DOI QR코드

DOI QR Code

Design of High Frequency Casting Machine for Dental using Induction Heating System

유도가열 시스템을 적용한 치과용 고주파 주조기 설계

  • 송성근 (전자부품연구원 디지털컨버젼스연구원) ;
  • 임상길 (전남대학교 대학원 전기공학과) ;
  • 이상훈 (한국승강기대학 승강기 전기설계과)
  • Received : 2012.06.02
  • Accepted : 2012.06.25
  • Published : 2012.08.31

Abstract

Currently, The method to produce a brewing body for dentistry supplementation water produces a brewing body by fabrication, burying and it is heat wish in city gas and oxygen. It uses an original judgment found airplane the brewing body uses a spring of the back wait that melting temperature dissolved various alloys in by a blow pipe, and to generate centrifugal force and produces it. In addition, because it uses preheating to dissolve an alloy in general, it is hard to regulate the appropriate melting temperature of the alloy and brewing time and generates a brewing defect hereby same as gas industry and pinhole and shows the defect of the supplementation thing due to the super-heating. In this paper, We developed the high induction heating system which it could set brewing time,temperature and had durability and security,by the kind of the alloy to produce a high quality prosthetic thing brewing body.

Keywords

References

  1. Hong-Sam Kim "A study on new software switching high frequency inverter for induction heating", kyungnam Univ a master's thesis, 2008.
  2. Gyu-Pan Cho etc 5, "Characteristics analysis of time sharing method VVVF type high frequency resonant inverter", JIEIE, vol 16, No.3 pp .20-28, 2002.
  3. Gyu-Pan Cho etc 5, "A Study on Characteristics Analysis of Time Sharing Type High Frequency Inverter Consisting of Three Unit Half-Bridge Serial Resonant Inverter", JIEIE, vol 15, No.1 pp .90-97, 2001.
  4. Jae-Hoon Yoo etc 1 " A Study on the Frequency Control on the Induction Heating System Using Two Step Resonant Inverter", JIEIE, vol 22, No.1 pp .95-103, 2008.
  5. Soon-ill Hong etc 1, "Design of High Frequency Inverter with Series-parallel Load-Resonant for Induction Heating Application", JIEIE, vol 14, No.6 pp .12-17, 2000.
  6. J. G. Cho, and K. Y. Joe, "Novel Zero Voltage and Zero Current Switching Full Bridge PWM Converter using Transformer Auxiliary Winding,: IEEE Trans., vol. 15, no. 2, pp250-257, 2000.
  7. H. Yu, H. Xudong, J. sheng, "A Novel Load Adaptive Zero Voltage Switching Utilizing Diode Reverse Recovery Current for Soft-Switching Choppers and Inverters", PESC, Conference Proceedings, vol. 1, pp. 146-151. 2001.