• 대한금속재료학회지
• /
• 제47권11호
• /
• pp.716-721
• /
• 2009

The major drive for the application of low-temperature plasma treatment in nitrocarburizing of austenitic stainless steels lies in improved surface hardness without degraded corrosion resistance. The low-temperature plasma nitrocarburizing was performed in a gas mixture of $N_{2}$, $H_{2}$, and carbon-containing gas such as $CH_{4}$ at $450^{\circ}C$. The influence of the processing time (5~30 h) and $N_{2}$ gas composition (15~35%) on the surface properties of the nitrocarburized layer was investigated. The resultant nitrocarburized layer was a dual-layer structure, which was comprised of a N-enriched layer (${\gamma}_N$) with a high nitrogen content on top of a C-enriched layer (${\gamma}_C$) with a high carbon content, leading to a significant increase in surface hardness. The surface hardness reached up to about $1050HV_{0.01}$, which is about 4 times higher than that of the untreated sample ($250HV_{0.01}$). The thickness of the hardened layer increased with increasing treatment time and $N_{2}$ gas level in the atmosphere and reached up to about $25{\mu}m$. In addition, the corrosion resistance of the treated samples without containing $Cr_{2}N$ precipitates was enhanced than that of the untreated samples due to a high concentration of N on the surface. However, longer treatment time (25% $N_{2}$, 30 h) and higher $N_{2}$ gas composition (35% $N_{2}$, 20 h) resulted in the formation of $Cr_{2}N$ precipitates in the N-enriched layer, which caused the degradation of corrosion resistance.

• 한국작물학회지
• /
• 제59권2호
• /
• pp.134-138
• /
• 2014

도라지를 수확 후 진공포장, 밀폐포장, 질소가스포장 후 저온과 상온에 100일 동안 저장하면서 저장 50일과 100일에 도라지 경도와 사포닌 함량을 조사한 결과를 요약하면 아래와 같다. 1. 저장온도에 따른 도라지의 경도는 저온저장이 상온저장보다 높게 나타났으며, 저장기간이 길어질수록 도라지의 경도는 낮아졌다. 2. 저장방법에 따른 도라지의 경도는 저장 50일차 지퍼팩을 이용한 밀봉에서 1,765 g으로 가장 높게 나타났으며, 저장온도와 저장방법과의 상호작용에서는 고도의 유의성($P{\leq}0.01$)이 인정되었다. 3. 저장온도에 따른 platycodin D3, polygalacin D, 그리고 deapioplatycodin D의 함량조성이 다르게 나타났다. 4. 저장기간에 따른 platycodin D3와 polygalacin D의 함량은 저장 50일 이후 감소하는 경향을 보였지만, deapioplatycodin D는 저장기간이 길어질수록 증가하는 경향을 보였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.186-189
• /
• 2008

The flex plate, an automotive part which mounts to the automotive engine to transfer torque to transmission, should have considerable hardness and shape accuracy. As a way to produce the flex plate, the hot press forming technology which takes advantages of high formability at elevated temperature, enhanced strength and shape stability was introduced. Therefore, as one of major process parameters the heat treatment condition should be determined to obtain appropriate hardness in the range of manufacturer's specifications. In this study, two heat treatments, austempering and quenching and tempering (QT), were compared as feasible conditions fur the hot press forming of high-carbon tool steel and the hardness and toughness after heat treatments were evaluated. The study showed that both heat treatments resulted in improved hardness but only quenching and tempering showed practicable range of toughness.

• 한국분말재료학회지
• /
• 제16권1호
• /
• pp.56-62
• /
• 2009

The degree of WC decomposition and hardness of thermally sprayed WC-Co coatings are important factors determining the wear resistance of the coatings. In order to minimize the degree of decomposition and to increase hardness, the effects of processing parameters of high velocity oxyfuel(HVOF) spraying on various characteristics of nanostructured WC-12Co coating have been evaluated by an experimental design method. The HVOF sprayed WC-12Co coatings consisted of various carbide phases including WC, $W_2C$ and $W_3Co_3C$, with a much reduced carbon content. The degree of WC decomposition and decarburization was affected by changing barrel length and spray distance. The hardness of WC-Co coatings was strongly related to droplet temperature at substrate, and increased with increasing fuel addition and/or decreasing spray distance. The effective control of processing parameters was discussed in detail for manufacturing a high performance WC-Co coating.

• 한국전기전자재료학회논문지
• /
• 제27권11호
• /
• pp.712-717
• /
• 2014

Glass ceramic has a high mechanical strength and low sintering temperature. So, it can be used as a thick film substrate or a high strength insulator. A series of glass ceramic samples based on MgO-$Al_2O_3-SiO_2-ZrO_2$ (MASZ) were prepared by melting at $1,600^{\circ}C$, roll-quenching and heat treatment at various temperatures from $900^{\circ}C$ to $1,400^{\circ}C$. Dependent on the heat treatment temperature used, glass ceramics with different crystal phases were obtained. Their nucleation behavior, microstructure and mechanical properties were investigated with differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Vicker's hardness testing machine. With increasing the heat treatment temperature of MASZ samples, their hardness and toughness initially increase and then reach the maximum points at $1,300^{\circ}C$, and begin to decrease at above this temperature, which is likely to be due to the softening of glass ceramics. As the content of $ZrO_2$ in MAS glass ceramics increases from 7.0 wt.% to 13 wt.%, Vicker's hardness and fracture toughness increase from $853Kg/mm^2$ to $878Kg/mm^2$ and $1.6MPa{\cdot}m^{1/2}$ to $2.4MPa{\cdot}m^{1/2}$ respectively, which seems to be related with the nucleation of elongated phases like fiber.

• 한국재료학회지
• /
• 제18권11호
• /
• pp.604-609
• /
• 2008

The sintering behavior of zircon with silica was investigated. Zircon with 5 vol% of sedimentation $SiO_2$ resulted in the apparent density of $4.45\;g/cm^3$, the diametral tensile strength of $12.125\;kgf/cm^2$, and the micro Vickers hardness of 1283 HV. The dissociation temperature and mechanical characteristics of the $ZrSiO_4$ were changed with different kinds of $SiO_2$. $SiO_2$ addition prevented dissociation of $ZrSiO_4$. Zircon with 5 vol% of sedimentation $SiO_2$ and with 5 vol% of fused $SiO_2$ resulted in increased diametral tensile strength and increased micro Vickers hardness by suppression of $ZrSiO_4$ dissociation and low temperature liquid $SiO_2$ formation. Zircon with fumed $SiO_2$ and quartz $SiO_2$ resulted in decreased diametral tensile strength and decreased micro Vickers hardness because of cristobalite and quartz phase formation and high temperature liquid $SiO_2$ formation. Zircon with 10 vol% of $SiO_2$ resulted in decreased diametral tensile strength and decreased micro Vickers hardness because of weak particle coupling due to excess formation of liquid $SiO_2$.

• 열처리공학회지
• /
• 제26권2호
• /
• pp.59-65
• /
• 2013

The microstructures and hardness distributions of a large-sized high strength H-sectional steel with both V and Nb were systematically examined. The outer surface of the flange part was composed of martensite and bainite due to faster cooling, and had a high hardness value of approximately 310 Hv. However, the amounts of ferrite and pearlite increased and the hardness decreased with increasing the distance from the outer surface at the flange part, except the inner surface. High hardness value of about 290 Hv was measured at the upper surface of the web part having martensite and bainite. The hardness drastically decreased with increasing the web thickness, and then greatly rose again at the lower surface due to bainite formation caused by fast air cooling. The hardness of the flange part was higher than that of the web part due to the larger amount of low-temperature transformed phases, except for the lower surface of the web part. Nb-rich precipitates of 30 to 50 nm and V-rich precipitates less than 20 nm were observed at both flange and web parts. However, the particle size was smaller at the flange part than the web part, resulting in the higher strength of the flange part.

• 한국환경복원기술학회지
• /
• 제12권2호
• /
• pp.29-39
• /
• 2009

Research was initiated to investigate a vegetation characteristics of the winter season by seeding periods. 3 seeding periods (Mid-December seeding plot, Late January seeding plot and Early March seeding plot) and 3 zones (the top zone, the middle zone and the bottom zone) in each plot were treated with 3 replications on the experimented slope. Data such as vegetation coverage (%), soil hardness (MPa), temperature ($^{\circ}C$) and moisture (%) content were analyzed. The vegetation coverage was high in Early March seeding plot, medium in Mid-December, and low in Late January seeding plot. Early March seeding plot was effective in moisture content, soil hardness, and temperature for the growth of vegetation when compared to Late January seeding plot and Mid-December seeding plot. From the standpoint of coverage ratio of plant species, the coverage of Dianthus sinensis and Albizzia julibrissin were high in the Late January seeding plot whereas the coverage of Lotus corniculatus and Cool-season turfgrass were high in Early March seeding plot. These results indicated that the high vegetation coverage of Dianthus sinensis and Albizzia julibrissin in Early March seeding plot was caused by scarification during winter season. There was no difference observed in plant height regardless of seeding periods except in early surveying time of May and June after seeding. As far as each zone of the plot was concerned, the vegetation coverage was high. in the bottom zone, medium in the middle zone and low in the top zone. The bottom area of the experimented slope was high in moisture content when compared to the middle zone and the top zone.

• 항공우주시스템공학회지
• /
• 제12권5호
• /
• pp.1-7
• /
• 2018

본 연구에서는 전자기-열 연동 모사를 기반으로 한 고주파 유도경화 해석방법을 제안하였다. 고주파 유도가열 해석 시 온도에 따른 재료의 물성치 변화 및 냉각 요소를 고려한 유한요소해석 및 이를 S45C 시편을 이용한 고주파 유도경화 실험결과와 비교하였다. S45C 시편을 마이크로 비커스를 사용하여 경도를 측정하여 경화깊이를 확인하였고 이를 유한요소해석 결과와 비교하였다. 고주파 유도가열 해석결과 온도는 S45C의 A2변태점인 $750^{\circ}C$도 이상 가열되었으며, 급랭 시 $200^{\circ}C$이하였다. 유한요소해석결과와 실험에 의한 경화깊이 차이는 0.2mm 수준인 것을 확인할 수 있었다.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.213-219
• /
• 2011

Recently aspheric lenses are widely used for superpricision optical instruments, such as cellular phone camera modules, digital cameras and optical communication modules. The aspherical lenses are processed using mold core under high temperature compressive forming pressure. It is imperative to develop superhard protective films for the life extension of lens forming mold core. Especially ta-C films with higher $sp^3$ fractions receive attentions for the life extension of lens forming mold and, in turn, the cost reduction of lenses due to their suprior high temperature stability, high hardness and smooth surfaces. In this study ta-C films were processed on WC mold as a function of substrate bias voltage using FVA (Filtered Vacuum Arc) method. The processed films were characterized by Raman spectroscopy and nano-indentation to investigate bonding nature and hardness, respectively. The film with maximun 87% of $sp^3$ fraction was obtained at the substrate bias voltage of -60 V, which was closest to ta-C film. ta-C films showed better high temperature stability by sustaining relatively high fraction of $sp^3$ bonding even after 2,000 glass lens forming applications.