• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.42-48
• /
• 2002

In broadband wireless networks, the effective meeting of the QoS guarantees may strongly depend on the Contention Resolution Algorithm used in the uplink contention period. The time it takes a station to transmit a successful request to the base station, or request delay, must be kept low even during periods of high contention. If a request suffers many collisions, it cannot rely on the preemptive scheduler to receive low access delays. However, the conventional collision resolution algorithm has a problem that all collided stations are treated equally regardless of their delay from previous contention periods. Some requests may have very long request delay caused by continuous collisions. In this paper, we propose an adaptive collision resolution algorithm for fast random access in broadband wireless networks. The design goal is to provide quick access to the request with a high number of collisions. To do this, the proposed algorithm separates the whole contention region into multiple sub regions and permits access through each sub region only to the requests with equal number of collisions. The sub region is adaptively created according to the feedback information of previous random access. By simulation, the proposed algorithm can improve the performance in terms of throughput, random delay and complementary distribution of random delay by its ability to isolate higher priorities from lower ones. We can notice the algorithm provides efficiency and random access delay in random access environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.37-47
• /
• 2011

Real picture like high quality computer graphic is widely used in various fields and shader processor, a key part of a graphic processor, has been advanced to programmable unified shader. However, The existing graphic processors have been optimized to commercial algorithms, so development of an algorithm which is not based on it requires an independent shader processor. In this paper, we have designed and implemented a control unit to support high quality 3 dimensional computer graphic image on programmable integrated shader processor. We have done evaluation through functional level simulation of designed control unit. Hardware resource usage rate are measured by implementing directly on FPGA Virtex-4 and execution speed are verified by applying ASIC library. the result of an evaluation shows that the control unit has the commands more about 1.5 times compared to the other shader processors that is a behavior similar to the control unit and with a number of processing units used in a shader processor, compared with the other processors, overall performance of the control unit is improved about 3.1 GFLOPS.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.2 s.54
• /
• pp.57-68
• /
• 2007

The mega frame system is becoming popular for the design and construction of skyscrapers because this system exhibits structural efficiency by allowing high rigidity of the structure while minimizing the amount of structural materials to be used. Since the mega frame system is usually adopted for super high-rise buildings, the comfort of occupants may be main concerns in the practical application of this system. For the enhancement of the serviceability of mega frame structures, a semi-active tuned mass damper (STMD) is developed in this study. To this end, a Magnetorheological (MR) damper is employed replacing passive damper as a semi-active damper to improve the control effect of a conventional TMD. Since a conventional finite element model of mega frame structures has significant numbers of DOFs, numerical simulation for investigation of control performances of a STMD is impossible by using the full-order model. Therefore, a reduced-order system using minimal DOFs, which can accurately represent the dynamic behavior of a mega frame structure, is proposed in this study through the matrix condensation technique To improve the efficiency of the matrix condensation technique, multi-level matrix condensation technique is proposed using the structural characteristics of mega frame structures. The efficiency and accuracy of the reduced-order control proposed in this study and the control performance of a STMD were verified using example structures.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.2
• /
• pp.105-115
• /
• 2010

Recently, High-rise building are irregular-shaped to be city landmarks and function as vertical cities to enable the efficient use of land. 3T (Twisted, Tilted & Tapered) designs are being suggested for irregular buildings and studies to develop new structural system have been actively made to satisfy slender shape ratio. In diagrid system, not only gravity load but also lateral load is delivered based on the triangular shape of diagrid, so most of columns are eliminated. Because shearing force is delivered by the axial behavior (tensile/compressive) of diagrid to minimize shearing deformation, the system is more applicable to irregular buildings than existing system where shearing force is delivered by the columns. In this study, the process of selecting connection details and the structural safety of the selected details are verified using the finite element analysis with focus given to the construction overview of the Cyclone Tower. However, the relersed methods of stress concentration are suggested and the performance of stress concentration relieves that it's suggested for the appropriate cap plate thickness and extended length.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.677-685
• /
• 2015

In a will to subdue the brittleness as well as the low tensile and flexural strengths of ordinary concrete, researches are being actively watched worldwide on steel fiber-reinforced Ultra High Performance Concrete (UHPC) obtained by admixing steel fibers in ultra high strength concrete. For the purpose of maximizing advantage of UHPC, this study removes the upper flange of the steel girder to apply an inverted T-shape girder for the formation of the composite beam. This paper intends to evaluate the behavior of the shear connectors and the flexural characteristics of the composite beam made of the inverted T-shape girder and UHPC slab using 16 specimens considering the compressive strength of concrete, the mixing ratio of steel fiber, the spacing of shear connectors and the thickness of the slab as variables. In view of the test results, it seemed that the appropriate stud spacing should range between 100 mm and 2 or 4 times the thickness of the slab. Moreover, the relative displacement observed in the specimens showed that ductile behavior was secured to a certain extent with reference to the criteria for ductile behavior suggested in Eurocode-4. The specimens with large stud spacing exhibited larger values than given by the design formula and revealed that the shear connectors developed larger ultimate strength than predicted owing to the action of UHPC and steel after non-composite behavior. Besides, the specimens with narrow stud spacing failed suddenly through compression at the upper chord of UHPC before reaching the full capacity of the shear connectors.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.1
• /
• pp.13-20
• /
• 2005

In this paper, I recognized Korean isolated words using CVEM which is suggested by M. Bilginer et al. CVEM is an algorithm which is easy to extract the common properties from training voice signals and also doesn't need complex calculation. In addition CVEM shows high accuracy in recognition results. But, CVEM has couple of problems which are impossible to use for many training voices and no discriminant information among extracted common vectors. To get the optimal common vectors from certain voice classes, various voices should be used for training. But CVEM is impossible to get continuous high accuracy in recognition because CVEM has a limitation to use many training voices and the absence of discriminant information among common vectors can be the source of critical errors. To solve above problems and improve recognition rate, k-clustering subspace method and DCVEM suggested. And did various experiments using voice signal database made by ETRI to prove the validity of suggested methods. The result of experiments shows improvements in performance. And with proposed methods, all the CVEM problems can be solved with out calculation problem.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.8
• /
• pp.1108-1117
• /
• 2003

In Guadeloupe small ruminants (SR) are reared for meat production under pasture conditions. Intensive rotational grazing systems (irrigated, fertilised and high stocked) allow reasonable levels of production but generate high post-grazing residues. Experiments were designed to control them. A system in which residuals were mown (RM) was tested in comparison to the control system (Residuals Remained, RR). The same design was carried out for two years with Creole goat (G) and Martinik sheep (S). An accelerated reproductive rate (3 parturitions over 2 years) was carried out. Systems were compared at three parturition seasons per year(dry, intermediate and rainy seasons). Each group was composed of 20 goats ($36.0{\pm}2.5kg$) or 20 ewes ($46.8{\pm}2.4kg$). The female body traits did not vary according to pasture management and seasons. The stocking rate averaged 1,400 kg LW/ha. The mean fertility rate for does varied significantly (p<0.05) within the kidding season, from $80.4{\pm}0.5%$ to $93.7{\pm}2.9%$ while the mean litter size was $2.30{\pm}0.07$ total kids born. No effect of pasture system was observed. Corresponding values for ewes were $83.2{\pm}12.8%$ vs. $75.6{\pm}12.5%$ (p<0.05) and $2.43{\pm}0.24$ vs. $2.03{\pm}0.29$ (p<0.01) total lambs born for SRM and SRR ewes, respectively. A seasonal effect was observed upon ewe performances. The preweaning mortality of kids and lambs averaged 16.3% and 14.4%, respectively. It was 7 and 9 percentage points more (p<0.01) for RR than for RM kids and lambs, respectively. For both species, weaning took place at an average age of $81.4{\pm}3.6days$. In Creole kids, live weight at birth and at weaning were $1.9{\pm}0.2kg$ and $8.9{\pm}0.8kg$, respectively. In the Martinik sheep, the traits averaged $2.9{\pm}0.2kg$ and $18.9{\pm}0.9kg$. For both traits in both species, significant (p<0.05) group${\times}$season interactions were recorded. The consequences of elimination of post-grazing residues varied according to the SR species, the environmental conditions and the animal physiological status. The forage characteristics were not limiting factors since forage availability in the RM systems (2,300 and 2,600 kg DM/ha, respectively) and chemical composition were at satisfactory levels (CP content averaged 12 and 10%). It is recommended to develop new grazing system which would allow the use of post-grazing residues instead of mowing the refusals.

• Journal of Korea Multimedia Society
• /
• v.1 no.1
• /
• pp.98-108
• /
• 1998

In the multimedia tele-medical system the medical informations are stored and managed in multimedia database. Also, multimedia DBMS is essential in order to manage large scale medical informations, and the remote access function is necessary for the distributed processing at all around the hospital. For the multimedia tele-medical information that is composed of image/picture, data, video, and audio, a high-speed telecommunication network is necessary that can provide separated connections for each medical information type with different QoS. The commercial DBMSs are based on the TCP/IP socket API(Application Programming Interface) that does not provide multiple QoS. Also, each commercial DBMS has its own API that is incompatible with other DBMS. In this paper, we propose a multimedia DBMS agent for the remote access of the multimedia database in the tele-medical system. The proposed multimedia DBMS agent is based on the ATM API that can provide high-speed data transfer capability and multiple QoS connections. Also, the proposed multimedia DBMS agent is independent of the commercial DBMS. We explain the functional architecture of the multimedia DBMS agent, implementation technology on the ATM network environment, and the result of performance analysis.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.691-697
• /
• 2009

Hardware dedicated off-the-shelf maritime differential GPS RSIM lacks the open architecture to meet all the minimum maritime user requirements and to include future GNSS improvements after recapitalization. This paper carries out a study to replace existing hardware dedicated differential GPS RSIM with software differential GPS RSIM in order to make up the weak point of hardware dedicated off-the-shelf maritime differential GPS RSIM. In this paper, the architecture of software RSIM is proposed for maritime DGPS recapitalization. And the feasibility analysis of the proposed software differential GPS RSIM is performed as the first phase to realize the proposed architecture. For the feasibility analysis, the prototype RF module and DSP module are implemented with properties as wide RF bandwidth, high sampling frequency, and high speed transmission interface. This paper shows that the proposed architecture has the possibility of real time operation of software RSIM functionality onto the PC-based platform through the analysis of computation time. Finally, this paper verifies that the L1/L2 dual frequency software differential RSIM designed according to the proposed method satisfies the performance specifications set out in RTCM paper 221-2006-SC104-STD.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.25-37
• /
• 2000

As computer systems of high capacity and high performance recently emerged, various researches about GISs(Geographic Information Systems) have been in progress and many GIS applications have also been developed. From the domestic situation where many people are using mobile devices, because of the recent advances in the mobile technology, we can infer that the time will come when every individual will carry a mobile device with a GPS(Global Positioning System) module resulting from the development of a miniature GPS Module. Therefore, a mobile GIS that can allows users to deal with dynamic GIS data management and perform their tasks while moving will be required. This paper discusses the design and implementation of a mobile GIS using the shareware DBMS, called postgresSQL. The Mobile GIS in which a mobile concept is utilized at the GIS data server makes it possible to insert, delete, update GIS data, to zoom in and zoom out displayed maps, and to locate the user's position on the client device. Therefore, It is possible to manage dynamic GIS data in order to deal with GIS data on the maps while moving, connect various GIS data servers through the middleware, and connected with ITS (Intelligent Transport System) which is one of applications of the Mobile GIS developed in this paper.