• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.109-113
• /
• 2001

A high-efficiency electronic ballast for HID lamps is presented. The ballast consists of a PFC and a resonant inverter. To reduce losses of ballast,7C link voltage is determined by taking into account the peak voltage of lamp and a filter-inductor at Bridge diode is employed in order to remove harmonics from PFC. The flux density B$_{m}$ is kept 0.2[T] on all of inductors. A small inductor is connected in series with an electrolytic capacitor of PFC to be operated no high-frequency components. The acoustic resonance is eliminated using the spread spectrum technique. Electronic ballast for 250W metal-halide lamp is implemented and the experimental results show that 97% efficiency, no acoustic resonance and low conducted EMI level.l.

• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.79-87
• /
• 2012

Currently, The method to produce a brewing body for dentistry supplementation water produces a brewing body by fabrication, burying and it is heat wish in city gas and oxygen. It uses an original judgment found airplane the brewing body uses a spring of the back wait that melting temperature dissolved various alloys in by a blow pipe, and to generate centrifugal force and produces it. In addition, because it uses preheating to dissolve an alloy in general, it is hard to regulate the appropriate melting temperature of the alloy and brewing time and generates a brewing defect hereby same as gas industry and pinhole and shows the defect of the supplementation thing due to the super-heating. In this paper, We developed the high induction heating system which it could set brewing time,temperature and had durability and security,by the kind of the alloy to produce a high quality prosthetic thing brewing body.

• 전력전자학회논문지
• /
• 제8권6호
• /
• pp.504-511
• /
• 2003

본 연구에서는 네온 변압기를 세라믹 계열의 압전 변압기를 이용한 인버터식 네온관용 변압기를 제안하였다 인버터식 네온관용 압전 변압기의 주요 구성은 정류부, 발진부, 공진형 하프브릿지 인버터회로부 및 압전 변압기부로 구성 제작하였다. 네온관용 변압기는 지금까지 개발된 압전 변압기 용량 보다 대부분 큰 용량을 필요로 하고 있기 때문에 압전 변압기의 용량 증가를 위해 병렬 구동하였다 이때 병렬로 연결된 단층형 압전 변압기간 내부 임피던스 값의 불일치로 발생하는 불평형 전류를 최소화 하기 위하여 압전 변압기별로 LC 필터값을 분석 부착하여 전압의 왜곡율을 최소화 하여 안정된 정현파 출력을 구현하였다. 그리고 이를 컴퓨터 시뮬레이션 실험과 실제 네온관 부착 실험을 통하여 전력 밀도와 절연 레벨이 높고, 누설 자속이 없는 소형, 경량화된, 압전 변압기를 적용한 인버터식 네온관용 변압기가 기존의 자기식 네온관용 변압기 보다 우수함을 비교 입증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.573-576
• /
• 1999

본 논문은 다양한 분야에 적용이 가능한 고압 직류 전원장치를 개발에 관한 것이다. 개발된 이 장치는 soft switching 기술을 이용하여 인버터의 전력소자가 switching 때문에 발생하는 손실과 EMI를 감소시키기 위하여 영전압 스위칭(ZVS; Zero Voltage Switching) 방식을 채택하였다. 이러한 고주파 인버터의 구동방식을 단일 Chip 제어기로 쉽게 구현할 수 있는 영전압 스위칭 위상전이 제어 직렬 공진형(ZVS PSC-SRI; ZVS Phase Shifted Control Series Resonant Inverter)으로 선택하여 제어기의 신뢰도를 높였고 장치의 고효율화(90%이상) 확보와 장치의 소형화뿐만 아니라 실용화를 위한 저가격화를 절충할 수 있는 방법을 중점적으로 연구하였다. 본 논문에서 고주파 고압 직류 전원 장치의 구성 및 설계, ZVS PSC-SR 인버터의 설계 그리고 고주파 고압 변압기의 설계에 관한 내용을 자세히 설명하고 제작된 고주파 고압 전원장치의 실험결과 및 고찰을 기술한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.237-240
• /
• 2006

In this paper, a new design using a simulation method was proposed. And to estimate its validity, various electronic and optical data were measured after making a 150[W] electronic ballast for high pressure sodium lamps. Using PSpice 9.1, the best solutions of various parameters such as the resonant frequency, the lamp output voltage, and the current of the electronic ballast were obtained. The power factor of the system was 99.8[%], the crest factor 1.44, the THD 4.99[%], and the weight 0.5[kg]. These are very good characteristics compared with a conventional HPS Lamp ballast.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권12호
• /
• pp.624-630
• /
• 2001

The trend of the regulations on environmental issues are getting tight. Responding to this trend new technologies such as moving electrodes, wide pitch and pulsed power supply are also introduced in the electrostatic precipitator(EP) systems. The introduction of wide pitch and moving electrodes enhances the system performance of the EPs by improving air-flow and by improving the ash reentrainment on rapping. The power supplies for the EPs developed up to date include thyristor-based dc or intermittent type, SMPS(switching mode power supply) type and the pulsed-power supply type. The use of the pulsed ones is known to improve dust-collecting efficiency of high resistivity ash and reduces back corona occurrence in the collecting plate. There are two kinds of pulsed-power supplies; one with pulsed transformers and the other with direct dc switching devices. The latter uses rotary spark gap switches or semiconductor switches. Both have the merits and demerits: the spark gap switches are simple and robust but has short life time, hence, high maintenance cost, whereas the semiconductor switches have long life time but are costly. In this study, A high voltage power supply with superimposing voltage pulse on dc source was developed for EPs. This study describes circuit topology, operating principle of the scheme, and analysis of experimental results on Dong-Hae Power Plant. The pulsed power supply consists of a variable dc power supply with ratings of 60kV, 800mA and pulse generator which is made of high voltage thyristor-diode switch strings, an LC resonant tank and a blocking inductor. The pulse generator generates variable pulse-voltage up to 70kV using a high frequency resonant inverter with a variable dc source. Two prototypes were built and tested on 250MW DongHae power plant to verify the possibility of the commercial use and the normal operation in the transient states.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.62-63
• /
• 2011

The wireless power transfer system using electromagnetic resonance is consists of PFC circuit, LLC resonant converter, high frequency DC-AC inverter and ECR devices for wirelessly transmitting the power. The output voltage of the module with free input voltage is 1MHz, 230Vp-p. As a experimental result, the wireless power transmission is confirmed and it is varified the validity of the experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.916-917
• /
• 2008

In this paper, Switching damage of switches that is used to proposed power conversion system is reduced by soft switching way. dissipation by part resonance and my resonance stress for resonance of resonance circuit are decreased. Is acted by conversion system high effectiveness. Have following characteristic. Design snubber circuit that is used by switch protection in existent hard work rate Topology by resonant circuit for sogt switching, circuit structure was simple and control system is easy. Also, Can generate free output voltage by multi level Tuesday of output that use individuation Power Cell's Phase Shift PWM, and Low-end switching frequency the harmonic is few.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.111-115
• /
• 2000

In this paper, a prototype electronic ballast for 400W MH lamps is designed and implemented. To remove the phenomenon of acoustic resonance in the lamp being operated at high frequency, a spread spectrum method is employed on the ballast. Half-bridge resonant inverter, voltage-controlled-oscillator and PFC are used and the current of lamp is controlled with taking into account the voltage of lamp. The ballast is built with analog OP-amps and MOSFETs. The experimental results show the good performance as PF 0.93, ATHD 0.14, Ballast loss 22W at output 400W.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.993-997
• /
• 1998

This paper presents a two-switch boost chopper with a sinewave current shaping and power factor correction scheme, which is applied for driving electronic ballast using high frequency resonant inverter. A working principle of the proposed one-converter type electronic ballast with power factor correction and active filtering schemes is described on the bases of the equivalent circuit of each operation mode, together with operation analysis. The steady-state performance evaluations of this electronic ballast are illustrated and discussed in experiment.