• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2002년도 High Temperature Superconductivity Vol.XII
• /
• pp.42-42
• /
• 2002

• 한국양식학회지
• /
• 제18권4호
• /
• pp.280-286
• /
• 2005

순환여과 사육시스템에서 유동층 여과조의 적정 유동조건을 구명하기 위하여 메디아 유동을($50\%,\;100\%$), 수은($15^{\circ}C,\;25^{\circ}C$) 및 암모니아 부하량(2 mg/L, 5 mg/L) 차이에 따른 암모니아 제거율을 조사하였다. 유동층 여과 시스템은 직경 8.3 cm, 높이는 2.0 m의 원통형으로 상부는 여과재료의 유동 비율의 조절이 용이하며 육안적으로 관찰이 가능한 아크릴관을 이용하였고 하부는 PVC 재질로 제작하였다. 유동층 여과 시스템의 여과 메디아로 직경 0.5$\pm$0.1mm 크기의 모래와 제올라이트 입재를 각각 5.4 L씩 여과조에 넣었다. 유동층 여과조의 암모니아 제거 능력은 암모니아 부하량에 따라 부하량이 적은 2 mg/L 실험구에 비해 부하량이 큰 5 mg/L실험구에서 암모니아 제거 효율이 높았고, 여과 메디아 별로는 제올라이트 메디아가 모래 메디아에 비해 암모니아 제거율이 높았다. 수은에 따른 유동층 여과 시스템의 암모니아제거 능력은 수은이 높은 $25^{\circ}C$ 가 수온이 낮은 $15^{\circ}C$에 비해 암모니아 제거율이 높았으며, 메디아의 유동율에 따른 유동층 여과조의 암모니아 제거율은 유동을 $50\%$가 유동을 $100\%$에 비해 높았다. 이상의 결과로부터 유동층 여과조의 운용조건이 수온 $25^{\circ}C$, 암모니아부하량이 5 mg/L이고 여과메디아의 유동율이 $50\%$일 때, 유동층 여과조의 일간 암모니아 제거량은 $80.6{\~}210.6g/m^3$으로 산정되었다.

• 한국표면공학회지
• /
• 제37권4호
• /
• pp.220-225
• /
• 2004

A new ion beam extraction system is designed using a simple ion mass filter and a micro mass balance and a QMS based detecting system. A quadrupole Mass Filter is used for selective ion beam formation from inductively coupled high density plasma sources with appropriate electrostatic lens and final analyzing QMS. Also a quartz crystal microbalance is set between a QMF and a QMS to measure the etching and polymerization rate of the mass selected ion beam. An inductively coupled plasma was used as a ion/radical source which had an electron temperature of 4-8 eV and electron density of $4${\times}$10^{11}$＃/㎤. A computer interfaced system through 12bit AD-DA board can control the pass ion mass of the qmf by setting RF/DC voltage ratio applied to the quadrupoles so that time modulation of pass ion's mass is possible. So the direct measurements of ion - surface chemistry can be possible in a resolution of $1\AA$/sec based on the qcm's sensitivity. A full set of driving software and hardware setting is successfully carried out to get fundamental plasma information of the ICP source and analysed $Ar^{+}$ beam was detected at the $2^{nd}$ QMS.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.122-122
• /
• 2017

Recently, environmental problems have become an area of growing interests. In-situ monitoring of water quality is fundamental to most environmental applications. The accurate measurement of nitrate concentrations is fundamental to understanding biogeochemistry in aquatic ecosystems. Several studies have reported that one of the most feasible methods to measure nitrate concentration is the use of Ion Selective-electrodes (ISEs). The ISE application to water monitoring has several advantages, such as direct measurement methodology, high sensitivity, wide measurement range, low cost, and portability. However, the ISE methods may yield inconsistent results where there was a difference in temperature between the calibration and measurement solutions, which is associated with the temperature dependence of ionic activity coefficients in solution. In this study, to investigate the potential of using the combination of a temperature sensor and nitrate ISEs for minimizing the effect of temperature on real-time nitrate sensing in natural water, a prototype of on-site water monitoring system was built, mainly consisting of a sensor chamber, an array of 3 ISEs, an waterproof temperature sensor, an automatic sampling system, and an arduino MCU board. The analog signals of ISEs were obtained using the second-order Sallen-key filter for performing voltage following, differential amplification, and low pass filtering. The performance test of the developed water nitrate sensing system was conducted in a monitoring station of drinking water located in Jeongseon, Kangwon. A temperature compensation method based on two-point normalization was proposed, which incorporated the determination of temperature coefficient values using regression equations relating solution temperature and electrode signal determined in our previous studies.

• 전기전자학회논문지
• /
• 제18권1호
• /
• pp.152-158
• /
• 2014

본 연구에서는 저온유동성 성능검사 시스템 구현을 통해 디젤 차량용 통합형 연료히터의 성능을 평가한다. 저온 유동성 시험장치에서 $+20{\sim}-30^{\circ}C$ 온도범위에 따라 분리형과 통합형 연료히터 성능을 비교하고, 필터 전후에 따라 유압과 시동시간, 히터의 소모전력을 측정한다. 이때 다양한 종류의 필터면적을 사용함으로써 통합형 연료히터와 분리형을 비교한 결과 시동 시간이 23% 향상되었고, 저온시동성능은 19% 정도 향상된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2739-2741
• /
• 1999

The rotor position information is needed to control the speed of SRM(Switched Reluctance Motor). The information of the rotor position have been generally acquired by using the encoder or the resolver. Speed sensors, however, occasionally malfunction under the hostile environment such as EMI, dust, high temperature and humidity, etc. There have been many efforts to drive the motor without speed sensors. In this paper, the EKF(Extanded Kalman Filter) theory is proposed to drive the SRM without speed sensors. Proposed method keeps a robust speed estimation performance against the input noise because it includes a noise model of measuring noise within the system. The validity of the proposed method has been examined by simulations.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.72-78
• /
• 2007

A diesel particulate filter causes progressive increase in back pressure of an exhaust system due to the loading of soot particles. To maintain the pressure drop caused by DPF under proper level, a regeneration process is mandatory when excessive loading of soot is detected in the filter. It is a major reason why the relation between the amount of soot and the pressure drop in a DPF becomes crucial. On the other hand, pressure drop varies with not only the soot loading but also conditions of exhaust gas such as mass flow rate. Therefore, the relation among them becomes complicated. Furthermore, the characteristics of heat transfer in a DPF is another crucial parameter in order for the filter to avoid thermal crack during regeneration period. This study presents characteristics of pressure drop under various conditions of soot loading and mass flow rate in catalyzed diesel particulate filter. This study also shows characteristics of heat transfer in DPF when high temperature gas flows into the filter. Experiments reveal that the soot loading and mass flow rate affect characteristics pressure drop independently. Experiments also indicate that the amount of coating material has little influence on pressure drop with changes in soot loading and mass flow rate. However, increased catalyst coating may lead to the improved heat transfer which is efficiency to reduce thermal stress of the filter.

• Tribology and Lubricants
• /
• 제38권4호
• /
• pp.121-127
• /
• 2022

This study presents the development of an integrated oil purification system consisting of moisture removal, oil flushing, and oil filtering devices. In this system, the oil flushing device is combined with a micro-bubble generator. Oil purification is necessary for ensuring the high performance of the lubricant through the efficient removal of contaminants and thus enables good maintenance of mechanical systems. The developed purification system removes moisture, varnish, and solid particles. Moreover, during oil purification, the oil flushing device separates foreign materials and contaminants remaining in the lubricating oil piping or mechanical systems. The microbubble generator, which is combined with the oil flushing device, can separate harmful contaminants, such as sludge, wear particles, and rust, from piping or lubrication systems through the cavitation effect. Moisture is removed using a double high-vacuum chamber, while sludge and varnish are removed via electro-absorption using a high-voltage generator. Additionally, the total maintenance cost of the system is reduced through the use of domestically fabricated cartridge filters composed of glass fiber and cellulose. The heater, which maintains the temperature of the lubricant at 60℃, can process 41,000 L of lubricant simultaneously. Multiple tests confirmed that the proposed integrated purification system exhibits good performance in oil flushing and removal of water and varnish.

• 한국광학회지
• /
• 제17권5호
• /
• pp.480-486
• /
• 2006

일반적으로 모바일 폰용 적외선 차단 필터는 유리기판위에 $300^{\circ}C$ 이상의 고온에서 코팅된다. 본 연구에서는 PMMA(Poly methyl methacrylate)기판에 저온에서 $CeO_2$와 $SiO_2$를 사용하여 적외선 차단 필터를 코팅하였다. 저온 코팅된 필터의 접촉각을 측정하여 박막의 부착상태를 시험하였고, 적외선 차단 필터에 대한 시험 및 설계 결과를 모바일 폰용 광학계 개선에 적용하여 보았다.

• 한국전자파학회지:전자파기술
• /
• 제14권3호
• /
• pp.20-40
• /
• 2003

고온초전도 필터의 무부하 양호도 값(unloaded Q-value)이 매우 높기 때문에, 삽입손실의 증가없이 극수(pole number)를 크게 증가시킨 대역통과 및 저역통과 필터를 제작할 수 있다(현재, 70-pole 대역통과 필터가 개발). 초전도 필터는 급준한 스컷 특성과 차단대역에 대한 양호한 감쇠수준을 얻을 수 있고, 집중상수형 공진기(lumped element resonators)를 사용하거나 지연파(slow wave) 특성을 활용하면 소형화가 가능하다. 다성분계인 산화물(oxide) 고온초전체를 에피택셜 박막 및 대면적(4-인치급) 박막으로 제조함으로서 다양한 구조의 평면형(planar type) 필터 개발뿐만 아니라, 전력처리력(power handling capability)도 향상시킬 수 있게 되었다. 최근에 고온초전도 평면형 필터는 반도체 저잡음 증폭기(GaAs-based LNA), 초소형 냉각기(mini-cooler)와 집적되어 서브-시스템화되었다. 그리고 이동통신 기지국용 수신전치부(receiver front-end) 서브-시스템으로 발전하여 통신시스템의 잡음수준과 인접한 주파수 대역에 의한 전파간섭을 현저히 줄일 수 있고, 동시에 주파수 이용효율의 향상과 통신시스템의 용량증대도 가능케 하고 있다. 본고에서는 고온초전도체 필터의 원리, 종류 및 설계법, 그리고 초전도 필터의 특징과 상품화의 요구사항에 대해 알아보고, 이동통신 기지국 수신 전치부용으로 사용되고 있는 고온초전도 필터 시스템개발과 관련된 연구 및 시장 동향의 특징들을 살펴보고자 한다.