• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.373-379
• /
• 2001

When a train runs into a tunnel at high-speed, aerodynamic drag suddenly increases and the booming noise is generated at the exit of tunnel. The noise shape is very important to reduce the aerodynamic drag in tunnel as well as on open ground, and the micro-pressure wave that is a source of booming noise is dependent on nose shape, especially on area distribution. In this study, the nose shape has been optimized employing the response surface methodology and the axi-symmetric compressible Navier-Stokes equations. The optimal designs have been executed imposing various conditions of the aerodynamic drag and the micro-pressure wave on object functions. The results show that the multi-objective design was successful to decrease micro-pressure wave and aerodynamic drag of trains.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.138-143
• /
• 2004

This paper analyzed harmonics from high speed railway traction to high speed railway substation and provide a reduction method of harmonics using the passive filter. A substation supplies the electric power to a train or can supply the electric power to several trains. According to the number of trains covered by a substation, characteristics of harmonics are investigated. These harmonics affect transformer heating and inductive interference. In order to get rid of the damage from the harmonics, this paper presented minimizing method of harmonics. The proposed method is verified in simulation using the PSCAD/EMTDC.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.469-472
• /
• 2007

Aeroacoustic sound induced from inter-couch spacing is an important contributor to interior noise generation for high speed trains. Especially the open space between mud-flap has significant impact from flow-structure interactions. To understand noise generation mechanism, experiments were performed using the wind tunnel. To find mud-flap parameters for minimal noise generations the various shape of the mud-flap was installed and its effects on the wall-pressure generation were investigated.

• Journal of Korean Society of Steel Construction
• /
• v.8 no.3 s.28
• /
• pp.47-54
• /
• 1996

Recently Sucessive progress in train technic has enabled us to constructed high-speed railways for ourselves. This caused more rapid train more pressure on a track and speedier track break-down. Especially in the construction of high-speed rails for high-speed traveling and safety accurate breaking distance is essential and not only computation of rolling resistance in theory but also verification through real measurement are important in basic material for breaking and starting load caused during the train running. In this study, we measured traveling resistance and calculated traveling resistance formula in the case of the SAEMA-EUL which consists of main part of current passenger trains and frights in this country.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.812-816
• /
• 2015

Recently, various monitoring systems have been proposed to detect interaction performance between trains and infrastructure, as well as, various techniques to improve the accuracy and performance of such inspection equipment in high speeds. Especially, it is important to predict electric noise of high speed trains due to its effect on detection system accuracy. In this paper, we analyze various types of electrical noise in electric vehicles to improve the accuracy of the detection module of the inspection car. In detail, analysis of electric noise of high speed railway is performed as a function of speed based on field tests that were carried out by HEMU-430X (Highspeed Eletric Multiple Unit - 430 km/h eXperiment).

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.374-390
• /
• 2015

This research shows the relationship between the number of trains and the probability of trains with arrival delay and suggests way to estimate the benefits of improved punctuality in a bottleneck section of the Gyeongbu Line. The arrival delays of high-speed and conventional trains were estimated using the train operation data of KORAIL. Linear regression models for the probability of trains with arrival delay by train type are presented in this paper. The probabilities of trains with arrival delay were more affected by the number of conventional trains than by the number of high-speed rail trains. For the empirical analysis, a project for increasing the capacity in the Seoul~Geumcheongu office section was tested. The benefits of the improved punctuality were estimated to be 4.2~4.5 billion Korean won every year. This research has some limitations but it can help evaluate more precisely the feasibility of the project of increasing the capacity in bottleneck sections.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.989-995
• /
• 2010

This paper is focused on a simplified measurement of rail irregularity by some axle-box accelerometers for high-speed rail condition monitoring with in-service high-speed trains. Generally, the rail condition monitoring has been done by a special railway inspection vehicle with a 10m versine method. But, the monitoring method needs some expensive measurement system, and have been performed only at night due to its speed limit. In this research, a simplified measurement of rail irregularity using axle-box accelerometers is proposed to monitor the rail condition with in-service high-speed trains. The acceleration is measured by using two accelerometers on a axle-box, and stored in an on-board data acquisition system. The displacement is estimated from the acceleration data by a combination of Kalman filter and the frequency selective filter. The estimated results are compared with the measurement from a laser rail inspection system which is near the axle-box. From the comparison, the proposed method shows promise as a tool for the simplified measurement of rail irregularity at high-speed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.379-387
• /
• 2017

As the average load factor of High-Speed Rail (HSR) trains increased up to 98%, it caused uncomfortable crowdedness in the cabin and deteriorated the level of service to the HSR users. In this paper, we estimated the willingness-to-pay (WTP) of the HSR users for mitigating the crowdedness in the cabin. The contingent valuation method based on the stated preference data was used and the tobit model was applied for the estimation of WTP. It can be concluded that WTP for mitigating the crowdedness in the HSR trains is proportional to the congestion level of train and income level of user. Males, first-class users, not-assigned ticket users, and monthly pass users have relatively higher WTPs, while homemakers, travelers in weekends, commuters and leisure travelers have relatively lower values. The results can provide the fundamental information to estimate the benefits of mitigating crowdedness or the magnitude of governmental subsidy to railway operators for additional introduction of HSR trains.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.229-234
• /
• 2004

When trains run over a snow-covered track at high speed, the snow accereted under car bodies may drop during train running. The dropped snow lumps scatter the ballast on the track damaging the car body and the environment along the track in snowy regions. In this study, various countermeasures to prevent the ballast from scattering has been investigated and compared. Furthermore, the implementation of the ballast-flying prevention methods to passing-by station has been examined through which the KTX train passes about 300km/h speed.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.303-311
• /
• 2002

A first evaluation of the possibilities of high speed trains in conventional railway in Korea have been investigated. The radius of curvature was considered the major problem with high-speed trains in Korea. If KNR(Korea National railway) likes to increase the speed, is then whether KNR shall construct straigthen the track or develop a train that can reduce travel time in curves The research concerns structural design of train car-body is to reduce heavy stress concentration. Using 3D solid modeling, Finite Element analysis and shape optimization combined with powerful postprocessing, graphical display and animation to achieve complete and accurate design and performance will be carried out further project Main purpose of this project is to provide korean tilting train car body's conceptional design. Based on first year research results, the design of car-body will be performed by train manufacture.