• 한국재료학회지
• /
• 제9권2호
• /
• pp.149-154
• /
• 1999

재래식과 마이크로파 열원으로 알루미나 기판을 PbO-ZnO-$B_2O_3$계 유리로 봉착하였을 때, 봉착용 유리의 결정화 거동 및 알루미나 기판과의 봉착상태를 조사하였다. 재래식 열처리된 시편에 비하여 마이크로파 열처리된 시편은 짧은 시간과 낮은 온도에서 열처리 되었음에도 불구하고 모유리 내에서 $\textrm{PbTiO}_3$ 결정이 잘 성장하였고, 높은 결정화를 보여주었다. 또한, 마이크로파 봉착 시편은 양호한 상태를 보여주었고, 봉착 곡강도는 거의 비슷하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.207-210
• /
• 2017

The suspension arrangement of insulators provides flexibility and assists in power transmission in transmission lines. The performance of the insulator string is strongly influenced by the environmental conditions to which it is exposed, its shape and the inherent material properties of suspension-type insulators. The suspension-type insulators are mostly made from glass, porcelain and ceramic material due to their high resistivity. Irregularity in charge distribution throughout the porcelain insulator may lead to accelerated aging and electrical breakdown. A very high and steep lightning impulse voltage may also cause breakdown of suspension-type insulators. We investigated various material characteristics such as alumina addition, surface morphology, x-ray diffraction pattern and relative density of suspension porcelain insulators manufactured in 1989 (36,000 lbs.), 1995 (36,000 lbs.) and 2001 (36,000 lbs.) by the KRI Company for use in 154 kV high power transmission lines. We compared the material characteristics of these porcelain insulators with that of the top-of-the-line porcelain insulators (36,000 lbs.) manufactured by the NGK Company in 2000. These suspension-type porcelain insulators were exposed to arc and flashover tests to examine their electrical and mechanical strength. It was noted that alumina addition (17 wt.%) for K-2001 was one of the major contributors to the enhancement of the performance of the porcelain insulators and to their ability to withstand very high current generation during the arc test. The porcelain insulators manufactured during 2001 also showed the highest relative density of 95.8% as compared to the other insulators manufactured in 1989 and 1995 respectively 94.2% and 91.5%. We also discuss reports of various failure modes of suspension-type porcelain insulators.

• 자원리싸이클링
• /
• 제18권2호
• /
• pp.69-76
• /
• 2009

본 연구에서는 수산화 알루미늄이 다량 포함되어 있는 인조대리석 폐기물을 폐광산지역의 지하수 및 지표수 등에서 검출되는 유해중금속 제거용으로 재활용 가능성을 조사하고자 하였다. 이를 위해 폐기물을 $550^{\circ}C$에서 $1000^{\circ}C$ 온도범위에서 열처리하여 알루미나 분말을 추출하였으며, 이렇게 얻어진 열처리분말에 대해 온도에 따른 상변화를 XRD를 통해 분석하고, 비표면적 측정, SEM 분석 등을 통해 분말의 특성을 조사하고, 중금속인 비소의 흡착특성을 조사하였다 그 결과, 열처리된 알루미나 산화물 분말이 중금속 처리에 효과가 있음을 확인할 수 있었으며, 열처리분말의 구성성분에 영향을 받는다는 것을 알 수 있었다. 또한, 열처리 분말 성형체를 소결한 결과, $1200^{\circ}C$ 이하에서 60% 이상의 높은 기공률을 가진 펠렛을 제조할 수 있었으며, 소결조제인 glass 분말의 첨가에 의해 $900^{\circ}C$의 낮은 소결온도에서도 기공률을 유지하면서 비교적 높은 비소흡착률을 가지는 시편을 제조할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제32권6호
• /
• pp.477-482
• /
• 2019

This study investigated the influence of the viscoelastic property of slag when producing glass fiber, MFS631 with 60% of manganese slag, 30% of steel slag, and 10% of silica stone. To fabricate the MFS631 glass bulk, slag materials were placed in an alumina crucible, melted at $1,550^{\circ}C$ for 2 h, and then annealed at $600^{\circ}C$ for 2 h. It was found that glass is non-crystalline through X-ray diffraction analysis. MFS631 fiber was produced at speed in the range of 100~300 rpm at $1,150^{\circ}C$. The loss modulus (G") and storage modulus (G') of the produced glass fiber were evaluated at high temperatures. G' and G" of MFS631 were greater than $893^{\circ}C$, and the modulus value was 136,860 pa. This is similar to the results of a general E-glass fiber graph. Therefore, it was concluded that its spinnability is similar to that of E-glass fiber; therefore, it can be commercialized.

• 한국결정성장학회지
• /
• 제23권1호
• /
• pp.44-50
• /
• 2013

E-glass 섬유는 항공기, 자동차, 레져기구의 복합재료 보강용으로 가장 널리 사용되는 유리섬유이다. 그러나 최근 E-glass 섬유의 원재료비 상승, 환경문제 및 화학적 저항성과 기계적 특성을 향상시키기 위해 산화붕소 함량을 8 %에서 0(제로)까지 감소시키는(소위 'Boron free E-glass'라고 불리는) 연구가 진행되고 있다. 본 연구에서는 'BF(Boron free E-glass)' 조성의 벌크유리와 섬유유리를 제조하고, 열적특성 및 광학적특성을 평가하였다. 5~10 %의 서로 다른 알루미나 함량을 갖는 배치를 $1550^{\circ}C$에서 2시간 용융하여 'BF(Boron free E-glass)'가 얻어졌고, 81~86 %의 높은 가시광투과율, $4.2{\sim}4.9{\times}10^{-6}/^{\circ}C$의 낮은 열팽창계수, $907{\sim}928^{\circ}C$의 연화점을 갖는 투명하고 맑은 유리가 얻어졌다. 'BF' 섬유 시편에 대한 화학적내구성 시험에 있어서는 알루미나 함량이 높아질수록 더 좋은 침식저항성을 나타냄을 확인할 수 있었다.

• 한국재료학회지
• /
• 제28권12호
• /
• pp.763-768
• /
• 2018

In this study, glass fibers are fabricated via a continuous spinning process using manganese slag, steel slag, and silica stone. To fabricate the glass fibers, raw materials are put into an alumina crucible, melted at $1550^{\circ}C$ for 2 hrs, and then annealed at $600^{\circ}C$ for 2 hrs. We obtain a black colored glass. We identify the non-crystalline nature of the glass using an XRD(x-ray diffractometer) graph. An adaptable temperature for spinning of the bulk marble glass is characterized using a high temperature viscometer. Spinning is carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1109^{\circ}C$ to $1166^{\circ}C$, while the winder speed is in the range of 100rpm to 250rpm. We investigate the various properties of glass fibers. The average diameters of the glass fibers are measured by optical microscope and FE-SEM. The average diameter of the glass fibers is $73{\mu}m$ at 100rpm, $65{\mu}m$ at 150rpm, $55{\mu}m$ at 200rpm, and $45{\mu}m$ at 250rpm. The mechanical properties of the fibers are confirmed using a UTM(Universal materials testing machine). The average tensile strength of the glass fibers is 21MPa at 100rpm, 31MPa at 150rpm, 34MPa at 200rpm, and 45MPa at 250rpm.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.5-10
• /
• 1998

Mullitization in a multicomponent oxide system(alumina-kaolin-quartz-feldspar-talc) was studied as a function of sintering temperature from 1200 to 1500$^{\circ}C$ based upon a quantitative X-ray diffraction analysis. In the present study mullite grew as wiskers and its formation reaction showed characteristic there stages as follows In the first stage(1255-1295$^{\circ}C$) an appreciable mullitization(nucleation) occurred while corun-dum dissolution into glass (increasing glass content ) limited the rate of the reaction. At 1295-1335$^{\circ}C$ (second state) the reaction was significantly enhanced with a considerable glass consumption and with no appreciable change in corundum content. Finally (above 1335$^{\circ}C$) the reaction rate was attenuated re-markably with an apparent decrease in glass consumption rate. The impingement of mullite whiskers by oth-er whiskers and crystals was speculated to cause mullite growth in thickness direction with a slow growth rate resulting in the diminished reaction rate in the final stage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.247-247
• /
• 2009

In this work, Ga-doped ZnO (GZO) thin films for toxic gas sensor application were deposited on low temperature co-fired ceramic (LTCC) substrates, by RF magnetron sputtering method. LTCC is one of promising materials for integration with heater, low cost production and high manufacturing yields than silicon substrate. The LTCC substrates with thickness of $400\;{\mu}m$ were fabricated by laminating 12 greentapes which consist of alumina and glass particle in an organic binder. The GZO thin films deposited on the substrates and were analyzed by X-ray diffraction method (XRD) and field emission scanning electron microscope (FESEM). The films are well crystallized in the hexagonal (wurzite) structure with increasing thickness. The fabricated sensors showed good sensitivity and fast response time to common types of toxic gases (NOx, COx).

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권2호
• /
• pp.17-20
• /
• 2011

Superconducting magnetic energy storage (SMES) has attracted a great deal of interest from the viewpoint of energy saving. The magnet of conduction-cooled high temperature superconducting (HTS) SMES is cooled down by a cryocooler. One of the most important problems to be assured the protection of magnet and cryocooler is breakdown at cryogenic temperature. In this study, we investigated insulation materials such as Kapton, Aluminum Nitride(AIN), Alumina($Al_2O_3$), glass fiber reinforced plastics(GFRP) and vacuum in cryogenic temperature. Also, we analyzed statistically the Weibull distribution of breakdown voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.353-353
• /
• 2008

Carbon nanotubes (CNTs) are attractive for field emitter because of their outstanding electrical, mechanical, and chemical properties. Several applications using CNTs as field emitters have been demonstrated such as field emission display (FED), backlight unit (BLU), and X-ray source. In this study, we fabricated a CNT cathode using transparent ultra-thin CNT film. First, CNT aqueous solution was prepared by ultrasonically dispersing purified single-walled carbon nanotubes (SWCNTs) in deionized water with sodium dodecyl sulfate (SDS). To obtain the CNT film, the CNT solution in a milliliter or even several tens of micro-litters was deposited onto a porous alumina membrane through vacuum filtration process. Thereafter, the alumina membrane was solvated by the 3 M NaOH solution and the floating CNT film was easily transferred to an indium-tin-oxide (ITO) glass substrate of $0.5\times0.5cm^2$ with a film mask. The transmittance of as-prepared ultra-thin CNT films measured by UV-Vis spectrophotometer was 68~97%, depending on the amount of CNTs dispersed in an aqueous solution. Roller activation, which is a essential process to improve the field emission characteristics of CNT films, increased the UV-Vis transmittance up to 93~98%. This study presents SEM morphology of CNT emitters and their field emission properties according to the concentration of CNTs in an aqueous solutions. Since the ultra-thin CNT emitters prepared from the solutions show a high peak current density of field emission comparable to that of the paste-base CNT emitters and do not contain outgassing sources such as organic binders, they are considered to be very promising for small-size-but-high-end applications including X-ray sources and microwave power amplifiers.