evolve online floral distribution service but also to change a phase of competition among floral retail stores in industry. And that also led to keen competition among IT service providers as well. This study is to examine how floral retail stores have been evolved and competed with the radical situation of the floral distribution industry through IT service in the aspect of business and information technology. In addition, the Typhoon Positioning Strategy(TPS), a strategy for the IT service positioning, is introduced from IT service provider's perspective. For IT service providers to create high business value and continuous service providing, IT service should be positioned on the customers' "core business" and developed to the level of "solution." The Typhoon Positioning Strategy(TPS) is a strategy for the IT service positioning, indicating that IT service should be positioned according to a Business Process-Service model with the consideration of business development direction, IT service trend, and user's IT capability. That is, IT service providers should find out customers' "core business" area first to provide a right IT service to the company, and the IT service provided should meet to the level of business solution. The capability of the IT solution users is also an important factor to be considered for the advanced IT service. There are four principles of the Typhoon Positioning Strategy(TPS). Principle 1) IT service provided should be an IT solution Map suitable for customer business processes. Principle 2) IT service provided should be able to support customer core business. Principle 3) IT service provided should be a business solution. Principle. 4) IT service provided should be applied differently according to the level of customer's IT capability.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.5
• /
• pp.221-234
• /
• 2014

Recently, the Chinese beef consumption market has faced a sudden surge. With China's beef imports reaching $1.33 billion in 2013, the global market closely monitors China's rising consumption of beef. Because there have been no exports of Korean beef (Hanwoo) to China previously, the negative effects of opening of beef market between South Korea and China are speculated as the South Korean government advances FTA negotiations further with China. In order to prepare for the opening of beef market between the two nations and to understand Hanwoo's export competitiveness, our research team conducted a market research on beef price and quality in Beijing and Shanghai. Based on our research, we deduced the price of Hanwoo and analyzed the price competitiveness of Hanwoo in the emerging Chinese beef market. Based on the market research, the price competitiveness of Hanwoo's topside/inside, rib and loin are well-positioned compared to Chinese and imported high-end beef group in Beijing and Shanghai market. Specifically, the price competitiveness of Hanwoo's topside/inside and loin are dominant in Beijing while that of rib and loin are dominant in Shanghai.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1446-1455
• /
• 2016

The recent increase of fresh farm products, hazardous cargos, and high-priced goods in marine transportation has caused an increased demand of cargo owners and shipping companies with regard to the monitoring of the location and state of cargo. To meet this increase, numerous technologies are being studied for the monitoring of the cargo state. Cargo containers on a ship are loaded on a ship's deck and in a ship's hold, which is located under the deck. However, Since the developed technologies mostly transfer the container status information that collected by mobile communication, it costs a lot to install communication infrastructure on ship. And the ship's hold is completely sealed with a cover, and communication with the reader positioned at the ship's bridge is difficult. Therefore, most existing studies on container monitoring on ships have focused on the monitoring of containers loaded on a ship's deck. Accordingly, this study suggested system configuration for the monitoring of containers in a ship's hold using IP-RFID technology. The suggested system configuration was tested on an actual ship under navigation, and the test results are given in this study. The test results verified that the monitoring of containers in a ship's hold using IP-RFID technology is effective.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.445-456
• /
• 1997

This study was designed to examine the dental asymmetry in person with facial asymmetry and to examine the relationship between the degree of mandibular deviation and asymmetry of maxillary dental arch. The sample!, were divided to asymmetry group and normal group. The asymmetry group consisted of 21 subjects(6 males and 15 females) and their mean age was 23.5 years. The normal group consisted of 20 subjects(10 males and 10 females) and their mean age was 18.6 years. Anteroposterior, transverse position of all maxillary teeth except 3rd molars, vortical position of maxillary 1st molars, and angulation of central incisors were measured. The anterioposterior and transverse positions of teeth were measured on the maxillary dental casts, the vertical position of maxillary 1st molars and angulation of maxillary incisors were measured on posteroanterior cephalometric radiographs. The data were analyzed to examine whether significant asymmetries existed in each of the asymmetry and normal groups. The results of this study were as follows : 1. In the asymmetry group, the correlation between the degree of mandibular deviation and that of 3-dimensional dental asymmetry was not so high. 2. In the asymmetry group, the teeth in deviated side were more laterally positioned than that of undeviated side. There were differences in the anteroposterior position of maxillary 1st and 2nd molars and the angulation of maxillary central incisors. 3. In the asymmetry group, the transverse asymmetry was larger in the posterior teeth rather than in the anterior teeth and larger than the anteroposterior asymmetry.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.309-316
• /
• 1995

RF (radio-frequency) probes of Nuclear Magnetic Resonance are one of the important factors and should be designed and built properly depending upon the geometry of the samples and the information. In general there are two kinds of rf probes : one encircles the sample while the other is placed on the surface of the sample. However, in case that the samples on human internal organs have a tube shape, the two kinds of rf probes, as specified above, are usually unsuitable for the internal imaging due to the degradation of signal-to-noise ratios (SNR's). In this case a probe should be positioned as close to the area as possible by putting the probe in the tubelike sample to improve filling factor In the present study inside-out probes have been constructed in the three different shapes such as an anti-solenoidal, a saddle and a dual surface types. RF-field distributions have also been calculated depending upon the geometrical changes of anti-solenoid probes. Moreover, the performance of the inside-out probes has been checked by measuring SNR's of the images acquired. The inside-out probes constructed in this study produced better SWR's and rf-field uniformity in the area close to the probes in comparing with any other commercial probes. There is a high feasibility that the constructed probes in the present study are applicable to the diagnosis of human bodies.

• Journal of Korea Game Society
• /
• v.10 no.2
• /
• pp.49-56
• /
• 2010

In this paper, we propose a control method of virtual hand by the recognition of a user's hand in the virtual reality game environment. We display virtual hand on the game screen after getting the information of the user's hand movement and the direction thru input images by camera. We can utilize the movement of a user's hand as an input interface for virtual hand to select and move the object. As a hand recognition method based on the vision technology, the proposed method transforms input image from RGB color space to HSV color space, then segments the hand area using double threshold of H, S value and connected component analysis. Next, The center of gravity of the hand area can be calculated by 0 and 1 moment implementation of the segmented area. Since the center of gravity is positioned onto the center of the hand, the further apart pixels from the center of the gravity among the pixels in the segmented image can be recognized as fingertips. Finally, the axis of the hand is obtained as the vector of the center of gravity and the fingertips. In order to increase recognition stability and performance the method using a history buffer and a bounding box is also shown. The experiments on various input images show that our hand recognition method provides high level of accuracy and relatively fast stable results.