• Bulletin of the Korean Chemical Society
• /
• 제19권6호
• /
• pp.617-618
• /
• 1998

A simple and reproducible pretreatment method was developed for the determination of dioxins in milk sample. Liquid-liquid extraction (LLE) was used for the initial extraction of the analyte from milk. For the elimination of interferences coextracted from milk, acid treatment followed by multilayer silica gel, and then alumina column clean-up were performed. The clean extract could be obtained without carbon column or high performance liquid chromatographic (HPLC) clean-up procedure. Polychlorinated biphenyles (PCBs) and dioxins were separated on neutral alumina activated at 180 ℃ for 12 hours. The final extract was analyzed by HPLC and high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS). The recovery of dioxins spiked in milk at 75-300 ppt level was 83.3-98.9% and their relative standard deviation was 4.1-14%.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.401-409
• /
• 2013

Numerical analysis on RF (Radio-Frequency) thermal plasma treatment of micro-sized Ni metal was carried out to understand the synthesis mechanism of nano-sized Ni powder by RF thermal plasma. For this purpose, the behaviors of Ni metal particles injected into RF plasma torch were investigated according to their diameters ($1{\sim}100{\mu}m$), RF input power (6 ~ 12 kW) and the flow rates of carrier gases (2 and 5 slpm). From the numerical results, it is predicted firstly that the velocities of carrier gases need to be minimized because the strong injection of carrier gas can cool down the central column of RF thermal plasma significantly, which is used as a main path for RF thermal plasma treatment of micro-sized Ni metal. In addition, the residence time of the injected particles in the high temperature region of RF thermal plasma is found to be also reduced in proportion to the flow rate of the carrier gas In spite of these effects of carrier gas velocities, however, calculation results show that a Ni metal particle even with the diameter of $100{\mu}m$ can be completely evaporated at relatively low power level of 10 kW during its flight of RF thermal plasma torch (< 10 ms) due to the relatively low melting point and high thermal conductivity. Based on these observations, nano-sized Ni metal powders are expected to be produced efficiently by a simple treatment of micro-sized Ni metal using RF thermal plasmas.

• Journal of Nutrition and Health
• /
• 제16권3호
• /
• pp.200-208
• /
• 1983

The present studies were designed to compare the effects of both dietary fat levels and P / S ratio on lipid components in plasma and tissues. Changes in plasma HDL-cholesterol, cholesterol and TG, and also in tissue cholesterol and TG were determined in young rats fed diets providing total dietary fat as 10%, 25% or 45% of calories and P / S ratio as 0.2 or 4.0. Plasma cholesterol levels were getting higher as dietary fat levels increased at P / S 0.2. Plasma cholesterol was lower in rats fed dietary fat either 25% or 45 %, each with P / S 4.0. But at 10% no change in plasma cholesterol were observed by P / S 4.0 because of a possible insufficiency of the absolute amount of PUFA. HDL-cholesterol was rather less sensitive to the modification of dietary fat level, but was reduced in rats fed diets of P / S 4.0 at either 25% or 45% fat, even though HDL-cholesterol were increased in the group of 10% with P / S 0.2. Total cholesterol per g- liver were significantly increased as dietary fat levels increased. Liver cholesterol levels were higher in rats fed diets of P / S 4.0 at higher fat levels (25% or 45%) which possibly suggested that a reduction of plasma cholesterol by high PUFA diet was not at least from a decreased synthesis of cholesterol in liver. However, in muscle no significant differences were found by feeding high P / S ratio at each levels of fat. At 10% fat level, compared to 25% or 45%, cholesterol level was lower in g-liver but higher in g- muscle. Plasma TG was decreased as more dietary fat were supplied at P / S ratio, but no consistant response obtained at low P / S ratio. TG per g-liver were reduced by feeding P / S 4.0 diet at 10% or 45% fat level but no differences were found in muscle. P / S 4.0 diet was more efficient in lowering plasma cholesterol TG and HDL-cholesterolt levels only if fat level was more than 25% of the total calories And young rats were more resistant to dietary fat modification.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권6호
• /
• pp.506-513
• /
• 2004

Spirulina produces $\gamma$-linolenic acid (GLA), an important pharmaceutical substance, in a relatively low level compared with fungi and plants, prompting more research to improve its GLA yield. In this study, metabolic flux analysis was applied to determine the cellular metabolic flux distributions in the GLA synthetic pathways of two Spiru/ina strains, wild type BP and a high­GLA producing mutant Z19/2. Simplified pathways involving the GLA synthesis of S. platensis formulated comprise of photosynthesis, gluconeogenesis, the pentose phosphate pathway, the anaplerotic pathway, the tricarboxylic cycle, the GLA synthesis pathway, and the biomass syn­thesis pathway. A stoichiometric model reflecting these pathways contains 17 intermediates and 22 reactions. Three fluxes - the bicarbonate (C-source) uptake rate, the specific growth rate, and the GLA synthesis rate - were measured and the remaining fluxes were calculated using lin­ear optimization. The calculation showed that the flux through the reaction converting acetyl­CoA into malonyl-CoA in the mutant strain was nearly three times higher than that in the wild­type strain. This finding implies that this reaction is rate controlling. This suggestion was sup­ported by experiments, in which the stimulating factors for this reaction $(NADPH\;and\;MgCl_{2})$ were added into the culture medium, resulting in an increased GLA-synthesis rate in the wild type strain.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.550-555
• /
• 2002

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller or the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed for a hierarchical control structure consisting of basic level and high level that modify control rules.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.202-207
• /
• 2001

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed for a hierarchical control structure consisting of basic level and high level that modify control rules.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.327-339
• /
• 2003

In this paper, a self-organizing fuzzy controller(SOFC) for the industrial robot manipulator with a actuator located at the base is studied A fuzzy login composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult SOFC is proposed for a hierarchical control structure consisting of basic level and high level that modify control rules. The proposed SOFC scheme is simple in structure, fast in computations and suitable for implementation of real-time control. Performance of the SOFC is illustrated by simulation and experimental results for robot with low joints.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.125-130
• /
• 1999

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed for a hierarchical control structure consisting of basic level and high level that modify control rules.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.165-170
• /
• 2000

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, in the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed for a hierachical control structure consisting of basic level and high level that modify control rules.

• 한국정보과학회논문지:시스템및이론
• /
• 제28권5호
• /
• pp.259-267
• /
• 2001

칩의 집적도에 비례하여 설계검증 및 칩 제작 후의 결함점검은 갈수록 어려워지며 이러한 테스트 문제의 원초적 해결을 위하여 다양한 테스트설계 기술이 널리 개발되고 있다. 상위 수준의 테스트설계에서는 회로의 기능에 대해서는 알 수 있으나 구조에 대해서는 알 수 없고, 하위 수준의 테스트설계에서는 회로의 구조를 알 수 있으나 기능은 알 수 없다. 따라서 테스트 설계는 기능을 기술하는 상위 수준에서부터 고려되어 하위 게이트수준에서 스캔플립플롭을 선택하여야 최적화된 성능을 얻을 수 있다. 본 논문에서는 테스트용이도를 증진시키기 위해, 상위수준의 기능정보에 대해서는 테스트점을 삽입하여 제어흐름(control flow)을 변경하고, 상위 수준의 합성 후에 하위 수준에서 스캔플립플롭을 선택하여 다시 합성하는 상위.하위 수준에서 통합된 테스트 합성 기술을 제안한다. 실험결과 통합된 테스트 합성 기술이 대부분의 벤치마크 회로에서 높은 고장검출율을 보여주고 있다.