• 제목/요약/키워드: High modulation index

검색결과 101건 처리시간 0.025초

Diffraction Behaviors of New Photopolymers and their Diffuser Properties

  • Yoon, Hyuk;Kim, Jae-Hong;Lee, Seung-Hwan;Paek, Sang-Hyon;Choi, Dong-Hoon
    • Journal of Information Display
    • /
    • 제5권1호
    • /
    • pp.22-27
    • /
    • 2004
  • Photopolymers are quite promising candidates for holographic data storage and diffusers because of their high sensitivity and high refractive index modulation. New photopolymers were prepared using the cellulose ester binder bearing different kinds of monomer. The holographic gratings were elaborated successfully in these photopolymer samples by conventional optical interference method. We investigated the dynamic behavior of the diffraction efficiency and the effect of the functionality of the monomer doped into the polymer binder. Triacrylate monomer doped photopolymer showed the highest diffraction efficiency of around 80-90 %, even under low intensity of writing beam (I=2 mW/$cm^2$). We inscribed the gratings of the glass diffuser on the surface of the photopolymer and investigated their diffusion properties.

스텝 펄스파를 사용하는 캐스케이드 인버터에서 스위치의 간단한 도통각 계산법 (A Simple Method for Conducting Angle Calculation of Switching Devices in Cascaded Inverters Using Step Pulse Waves)

  • 김형창;김태진;강대욱;현동석
    • 전력전자학회논문지
    • /
    • 제8권6호
    • /
    • pp.488-495
    • /
    • 2003
  • 최근에 높은 전력과 전압의 적용을 위한 방법으로써 PWM 방법보다는 스텝 펄스파를 이용해 출력 전압 레벨을 조합하는 멀티레벨 인버터가 폭 넓게 사용되어지고 있다. 이 방식은 도통각을 통해 한주기에 한번만 온, 오프 하기 때문에 스위칭 손실 측면에서 유리한 특성을 갖는다. 본 논문에서는 도통각을 얻는 간단한 방법을 제안하며 이 방법은 출력 전압 레벨에 의해 나누어진 기준 전압 파형의 전압-시간 면적들을 통해 인버터의 출력 스텝 펄스파를 구성한다. 또한 제안한 방법은 근사법에 의한 연립방정식의 해를 구할 필요가 없기 때문에 기존의 방법과는 달리 계산량을 줄일 수 있고 온 라인에 의해 도통각을 얻을 수 있는 장점이 있다.

전류형 GTO 컨버터의 SHE-PWM 실시간제어기법 (On-line Techniques of SHE-PWN for Current Source GTO Converter)

  • 최재호;팽성일;채경훈
    • 전력전자학회논문지
    • /
    • 제4권6호
    • /
    • pp.523-530
    • /
    • 1999
  • 본 논문은 전류형 GTO 컨버터의 SHE-PWN 실시간 제어기법을 제안한다. 제안된 방법은 변조지수에 따라서 실시간으로 GTO 스위치의 턴-온/오프 주기를 계산할 수 있도록 Loop-up Table을 선형화 하였다. 제안된 방법에 의해서 컨버터의 DC 출력전류를 빠르고 연속적으로 제어하면서 컨버터의 AC 입력전류 파형을 정현파로 유지하고 동시에 역률을 ‘1’로 제어할 수 있다. 본 논문에서 SHE-P주 선형화 기법과 고 역률 제어기법을 제안하고 이들 성능을 해석적으로 검토하였다. 시뮬레이션과 실험 결과로부터 제안된 기법의 타당성을 입증하였다.

  • PDF

Two Modified Z-Source Inverter Topologies - Solutions to Start-Up Dc-Link Voltage Overshoot and Source Current Ripple

  • Bharatkumar, Dave Heema;Singh, Dheerendra;Bansal, Hari Om
    • Journal of Power Electronics
    • /
    • 제19권6호
    • /
    • pp.1351-1365
    • /
    • 2019
  • This paper proposes two modified Z-source inverter topologies, namely an embedded L-Z-source inverter (EL-ZSI) and a coupled inductor L-Z source inverter (CL-ZSI). The proposed topologies offer a high voltage gain with a reduced passive component count and reduction in source current ripple when compared to conventional ZSI topologies. Additionally, they prevent overshoot in the dc-link voltage by suppressing heavy inrush currents. This feature reduces the transition time to reach the peak value of the dc-link voltage, and reduces the risk of component failure and overrating due to the inrush current. EL-ZSI and CL-ZSI possess all of the inherent advantages of the conventional L-ZSI topology while eliminating its drawbacks. To verify the effectiveness of the proposed topologies, MATLAB/Simulink models and scaled down laboratory prototypes were constructed. Experiments were performed at a low shoot through duty ratio of 0.1 and a modulation index as high as 0.9 to obtain a peak dc-link voltage of 53 V. This paper demonstrates the superiority of the proposed topologies over conventional ZSI topologies through a detailed comparative analysis. Moreover, experimental results verify that the proposed topologies would be advantageous for renewable energy source applications since they provide voltage gain enhancement, inrush current, dc-link voltage overshoot suppression and a reduction of the peak to peak source current ripple.

한쪽 거울면의 격자 위상이 π/2인 DFB 레이저의 시뮬레이션과 검정 (Simulation and Examination for DFB Lasers with Grating Phase of π/2 on One Mirror Face)

  • 권기영
    • 한국소프트웨어감정평가학회 논문지
    • /
    • 제15권2호
    • /
    • pp.101-109
    • /
    • 2019
  • 광대역 광통신 시스템에 사용되는 레이저는 우수한 주파수 선택성과 모드 안정성을 가져야한다. DFB(Distributed Feedback) 레이저는 고주파로 전류 변조를 하더라도 발진 주파수의 변화가 적다. 본 연구에서는 무반사 코팅을 하지 않은, 두 거울 면을 가진 1.55um의 파장을 갖는 DFB 레이저에서 이득격자와 굴절률 격자가 동시에 존재할 때, 시뮬레이션 소프트웨어를 개발하여 종 방향으로의 발진 모드의 발진 이득과 발진 주파수를 해석하였다. 왼쪽 거울 면에서의 격자 위상은 π/2로 고정하고, 오른쪽 거울 면에서의 격자 위상 값은 변화시켰다. 오른쪽 거울 면에서의 격자 위상 값이 π와 0일 때, κL이 2~6의 범위에 있어야 주파수 안정도가 향상된다. 거울 면에서의 격자 위상에 관계없이 발진 모드의 문턱 전류를 낮추기 위해서는, κL이 8보다 커야한다.

DFB 레이저의 빔 분포 시뮬레이션과 검정 (Simulation and Examination for Beam Profile of DFB Laser)

  • 권기영;기장근
    • 한국소프트웨어감정평가학회 논문지
    • /
    • 제15권1호
    • /
    • pp.71-78
    • /
    • 2019
  • 광대역 광통신 시스템에 사용되는 레이저는 우수한 주파수 선택성과 모드 안정성을 가져야한다. DFB(Distributed Feedback) 레이저는 고주파로 전류 변조를 하더라도 발진 주파수의 변화가 적다. 본 연구에서는 무반사 코팅을 하지 않은, 두 거울 면을 가진 1.55um의 파장을 갖는 DFB 레이저에서 이득 격자와 굴절률 격자가 동시에 존재할 때, 시뮬레이션 소프트웨어를 개발하여 종 방향으로의 발진 모드의 빔 분포를 해석하였다. 굴절률 격자와 이득 격자가 거울 면에서 갖는 위상 값의 변화에 따라서 DFB 레이저의 발진 모드에 대한 빔 분포 |R(z)|와 |S(z)|, 그리고 방사전력비 Pl/Pr를 비교 검증하였다. 거울 면에서의 격자 위상에 관계없이 발진 모드의 문턱 전류를 낮추고 주파수 안정성을 높이기 위해서는, κL이 8보다 커야한다.

듀얼 영 벡터 모드를 갖는 2상 RCD-PWM기법에 의한 유도 모터의 스위칭 소음저감 (Switching Noise Reduction of Induction Motor by a Two-Phase RCD-PWM Technique with Dual Zero Vector Modes)

  • 오승열;위석오;정영국;임영철
    • 전력전자학회논문지
    • /
    • 제9권6호
    • /
    • pp.525-535
    • /
    • 2004
  • 본 연구에서는 높은 변조지수 M 영역에서는 소음 및 고조파 스펙트럼의 광대역화 효과가 저하되는 2상 RCD-PWM(Random Centered Distribution PWM)기법의 문제점을 개선하고자, 듀얼 영 벡터 모드를 갖는 2상 RCD(Dual Zero Vector Modes RCD : DZRCD)기법을 제안하였다. 제안된 2상 DZRCD기법은 변조지수 M=0.8을 기준으로 하여 M이 0.8보다 큰 영역에서는 영 벡터로 $V_0$(111)를 선택하고, 0.8보다 작은 영역에서는 $V_0$(000)를 선택한다. 제안된 방법을 16비트 마이크로 콘트롤러인 C-167기반의 유도 모터 구동 시스템에 적용해 본 결과, M이 0.8이상인 영역에서 모터의 전압 / 전류 및 스위칭 소음 스펙트럼의 광대역화 특성이 종전의 방법과 비하여 우수함을 확인할 수 있었다.

Rumen bacteria influence milk protein yield of yak grazing on the Qinghai-Tibet plateau

  • Fan, Qingshan;Wanapat, Metha;Hou, Fujiang
    • Animal Bioscience
    • /
    • 제34권9호
    • /
    • pp.1466-1478
    • /
    • 2021
  • Objective: Ruminants are completely dependent on their microbiota for rumen fermentation, feed digestion, and consequently, their metabolism for productivity. This study aimed to evaluate the rumen bacteria of lactating yaks with different milk protein yields, using high-throughput sequencing technology, in order to understand the influence of these bacteria on milk production. Methods: Yaks with similar high milk protein yield (high milk yield and high milk protein content, HH; n = 12) and low milk protein yield (low milk yield and low milk protein content, LL; n = 12) were randomly selected from 57 mid-lactation yaks. Ruminal contents were collected using an oral stomach tube from the 24 yaks selected. High-throughput sequencing of bacterial 16S rRNA gene was used. Results: Ruminal ammonia N, total volatile fatty acids, acetate, propionate, and isobutyrate concentrations were found to be higher in HH than LL yaks. Community richness (Chao 1 index) and diversity indices (Shannon index) of rumen microbiota were higher in LL than HH yaks. Relative abundances of the Bacteroidetes and Tenericutes phyla in the rumen fluid were significantly increased in HH than LL yaks, but significantly decreased for Firmicutes. Relative abundances of the Succiniclasticum, Butyrivibrio 2, Prevotella 1, and Prevotellaceae UCG-001 genera in the rumen fluid of HH yaks was significantly increased, but significantly decreased for Christensenellaceae R-7 group and Coprococcus 1. Principal coordinates analysis on unweighted UniFrac distances revealed that the bacterial community structure of rumen differed between yaks with high and low milk protein yields. Furthermore, rumen microbiota were functionally enriched in relation to transporters, ABC transporters, ribosome, and urine metabolism, and also significantly altered in HH and LL yaks. Conclusion: We observed significant differences in the composition, diversity, fermentation product concentrations, and function of ruminal microorganisms between yaks with high and low milk protein yields, suggesting the potential influence of rumen microbiota on milk protein yield in yaks. A deeper understanding of this process may allow future modulation of the rumen microbiome for improved agricultural yield through bacterial community design.

Enhancement of light extraction efficiency in vertical light-emitting diodes with MgO nano-pyramids structure

  • Son, Jun-Ho;Yu, Hak-Ki;Lee, Jong-Lam
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 춘계학술회의 초록집
    • /
    • pp.16-16
    • /
    • 2010
  • GaN-based light-emitting diodes (LEDs) are attracting great interest as candidates for next-generation solid-state lighting, because of their long lifetime, small size, high efficacy, and low energy consumption. However, for general illumination applications, the external quantum efficiency of LEDs, determined by the internal quantum efficiency (IQE) and the light extraction efficiency, must be further increased. The IQE is determined by crystal quality and epitaxial layer structure and high value of IQE more than 70% for blue LEDs have been already reported. However, there is much room for improvement of light extraction efficiency because most of the generated photons from active layer remain inside LEDs by total internal reflection at the interface of semiconductor with air due to the high refractive index difference between LEDs epilayer (for GaN, n=2.5) and air (n=1). The light confining in LEDs will be reabsorbed by the metal electrode or active layer, reducing the efficacy of LEDs. Here, we present the first demonstration of enhanced light extraction by forming a MgO nano-pyramids structure on the surface of vertical-LEDs. The MgO nano-pyramids structure was successfully fabricated at room temperature using conventional electron-beam evaporation without any additional process. The nano-sized pyramids of MgO are formed on the surface during growth due to anisotropic characteristics between (111) and (200) plane of MgO. The ZnO layer with quarter-wavelength in thickness is inserted between GaN and MgO layers to increase the critical angle for total internal reflection, because the refractive index of ZnO (n=1.94) could be matched between GaN (n=2.5) and MgO (n=1.73). The MgO nano-pyramids structure and ZnO refractive-index modulation layer enhanced the light extraction efficiency ofV-LEDs with by 49%, comparing with the V-LEDs with a flat n-GaN surface. The angular-dependent emission intensity shows the enhanced light extraction through the side walls of V-LEDs as well as through the top surface of the n-GaN, because of the increase in critical angle for total internal reflection as well as light scattering at the MgO nano-pyramids surface.

  • PDF

DWT의 주파수 특성을 이용한 실험적 디지털 영상 워터마킹 (An Empirical Digital Image Watermarking using Frequency Properties of DWT)

  • 강이슬;이용석;서영호;김동욱
    • 방송공학회논문지
    • /
    • 제22권3호
    • /
    • pp.295-312
    • /
    • 2017
  • 디지털 영상 콘텐츠는 가장 정보 함축적이며 고부가가치의 콘텐츠이다. 따라서 이 콘텐츠들의 지적재산권을 보호할 필요가 있으며, 본 논문도 이것을 목적으로 한 디지털 워터마킹 방법을 제안한다. 제안하는 방법은 디지털 영상에 대한 2차원 이산웨이블릿변환(2-Dimensional Discrete Wavelet Transform, 2D-DWT)의 주파수 특성을 이용하며, 영상의 국부적 또는 특정 데이터를 사용하지 않고 전역적 데이터에 디지털 워터마크를 삽입하는 방법을 사용한다. 디지털 워터마크를 삽입하는 방법은 간단한 양자화 인덱스 변조(Quantization Index Modulation, QIM) 방법을 사용하며, 워터마크 데이터를 다중으로 삽입하는 다중 워터마킹 방식을 사용한다. 워터마크를 추출할 때 다중 워터마크를 모두 추출하여 간단한 통계적 방법으로 최종 워터마크 데이터를 결정한다. 이 방법은 워터마크 삽입과정에서의 파라미터들을 실험적으로 결정하는 실험적 방법이다. 제안하는 방법은 다양한 공격에 대해 다양한 영상을 대상으로 실험을 수행하며, 기존의 대표적인 방법들과 그 성능을 비교하여 제안한 방법의 우수성을 보인다.