• 패션비즈니스
• /
• 제18권6호
• /
• pp.174-187
• /
• 2014

This study intended to propose a guideline designed to secure safety by developing a functional color design for the color of the ordinary working clothes worn in the actual industrial settings of the machine industry in national industrial complexes in Korea. For this, a total of 6 sets of actual working clothes were produced for test, using 2-color arrangements with blue, of varying brightness and chroma for top and bottom, in relation to the visibility proven in preceding studies and evaluated in the machine industry. Blue was suggested the best proper color for machine industry by previous studies. For the material of working clothes, a total of 111 swatches were collected from the Dongdaemoon Fabric Market, and they were analyzed for color values. A total of 6 materials were used to produce working clothes for testing, which represented high brightness, medium brightness, low brightness, high chroma, medium chroma, and low chroma. Clothes were tried at the industrial settings for machine industry in a national industrial complex located in Gyeongsangnam-do and the expert satisfaction evaluation was performed based on items related with safety. As a result, higher satisfaction was shown when the brightness difference of top and bottom clothes was greater, and for chroma, relatively higher satisfaction appeared when the chroma of both top and bottom clothes was high. To secure satisfaction for both brightness and chroma, it is possible to deduce that the 2-color arrangement using the strong tone with high brightness and high chroma and the dark tone with somewhat low brightness and high chroma would be effective. Top and bottom clothes in the same color with high chroma had high visibility but had somewhat low evaluation for harmonious arrangements. This indicated that the arrangement of vivid colors for top-bottom clothes is inappropriate.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.247-255
• /
• 2013

In this study, the colors and characteristics of Gwangbok-ro of Busan were analyzed in the standpoint of local images based on the examination of the facade designs of stores along the road of Gwangbok-ro, Busan a main street with massive population flow. To that end, the facades of stores, correlation with the city, color and locality were examined, and after the status of facade designs in Gwangbok-ro were identified through case survey by it, color images were analyzed. For color analysis, Munsell color system was used as basic tool. As a result of examining the colors in Gwangbok-ro area, the following status could be analyzed on 3 attributes of hue, brightness and chroma: First, analysis results of hue indicated that dominant color that covers 70% or more of the area represented mid brightness and low chroma in GY(36.1%) series, subsidiary color which covers 25% or more of the area mid brightness and low chroma in YR(26.5%) series, and accent color that covers less than 5% of the area high brightness and low chroma of GY(40%) series. Second, in brightness analysis, dominant color mostly represented mid brightness, subsidiary color mid brightness and accent color high brightness respectively. In particular accent color showed more intensive crowding phenomenon in high brightness. Third, as for chroma, dominant color, subsidiary color and accent color all are gathered in low chroma, however in small number of accent colors, peculiar high chroma appeared notable. In conclusion, the colors of Gwangbok-ro area analyzed based on the facade design of the stores along the road in this study were superficial colors that reflect the life of people in the area, artificial colors by improvement of the local environment. This study is meaningful in that the image of Gwangbok-ro was found through building colors in one part of the city Busan. It is judged that the study results would become useful as reference document in planning out environment colors later on.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.331-336
• /
• 2001

Aragonite type of precipitated calcium carbonate was synthesized by the successive reaction with hybridization of waste scallop shells with limestone. In the first step, carbonation was performed by using calcined limestone with low brightness, followed by the additional carbonation using calcined-hydrous scallop shells with high brightness. The temperature and the amount ratio of calcined limestone to calcined-hydrous scallop shells were examined as parameters in the experimental conditions. The products were characterized by XRD, SEM. in addition to measurements of brightness index. the specific surface area, and bulk density. The amount ratio of limestone to scallop shell affected not only the brightness but also morphologies of products. The increase in relative amounts of limestone leads to decrease in brightness and bumpy surface of particles. High temperature reaction produces aragonite particles with longer sizes and higher bulk densities. This study has made an attempt to establish the synthesis of aragonite with high brightness and high strength by utilization of waste scallop shells.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.349-353
• /
• 1999

In this paper, to fabricate the AC power electroluminescent device (PELD) with high brightness, new structure that constructed single emissive layer between electrodes was proposed. Dielectric and phosphor material structure that constructed single emissive layer between electrodes was proposed. Dielectric and phosphor material were BaTiO3 and ZnS:Cu respectively. Fabricated AC power EL devices were estimated by optical and electrical properties of EL spectrum, brightness, CIE coordinate system, transferred charge density and EL emission wave in time domain. With above results, we found that brightness of newly proposed AC powder EL power EL device was 2754 cd/m2 at 100V, 400 Hz and compared with conventional device structure.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.100-109
• /
• 1997

The objectives of this study was to decrease pollutions of bleaching effluent and was to enhanced brightness of non-chlorine bleached pulps by xylanase treatments. Xylanase cloned Esherichacoli(E. coli) capable of each of endo, exo-xylanase and acetyl-esterase were obtained from Bacillus stearothermophillus. These xylanase was maintained high activity in alkali and high temperature. Especially endo-xylanase would be more active in $60^{\circ}C$ and pH 11. Xylanase pretreatment(X) of unbleached pulp increased brightness, and decreased the degree of delignification. The degree of increase in brightness of pulp due to xylanase pretreatment was similar to non-enzyme treated pulp, regardless of the amount of enzyme added. Therefore, the addition of xylanase of 2 unit was recommended when considering costs of enzyme. The pulp bleached XO sequence had higher brightness and lower Kappa no, than O bleached pulp, while pulp bleached XP sequence had similar brightness and Kappa no. with P bleached pulp. In XOC/D, XOZ and XOP bleaching sequences, brightness and degree of delignification were improved. The C/D and Z stage bleached pulp was good effect on rate of raise in brightness and Kappa no., but P stage bleached pulp had similar level in non-enzyme treated bleaching sequence.

• Transactions on Electrical and Electronic Materials
• /
• 제8권4호
• /
• pp.178-181
• /
• 2007

We have designed high performance prism light-guide plate (LGP) in 17 inch TFT-LCD. In test result to embody high brightness BLU in case of LGP of base and upper surface with 17 inch, thickness 8 mm adding prism construct, it is superior brightness improvement than previous that of printing form about some 20% and in this course to embody actual material it succeeded prism LGP production by 17 inch injection form process.

• 한국정보통신학회논문지
• /
• 제10권7호
• /
• pp.1275-1280
• /
• 2006

본 논문에서는 국산램프(K社)와 일본제품과의 세경화에 따른 휘도 분포를 비교 분석함으로써 고휘도를 구현하기 위한 효율적인 구성 기준을 마련할 수 있다. 국산 LGP(S社)와 일본제품과의 특성, 휘도, 색도 및 균일도를 비교 분석함으로써 조기 국산화 및 국산화 안정화를 시킬 수 있도록 하고, 시트 변화에 따른 휘도 분포를 비교 분석함으로써 이상적인 시트 구성을 하였다.

• 한국정보통신학회논문지
• /
• 제10권10호
• /
• pp.1810-1814
• /
• 2006

이 논문은 가스압력으로부터 휘도, 인가된 전압과 구동 주파수 상태를 측정하였고, 평판형광램프의 방전특성을 측정하고 논의하였다. 진공 여기($350^{\circ}C$, 1시간)후 수명과 휘도는 놀랍게 향상되었다. 램프내에 가스 압력이 높을 때 또한 휘도는 자동적으로 증가했다. 그러나 구동전압과 동작의 안정화를 위하여 약 1000(V), 300(Torr), 640[Hz]에서 휘도의 최고 값이 측정되며, 그 결과는 FFL을 위한 최적화된 구동 조건으로써 보여 진다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1255-1257
• /
• 1998

In this study,$ 5{\times}5$ dot-matrix display was implemented with powder electroluminescent device (PELD). Generally PELD which have a luminance from powder phosphor with electric field, inserted phosphor and dielectric layer between electrodes is basic structure. To make high brightness PELD compared to conventional device, new type of PELD was proposed as follows. New PELD had only one layer, which was mixed phosphor (ZnS:Cu) and dielectric (BaTiO3) material appropriately between electrodes. To compare and estimate the conventional and new type of PELD, the EL spectrum, transferred charge density, brightness and decay time was measured. As above result, we fabricated a hish brightness $ 5{\times}5$ dot-matrix display with new type of PELD. Its brightness was 6400 $cd/m^2$ at 200 V, 400Hz.