• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.780-783
• /
• 2006

The KOrea Multi-Purpose Satellite-2 (KOMPSAT-2) was launched in July 2006 and the main mission of the KOMPSAT-2 is a high resolution imaging for the cartography of Korea peninsula by utilizing Multi Spectral Camera (MSC) images. The camera resolutions are 1 m in panchromatic scene and 4 m in multi-spectral imaging. This paper provides an initial geometric accuracy assessment of the KOMPSAT-2 high resolution image without ground control points and briefly introduces the sensor model of KOMPSAT-2. Also investigated and evaluated the obtained 3-dimensional terrain information using the MSC pass image and scene images acquired from the KOMPSAT-2 satellite.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
• /
• pp.34-39
• /
• 2006

An automated surface-strain measurement system, named ASIAS, was developed by using the image processing and stereo vision techniques in the previous studies by the corresponding author and his coworkers. This system has been upgraded mainly to improve the accuracy through image enhancement, sub-pixel measurement, surface smoothing, etc., since the first version was released. The present study has still more improved the convenience of users as well as the accuracy of measurement by processing high resolution images 8 mega pixels or more which can be easily obtained from a portable digital steal camera. It is proved that high resolution image processing greatly decreases the measurement error and gives strain data without considerable deterioration of accuracy even when the deformed grids to be measured and the master grids for camera calibration are captured together in the same image, making the whole process of strain measurement much simpler.

• 한국산학기술학회논문지
• /
• 제14권1호
• /
• pp.351-357
• /
• 2013

3D 입체 영상을 만들어 내기 위해서는 사람의 오른쪽 눈과 왼쪽 눈의 역할을 하는 양안 카메라가 필요하다. 즉, 왼쪽과 오른쪽 두 대의 카메라로부터 입력되는 영상을 합치는 3차원 영상 처리를 통하여 입체 영상으로 만들어내는 과정을 거치게 된다. 본 논문에서는 HD 해상도를 가지는 스테레오 영상 카메라 구현을 위하여 두 대의 고해상도 줌 카메라로부터 입력되는 영상데이터를 스테레오 영상 포맷으로 변환하는 알고리즘을 FPGA를 통하여 실시간으로 동작하도록 구현하였다. 또한 생성된 스테레오 영상으로부터 좌우 영상간의 물체의 위치 차이를 계산하여 구하는 방법을 제시하였다.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.716-723
• /
• 2014

Vibration measurement using image processing is a fully non-contact measurement method and has many application fields. The resolution of vibration data measured by image processing depends on the camera performance and is lower than that measured by accelerometers. This work discusses the method to increase resolution of vibration signal measured by image processing based on the image mosaic technique with a high-power lens. The working principle of resolution enhancement was explained theoretically and verified by several experiments. It was shown that the proposed method can measure vibrations of relatively large scale structures with increased resolutions.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.307-309
• /
• 2011

최근 출시되는 고사양의 Hand-phone 적용되어진 Camera Module은 대부분 Auto Focusing기능이 탑재되어 있으며 Camera Module의 화소수가 높아지면서 좀 더 정밀하고 안정적인 AF구동제품이 소비자에 의해 요구되고 있다. 본 논문은 현재 출시되고 있는 Camera Module적용 VCM(Actuator)의 문제점인 Auto Focusing시 Lens 초점위치 및 Module 자세에 따른 해상도편차 발생으로 해상도 보증 및 안정된 Actuator 구동을 위해 개선된 구조의 Hybrid VCM을 제안한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.969-970
• /
• 2008

This paper proposes illumination-efficient iris image capturing method. face capture method for extraction of iris pattern with one high resolution camera needs a large scale near infrared illumination. we replace high-resolution camera with co-optic-axial combination between wide view camera and narrow view camera. because this method needs small scale illumination that illuminate only narrow camera viewing angle, we can capture iris pattern image with small scale near infrared illumination.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.391-392
• /
• 1996

We have developed and tested a CCD camera (100 $\times$ 100 pixels) system for observing Ha images of the solar flares with time resolution> 25 msec. The 512 $\times$ 512 pixels image of CCD camera at 2 Mpixels/sec can be recorded at the rate of more than 5 frame/sec while 100 $\times$ 100 pixels area image can be obtained 40 frames/sec. The 100 $\times$ 100 pixels image of CCD camera corresponds to 130 $\times$ 130 arc - $sec^2$ of the solar disk.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.856-859
• /
• 2002

A system for high-resolution analysis of defective elementary cell (R, G or B) on Flat Panel Display (FPD) is described. Based on multiple acquisitions of low-resolution shifted images of the display, our system doesn't require a high-resolution sensor neither tedious alignment of the display, and will remain up to date even facing an important increase of the display dimensions. Our process, highly automated and thus flexible and robust, is expected to perform a full analysis in less than 60s. It is mainly intended for production tests and display classification by manufacturers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.949-952
• /
• 2005

According to the national space program in Korea, is satellites will be launch into space up to 2015. Especially, KARI is going to develope of its own a high resolution camera of less than 1m to be mounted on next Multipurpose Satellite. When performing testing of large spacecraft or hardware that will be launched into orbit, it is necessary to conduct a testing with space-simulated environment. To achieve this requirement, thermal vacuum chamber is generally used. KARI has been developed a very Large Thermal Vacuum Chamber(LTVC) from 2003 to accomodate future space program, such as KOMPSAT, COMS, and Launch vehicles. This new facility will be used to qualify the first self developed High Resolution Camera, which will be loaded on KOMPSAT-3. To perform an optical test for space camera, it is necessary to provide vibration free environment. Thus the vibration responses on the optical table due to external vibration should be minimized by using a special isolation system. In this paper, we propose the concept design of vibration isolation system for the development of the high resolution camera.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.56-63
• /
• 2024

In high radiation fields, gamma cameras suffer from pulse pile-up, resulting in poor energy resolution, count losses, and image distortion. To overcome this problem, various methods have been introduced to reduce the size of the aperture or pixel, reject the pile-up events, and correct the pile-up events, but these technologies have limitations in terms of mechanical design and real-time processing. The purpose of this study is to develop a real-time gamma camera to evaluate the radioactive contamination in high radiation fields. The gamma camera is composed of a pinhole collimator, NaI(Tl) scintillator, position sensitive photomultiplier (PSPMT), signal processing board, and data acquisition (DAQ). The pulse pile-up is corrected in real-time with a field programmable gate array (FPGA) using the start time correction (STC) method. The STC method corrects the amplitude of the pile-up event by correcting the time at the start point of the pile-up event. The performance of the gamma camera was evaluated using a high dose rate ¹³⁷Cs source. For pulse pile-up ratios (PPRs) of 0.45 and 0.30, the energy resolution improved by 61.5 and 20.3%, respectively. In addition, the image artifacts in the ¹³⁷Cs radioisotope image due to pile-up were reduced.