Browse > Article
http://dx.doi.org/10.12989/aas.2020.7.6.537

Numerical simulation and investigation of jet impingement cooling heat transfer for the rotor blade  

Peiravi, Amin (Department of Mechanical & Aerospace Engineering, Malek-Ashtar University of Technology)
Bozorg, Mohsen Agha Seyyed Mirza (Department of Mechanical & Aerospace Engineering, Malek-Ashtar University of Technology)
Mostofizadeh, Alireza (Department of Mechanical & Aerospace Engineering, Malek-Ashtar University of Technology)
Publication Information
Advances in aircraft and spacecraft science / v.7, no.6, 2020 , pp. 537-551 More about this Journal
Abstract
Investigation of leading edge impingement cooling for first stage rotor blades in an aero-engine turbine, its effect on rotor temperature and trailing edge wake loss have been undertaken in this study. The rotor is modeled with the nozzle for attaining a more accurate simulation. The rotor blade is hollowed in order for the coolant to move inside. Also, plenum with the 15 jet nozzles are placed in it. The plenum is fed by compressed fresh air at the rotor hub. Engine operational and real condition is exerted as boundary condition. Rotor is inspected in two states: in existence of cooling technique and non-cooling state. Three-dimensional compressible and steady solutions of RANS equations with SST K-ω turbulent model has been performed for this numerical simulation. The results show that leading edge is one of the most critical regions because of stagnation formation in those areas. Another high temperature region is rotor blade tip for existence of tip leakage in this area and jet impingement cooling can effectively cover these regions. The rotation impact of the jet velocity from hub to tip caused a tendency in coolant streamlines to move toward the rotor blade tip. In addition, by discharging used coolant air from the trailing edge and ejecting it to the turbines main flow by means of the slot in trailing edge, which could reduce the trailing edge wake loss and a total decrease in the blade cooling loss penalty.
Keywords
rotor blade; turbine cooling; jet impingement; heat transfer; CFD simulation; numerical;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Schobeiri, M. (2012), Turbomachinery Flow Physics and Dynamic Performance, Springer, Berlin, Germany.
2 Stevens, J. and Webb, B.W. (1991), "The effect of inclination on local heat transfer under an axisymmetric, free liquid jet", Int. J. Heat Mass Trans., 34(4-5), 1227-1236. https://doi.org/10.1016/0017-9310(91)90031-9.   DOI
3 Tabakoff, W. and Clevenger, W. (1972), "Gas turbine blade heat transfer augmentation by impingement of air jets having various configurations", J. Eng. Power, 94(1), 51-58. https://doi.org/10.1115/1.3445620.   DOI
4 Tu, J., Yeoh, G.H. and Liu, C. (2013), Computational Fluid Dynamics, Butterworth-Heinemann, Amsterdam, The Netherlands.
5 Menter, F.R. (1994), "Two-equation eddy-viscosity turbulence models for engineering applications", AIAA J., 32(8), 1598-1605. https://doi.org/10.2514/3.12149.   DOI
6 Bardina, J., Huang, P. and Coakley, T. (1997), "Turbulence modeling validation", Proceedings of the 28th Fluid Dynamics Conference, Snowmass Village, Colorado, U.S.A., June-July.
7 Bunker, R.S. and Metzger, D.E. (1990), "Local heat transfer in internally cooled turbine airfoil leading edge regions: Part I-impingement cooling without film coolant extraction", J. Turbomachine., 112(3), 451-458. https://doi.org/10.1115/1.2927680.   DOI
8 Chupp, R.E., Helms, H.E., McFadden, P.W. and Brown, T.R. (1969), "Evaluation of internal heat-transfer coefficients for impingement-cooled turbine airfoils", J. Aircraft, 6(3), 203-208. https://doi.org/10.2514/3.44036.   DOI
9 Dong, L.L., Leung, C.W. and Cheung, C.S. (2002), "Heat transfer characteristics of premixed butane/air flame jet impinging on an inclined flat surface", Heat Mass Transfer, 39(1), 19-26. https://doi.org/10.1007/s00231-001-0288-1.   DOI
10 Ekkad, S., Huang, Y. and Han, J.C. (2000), "Impingement heat transfer measurements under an array of inclined jets", J. Thermophys. Heat Tr, 14(2), 286-288. https://doi.org/10.2514/2.6524.   DOI
11 Froessling, N. (1958), "Evaporation, heat transfer, and velocity distribution in two-dimensional and rotationally symmetrical laminar boundary-layer flow", NACA-TM-14, NACA Technical Memorandum, U.S.A.
12 Gau, C. and Chung, C. (1991). "Surface curvature effect on slot-air-jet impingement cooling flow and heat transfer process", J. Heat Trans., 113(4), 858-864. https://doi.org/10.1115/1.2911214.   DOI
13 Goldstein, R.J. and Cho, H.H. (1995), "A review of mass transfer measurements using naphthalene sublimation", Exp. Therm. Fluid Sci., 10(4), 416-434. https://doi.org/10.1016/0894-1777(94)00071-F.   DOI
14 Hwang, J.J. and Cheng, C.S. (2001), "Impingement cooling in triangular ducts using an array of side-entry wall jets", Int. J. Heat Mass Tran., 44(5), 1053-1063. https://doi.org/10.1016/S0017-9310(00)00141-1.   DOI
15 Greitzer, E.M., Tan, C.S. and Graf, M.B. (2007), Internal Flow: Concepts and Applications, Cambridge University Press, Cambridge, U.K.
16 Hong, S.K., Lee, D.H. and Cho, H.H. (2008), "Heat/mass transfer measurement on concave surface in rotating jet impingement", J. Mech. Sci. Technol., 22(10), 1952-1958. https://doi.org/10.1007/s12206-008-0738-5.   DOI
17 Hrycak, P. (1981), "Heat transfer from a row of impinging jets to concave cylindrical surfaces", Int. J. Heat Mass Tran., 24(3), 407-419. https://doi.org/10.1016/0017-9310(81)90048-X.   DOI
18 Ibrahim, M.B., Kochuparambil, B.J., Ekkad, S.V. and Simon, T.W. (2005), "CFD for jet impingement heat transfer with single jets and arrays", Proceedings of the ASME Turbo Expo 2005: Power for Land, Sea, and Air, Reno, Nevada, U.S.A., June.
19 Jia, R., Rokni, M. amd Sunden, B. (2002), "Numerical assessment of different turbulence models for slot jet impinging on flat and concave surfaces", Proceedings of the ASME Turbo Expo2020: Power for Land, Sea, and Air, Amsterdam, The Netherlands, June.
20 Li, H.L., Chiang, H.W.D. and Hsu, C.N. (2011), "Jet impingement and forced convection cooling experimental study in rotating turbine blades", Int. J. Turbo Jet Eng., 28(2), 147-158. https://doi.org/10.1515/tjj.2011.015.   DOI
21 Metzger, D.E. and Rued, K. (1989), "The influence of turbine clearance gap leakage on passage velocity and heat transfer near blade tips: Part I-sink flow effects on blade pressure side", J. Turbomach., 111(3), 284-292. https://doi.org/10.1115/1.3262267.   DOI
22 Saeed, F. (2008), "Numerical simulation of surface heat transfer from an array of hot-air jets", J. Aircraft, 45(2), 700-714. https://doi.org/10.2514/1.33489.   DOI