• 한국해양학회지:바다
• /
• 제2권1호
• /
• pp.1-7
• /
• 1997

군산 하구역에서 해양학적 환경의 시간적 변화양상을 이해하고 하구언 축조 이후 갑문의 조작에 의한 환경의 변화를 알아보기 위하여 1995년 6월부터 1996년 9월까지 약 500일간 매일 관측을 하였다. 조사대상 항목은 해양환경의 일반적인 조사대상인 영양염, 엽록소, 부유현탁물질 그리고 염분이었으며, 이들 자료를 설명하기 위하여 일차적으로 조석자료를 이용하였고, 또한 보조자료로서 기온, 강우량, 풍속등 기상 자료와 금강 하구언의 담수 방출량과 같은 하구언의 갑문조작 효과도 그 관련성을 조사하였다. 조석 위상에 따른 변화를 조사하기 위하여 1996년 4월에 26시간, 7월에 19시간에 걸쳐 시간별로 연속조사를 병행하였다. 시간별 조사에서 염분의 변화양상은 조위에 비례관계를 보였으며, 부유현탁물질과 엽록소는 창 낙조 사이에서 높은 농도를 보였다. 영양염류는 염분에 반비례하는 경향을 보였다. 500일 연속 관측에서 염분은 당수 방출량과 반비례하며, 엽록소는 봄철에 높은 농도를 보였다. 각 영양염류는 변화양상이 유사하였고, 염분과는 반비례 관계를 나타내었다. 부유현탁물질은 15일 주기인 조석 주기(neap-spring tide cycle)와 유사한 양상을 보였으며, 홍수기에는 담수 방출량에 의하여 주로 결정되었다. 금강 하구언의 갑문을 조작하기 이전과 비교해 볼 때 담수의 방출은 우기에 집중되고 있으며, 조류의 감소, 부유물질의 감소, 영양염류와 엽록소의 증가를 보였다.

• The Korean Journal of Ecology
• /
• 제21권5_3호
• /
• pp.649-663
• /
• 1998

The clarify the ecological properties, and to predict change of understory vegetation of mt. Nam Park, population dynamics and interspecific competition of D. smilacinum and D. viridescens, which grow in understory of deciduous broad-leaved forest and pseudo-annuals, were studied from May 20 to May 30 1998. The depth of litter layer, soil moisture content, soil organic matter and soil texture were surveyed in 18 populations (15 D. smilacinum populations and 3 D. viridescens populations). Mean litter layer of d. smilacimum population was thinner than that of D. viridescens populations). Mean litter layer of D. smilacnum population was thinner than that of D. viridescens population. The contents of soil moisture and organic matter of D. smilacinum population were lower than that of D. viridescens population. The D. smilacinum growed in broad range of soil texture but D. viridescens in loamy soil. Because D. smilacinum could tolerate more broad range of soil moisture and soil texture than D. viridescens, the former covered the herb layer in earlier stage and the latter introduced in later stage when rhizome could grow easily. The numbers of individual in two marginal parts were smaller than that in center in same D. smilacinum patch. And the total numbers of individuals grown in (10 ${\times}$ 10)cm were from 0 to 12. The rhizome (subterranean runner) weight, rhizome length, root weight, shoot weight, lea weight and leaf number per subquadrat (cell) increased along the number of individual, that is, increased from marginal part to center. But rhizome weight and rhizome length per individual were vice versa. Therefore, the individuals in marginal part reproduced longer and stronger asexual propagules than that in center. The distribution pattern of D. smilacinum was contageous and that of D. viridescens was random or regular. Therefore, population growth of former was independent on density and that of latter was dependent on density. The distributions of size-class showed normal curves in two population, but the curves based on data of total dry weight showed positive skewness and those of leaf number showed negative skewness The correlation coefficient (CC) values between the properties of each organ were high in two population and significant at 0.1% level. The CC values of D. viridescens were higher of the two. Therefore, the former allocated the energy to each organ stable. The rhizome depth of d. viridescens was 2 times deeper than that of D. smilacinum. And rhizome length and weight of D. viridescens were longer (2 times) or heavier (4 times) than those of D. smilacinum. The patch size of D. viridescens increased 60 cm per year and that of D. smilacinum 30 cm. On this results, the intrinsic increase velocity of d. viridescens patch was 2 times faster than that of d. smilacinum, therefore, on the competition, the former had an advantage over D. smilacinum. The reason why d. viridescens defeated D. smilacinum resulted from that the leaf area of former was 4 times broader than that of latter. in Mt. Nam Park, it was thought that two disporum Population would change with the 3 thpes of environmental change as followings. First, no human impact and increase of soil moisture content resulted in increase of D. viridescens population. Second, mild human impact and similar condition of soil moisture content resulted in slow increase or no changes of D. smilacinum and d. viridescens population. Third, severe human impact and dry condition resulted in decrease or vanishment of two disporum populations.

• 대한토목학회논문집
• /
• 제30권3A호
• /
• pp.211-219
• /
• 2010

고속철도교량의 설계개념은 정적하중에 따른 충격계수를 고려하여 기존 교량 구조물의 강성을 증가시키기 위한 방안을 적용하고 있으며, 전반적인 구조설계 과정은 선진 외국기술에 의존하고 있는 실정이다. 그러나 고속철도(Korea Train eXpress: KTX)의 긴 연장(380 m)과 고속(300 km/h) 주행은 공진현상에 상당한 영향을 미치기 때문에 고속철도교량의 동적증폭계수(DAF) 및 동적성능 평가는 상세한 검토가 필수적으로 수행되어야 할 것이다. 따라서 이 연구에서는 전형적인 PSC 박스 거더 고속철도교량을 대상으로 동적성능을 효율적으로 검토하고자 하며, 합리적인 구조설계를 위한 기초자료를 제시하고자 한다. 이를 위해, 기존문헌을 토대로 KTX의 하중선도를 고려하여 정적해석을 수행하였다. 또한 다양한 해석변수를 고려하여 KTX의 이동하중을 시계열하중으로 변환하였으며, 변환된 시계열하중을 이용하여 시간이력해석을 합리적으로 평가하였다. 이때, 시계열하중을 산정하기 위한 변수는 KTX의 하중재하 절점간격, 시간증분 및 속도변화를 고려하였다. FE해석 결과를 바탕으로 PSC 박스 거더 고속철도교량의 동적성능을 체계적으로 검토하였으며, 국내외 관련규정에 따라 구조안전성을 정량적으로 평가하였다.

• 한국운동역학회지
• /
• 제12권2호
• /
• pp.17-32
• /
• 2002

본 연구는 클럽 샤프트의 대표적인 재질인 그라파이트(graphite)의 유연한(flexible) 클럽 샤프트(club shaft)의 특성에 따라 피험자가 운동학적(kinematics) 요인이 되는 관절의 각변위, 각속도, 각가속도, 클럽헤드의 속도와 가속도와 같은 변인들이 어떻게 적응하는지 비교 분석하여 보다 효율적인 드라이버 선택에 도움을 주며 샤프트 특성에 따른 신체관절의 움직임에 대한 자료를 제시하고자 하였다. 고속 카메라 2대의 속도는 500 fps로 하였고 각 regular,stiff, x-stiff, 자신의 클럽을 포함 각 4개의 클럽을 사용하여 각 클럽당 3번씩 촬영하였으며 목표방향에서 20m이상 벗어나는 경우의 촬영은 다시 촬영하였다. 본 연구에서는 디지타이징(digitizing)을 신체 9개 마커는 강체로 가정된 클럽과 신체분절 모델로 정의하였으며 2 대의 카메라(500fps)로부터 얻은 avi화일을 컴퓨터에 저장하고 자료로부터 Butterworth 6th order recursive digital filter를 사용하여 1차 자료를 smoothing 하고 DLT를 이용하여 3차원 좌표를 구성하도록 한다. 좌표값을 얻기 위하여 kwon3d v3.0을 이용하였다. 본 실험은 피험자 스스로 클럽의 특성에 따라 스윙의 속도를 달리 하기 때문에 스윙의 시간이 달라지며 어느 정도 클럽이 강성에 따라 스윙시간이 빨라지는 결과로 나타났다. 이것은 피험자가 샤프트가 강성(stiffness)에 따라 스윙 속도를 빨리 하게 되는 원인이 되는 것으로 생각된다. 어깨의 각변위는 클럽이 regular의 경우 임팩트에서 각속도를 계속 유지하고 있으며 stiff, x-stiff의 경우에는 어깨의 움직임이 임팩트에서 급격하게 감소되는 것을 알 수 있다. 이것은 팔의 동작과 클럽의 힘을 크게 하기 위한 동작으로 생각된다. 어깨 각속도는 클럽이 stiff할수록 각속도가 큰 감속하는 것으로 나타났다. 손목속도는 regular 클럽의 경우 손목의 감속이 늦게 되고 임팩트에서 손목의 감속이 적게 하는 것으로 나타났으며 stiff와 x-stiff의 클럽에서 임팩트 시에 순간적인 감가속으로 인해 클럽의 속도를 증가시키고 있다. 임팩트 시에 손목의 감가속은 클럽헤드의 임팩트 시 속도를 증가시키는 결과를 보였다. 클럽헤드는 regular 클럽이 임팩트전에는 속도 증가가 커지는 결과와 일치된 결과를 보이고 있다.

• 한국염색가공학회지
• /
• 제29권1호
• /
• pp.37-44
• /
• 2017

An issue of major concern in the utilization of laminated composites based epoxy resin is associated with the occurrence of delaminations or interlaminar cracks, which may be related to manufacturing defects or are induced in service by low-velocity impacts. A strong interfacial filament/brittle epoxy resin bonding can, however, be combined with the high fracture toughness of weak interfacial bonding, when the filaments are arranged to have alternate sections of shear stress. To improve this drawback of the epoxy resin, UV-thermal dual curable resin were developed. This paper presents UV-thermal dual curable resin which were prepared using epoxy acrylate oligomer, photoinitiators, a thermal-curing agent and thermoset epoxy resin. The UV curing behaviors and characteristics of UV-thermal dual curable epoxy resin were investigated using Photo-DSC, DMA and FTIR-ATR spectroscopy. The mechanical properties of UV-thermal dual curable epoxy resin impregnated CF prepreg by UV curable resin content were measured with Tensile, Flextural, ILSS and Sharpy impact test. The obtained results showed that UV curable resin content improves the epoxy toughness.

• 농업과학연구
• /
• 제37권3호
• /
• pp.435-449
• /
• 2010

Soils in the sloping uplands in Korea are subject to intensive land use with high input of agrochemicals and are vulnerable to soil erosion. Development of the environmentally sound land management strategy is essential for a sustainable production system in the sloping upland. This report addresses the status of upland agriculture and the best management practices for the uplands toward the sustainable agriculture. More than 60% of Korean lands are forest and only 21% are cultivating paddy and upland. Uplands are about 7% of the total lands and about 62% of the uplands are in the slopes higher than 7%. Due to the site-specificity of the upland, many managerial and environmental problems are occurring, such as severe erosion, shallow surface soils with rocky fragments, and loadings of non-point source (NPS) contaminants into the watershed. Based on the field trials, most of the sloping uplands were classified as Suitability Class III-V and the major limiting factor was slope and rock fragments. Due to this, soils were over-applied with N fertilizer, even though N rate was the recommendation. This resulted in decreases in yield, degradation of soil quality and increases in N loading to the leachate. Various case studies drew management practices toward sustainable production systems. The suggested BMP on the managerial, vegetative, and structural options were to practice buffer strips along the edges of fields and streams, winter cover crop, contour and mulching farming, detention weir, diversion drains, grassed waterway, and slope arrangement. With these options, conservation effects such as reductions in raindrop impact, flow velocity, runoff and sediment loss, and rill and gully erosion were observed. The proper management practice is a key element of the conservation of the soil and water in the sloping upland.

• Journal of Korean Neurosurgical Society
• /
• 제59권5호
• /
• pp.425-429
• /
• 2016

Objective : Rod-screw fixation systems are widely used for spinal instrumentation. Although many biomechanical studies on rod-screw systems have been carried out, but the effects of rod contouring on the construct strength is still not very well defined in the literature. This work examines the mechanical impact of straight, $20^{\circ}$ kyphotic, and $20^{\circ}$ lordotic rod contouring on rod-screw fixation systems, by forming a corpectomy model. Methods : The corpectomy groups were prepared using ultra-high molecular weight polyethylene samples. Non-destructive loads were applied during flexion/extension and torsion testing. Spine-loading conditions were simulated by load subjections of 100 N with a velocity of $5mm\;min^{-1}$, to ensure 8.4-Nm moment. For torsional loading, the corpectomy models were subjected to rotational displacement of $0.5^{\circ}\;s^{-1}$ to an end point of $5.0^{\circ}$, in a torsion testing machine. Results : Under both flexion and extension loading conditions the stiffness values for the lordotic rod-screw system were the highest. Under torsional loading conditions, the lordotic rod-screw system exhibited the highest torsional rigidity. Conclusion : We concluded that the lordotic rod-screw system was the most rigid among the systems tested and the risk of rod and screw failure is much higher in the kyphotic rod-screw systems. Further biomechanical studies should be attempted to compare between different rod kyphotic angles to minimize the kyphotic rod failure rate and to offer a more stable and rigid rod-screw construct models for surgical application in the kyphotic vertebrae.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1577-1583
• /
• 2012

횡방향 관통 효율 강화 탄체(PELE)는 기폭장치가 없는 새로운 개념의 발사체이다. PELE 는 배면이 닫혀있는 고밀도 피복과 저밀도 충전재로 구성되어있다. PELE 의 폭발 특성을 연구하기 위해 AUTODYN-3D code 를 이용하여 발사체와 표적체의 모델을 구축하였다. PELE 의 의해 알루미늄-2024 합금 표적체를 천공하는 과정을 시뮬레이션으로 구현하였으며 또한 다양한 내부 충전재에 의해 분산되는 표적체의 파편 특성도 연구하였다. PELE 파편의 유한요소해석은 AUTODYN-3D code 의 추계학적 파괴기준을 사용하여 구현되었다. 내부 충전재의 팽창으로 인해 파편은 속도를 얻으며 횡방향으로 분산된다. 따라서 손상영역의 범위가 증강한다. 관통 및 횡방향 분산 과정에서 생성되는 파편은 내부 충전재의 충격 압력에 따라 그 양과 형태가 다른 것으로 나타났다.

• Advances in aircraft and spacecraft science
• /
• 제7권6호
• /
• pp.537-551
• /
• 2020

Investigation of leading edge impingement cooling for first stage rotor blades in an aero-engine turbine, its effect on rotor temperature and trailing edge wake loss have been undertaken in this study. The rotor is modeled with the nozzle for attaining a more accurate simulation. The rotor blade is hollowed in order for the coolant to move inside. Also, plenum with the 15 jet nozzles are placed in it. The plenum is fed by compressed fresh air at the rotor hub. Engine operational and real condition is exerted as boundary condition. Rotor is inspected in two states: in existence of cooling technique and non-cooling state. Three-dimensional compressible and steady solutions of RANS equations with SST K-ω turbulent model has been performed for this numerical simulation. The results show that leading edge is one of the most critical regions because of stagnation formation in those areas. Another high temperature region is rotor blade tip for existence of tip leakage in this area and jet impingement cooling can effectively cover these regions. The rotation impact of the jet velocity from hub to tip caused a tendency in coolant streamlines to move toward the rotor blade tip. In addition, by discharging used coolant air from the trailing edge and ejecting it to the turbines main flow by means of the slot in trailing edge, which could reduce the trailing edge wake loss and a total decrease in the blade cooling loss penalty.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.500-509
• /
• 2015

The numerical simulation of two-dimensional moving blade row interactions is conducted by CFD means to investigate the interactions between the front and rear propeller in a stratospheric airship contra-rotating open propeller configuration caused by different rotational speeds. The rotational speed is a main factor to affect the propeller Reynolds number which impact the aerodynamic performance of blade rows significantly. This effect works until the Reynolds number reaches a high enough value beyond which the coefficients become independent. Additionally, the interference on the blade row has been revealed by the investigation. The front blade row moves in the induced-velocity field generated by the rear blade row and the aerodynamic coefficients are influenced when the rear blade row has fast RPMs. The rear blade row moving behind the front one is affected directly by the wake and eddies generated by the front blade row. The aerodynamic coefficients reduce when the front blade row has slow RPMs while increase when the front blade row moves faster than itself. But overall, the interference on the front blade row due to the rear blade row is slight and the interference on the rear blade row due to the front blade row is much more significant.