• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.716-718
• /
• 2009

The effects of the temporal dark image sticking phenomena on bright screen were investigated with various He, Ne contents and a high Xe content fixed at 11% in the 50-in. ac-PDPs. In this work, the disappearance time and the display luminance between the before and after discharge in the discharge and non-discharge regions were measured with 0%, 35%, and 50% He contents. Consequently, the temporal dark image sticking on bright screen was reduced with the increase of He contents compared with the non-He (0%) content.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2007년도 춘계학술논문발표회 논문집
• /
• pp.152-158
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1430-1432
• /
• 2008

We have developed a high-contrast ambient-light rejection projection screen with surface micro-structures for front and rear projection displays with an oblique-angle projector. We have fabricated prototype screens that show a better than $10{\times}$ improvement in contrast compared to a matte-white screen under various ambient lighting conditions and screen luminance.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1991년도 추계학술발표회논문집
• /
• pp.5-10
• /
• 1991

There are many articles about the HID lamps about it's characteristics and simulation methods for lamps design or ballast design. For the eletronic ballasts of HID lamps, There are some problems caused by acoustic resonance which destabilizes the arc of HID lamps. So, some studies suggest the methods to avoid it. For example, the methods to avoid it. For example, the methods suggested are high frequency driving over 100kHz, and mixed frequency driving which alternates high frequency and low frequency, and square wave driving etc. This study suggests the electronic ballast of HID lamps which solves the problems of acoustic resonance, and which can control the luminance by constant current boosted chopper of which frequency is 30kHz and by the sqarewave driving of which frequency is 55.5Hz. As follows, we have the good eletronic ballast for HID lamps which has the characteristics of a light weight, and a function of luminance control and a high quality luminosity and which saves electrical energy.

• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.37-41
• /
• 2018

$Y_3A_{l5}O_{12}:Ce^{3+},Pr^{3+}$ single crystal phosphor was prepared by floating zone method. single crystal was confirmed to have a Ia-3d (230) space group of cubic structure and showed regular morphology. The optical properties, single crystal exhibited a emission band from green, yellow wide wavelength and 610nm, 640nm red wavelength vicinity. The luminance maintenance rate was decreased by phonon with increasing temperature, but high luminance is maintained more than powder phosphor. In addition, $Y_3A_{l5}O_{12}:Ce^{3+},Pr^{3+}$ single crystal phosphor was applied to a high power blue laser diode, we implemented high power white laser lightings. and it was confirmed that thermal properties over time, due to the effective heat transfer of complete crystal structure. We confirmed that excellent radiant heat properties than powder phosphor was applied to a high power white laser diode.

• KIEAE Journal
• /
• 제12권5호
• /
• pp.77-84
• /
• 2012

Daylighting is the controlled admission of natural light into a space, reducing electric lighting and saving energy. By providing a direct link to the dynamic and perpetually evolving patterns of outdoor illumination, daylighting helps create a visually stimulating and comfort environment for building occupants, while reducing energy costs. Especially, however, glare is the most important factor in daylighting, which is issued by incoming direct sunlight into windows. This study analyzed the discomfort glare on a daylighting window by using Image processing methodology and found a solution to problems with glare source of occupants. There are several ways to evaluate discomfort glare such as UGR (Unified Glare Rating) of CIE, DGI (Daylight Glare Index, Hopkinson, 1972) and VCP (Visual Comfort Probability) of IES. These are used to apply to the relatively little artificial light source and they cannot cover discomfort glare from a real daylighting window. In this regarding, this paper aimed to calculate DGI index of the real daylighting window in a experimental space by using image processing methodology. The variables and outcomes are luminance distribution of non-shading window, effect of venetian blind installed on the window and locations related to position index of DGI.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1491-1492
• /
• 2011

In this study, we investigated about the effect of hole transport layer materials(${\alpha}$-NPD, TPD) depending on the electrical properties of organic light emitting diode. In deposition method, we used thermal evaporation and it was a method for performing thin film by attaching vaporizing a molecule to substrate in a high thermal and vaccum. We analyzed luminance, current density, external quantum efficiency and current efficiency in 40 [nm] as optimization thickness of ${\alpha}$-NPD and TPD. In result of experiment, maximum luminance of TPD had 1.1 times higher than ${\alpha}$-NPD, but ${\alpha}$-NPD had luminance, external quantum efficiency, and current efficiency higher than TPD in low operating voltage. Actually, ${\alpha}$-NPD had efficiency higher than TPD in low operating voltage.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.91-98
• /
• 2006

A light guide panel (LGP) is an element of the LCD back light unit, which is used for display devices. In this study, the laser marking process is applied to the fabrication of light guide panels as the new fabrication process. In order to obtain a light guide panel which has high luminance and uniformity, four principal parameters such as power, scanning speed, ratio of line gap, and number of line were selected. A Web-based design tool was developed to generate patterns of light guide panel at any location, and the tool may assist the designer to develop optimized patterns. Topcon-BM7 was used for luminance measurement of each specimen with $100mm{\times}100mm$ area. By Taguchi method optimized levels of each parameters were found, and luminance of $3523cd/cm^2$ and uniformity of 92% were achieved using the laser machined BLU.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.180-186
• /
• 2005

As a driving method of AC-PDP, Address-Display Separated(ADS) driving has been widely adopted for its simple architecture and low discharge failure rate. However, a high definition like a HDTV has defect of long addressing time by reason of a number of pixels. Priming effect isn't fully sustained because of long addressing time during the address period. Therefore, it has different wall charge and luminance of each addressing time in the sustain period. In this study, we suggest a new driving waveform on the address period to improve these defects. We applied a ramp waveform, instead of a square waveform, to an address period in ADS, for operating on the AC-PDP, which used the conventional gas [He-Ne-Xe]. When the ramp waveform is applied to the address period, we experimented for uniform wall charge and the improved luminance by sustained Priming effect at each addressing time in the sustain period.

• 전기화학회지
• /
• 제1권1호
• /
• pp.24-27
• /
• 1998

Electroluminescence (EL) comes from the light emission obtained by the electrical excitation energy passing through a phosphor layer undo. an applied high electrical field $(10^6 V/cm)$. The preparation of white and blue phosphors and characterizations of light emitting alternating current powder electroluminescent devices (ACPELDs) were investigated. In this work, we fabricated two kinds of ELDs, that is, yellow electroluminescent device (B-ELD), blue electroluminescent device (B-ELD). The basic st.uctures of Y-ELD and B-ELD are ITO (Indium Tin Oxide)/phosphor layer/Insulator layer/Carbon electrode and ITO/Phosphor layer/Insulating layer/carbon electrode, respectively. Another structures of ITO/Phosphor and Insulator mixture layer/Backelectrode are introduced. EL spectra and luminance of two types of ELDs were measured by changing voltage at fixed frequency 0.4kHz, 1.5kHz. Blue and yellow phosphors prepared in this work show $50cd/m^2\;and\;30cd/m^2$ of luminance at 400Hz, 150V.