• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.7-12
• /
• 2008

Purpose: To evaluate ultraviolet (UV) blocking characteristics of transparent and tinted ophthalmic lenses. Methods: The transmittance spectra of ophthalmic lenses were measured using the method suggested in ANSI Z80.1 standard. Transmittance percentage were calculated for each lens for UV (200~380 nm; UVA, UVB, UVC) and blue light portions (380~400 nm) of spectrum. Results: The results indicate that transparent plastic lenses with middle, high refractive index and tinted plastic lenses had superior UV blocking characteristics at UV radiation while UV blocker-untreated lenses such as crown glasses and CR39 did not. All except high refractive index lenses and anti-glare night vision lens was not effectively blocked blue light. Conclusions: Crown glass and CR39 lenses need to treat UV blockers to protect eyes from UV. Also, all lenes except high refractive index lenses and anti-glare night vision lens need to treat blue light blockers for protecting from blue light.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2004

Zinc sulfide is a semiconductor with wide band gap and high refractive index and hence promising material to be used as ARC on commercial silicon solar cells. Uniform deposition of zinc sulfide (ZnS) by using chemical bath deposition (CBD) method over a large area of silicon surface is an emerging field of research because ZnS film can be used as a low cost antireflection coating (ARC). The main problem of the CBD bath process is the huge amount of precipitation that occurs during heterogeneous reaction leading to hamper the rate of deposition as well as uniformity and chemical stoichiometry of deposited film. Molar concentration of thiorea plays an important role in varying the percentage of reflectance and refractive index of as-deposited CBD ZnS film. Desirable rate of film deposition (19.6 ${\AA}$ / min), film uniformity (Std. dev. < 1.8), high value of refractive index (2.35), low reflectance (0.655) have been achieved with proper optimization of ZnS bath. Decrease in refractive index of CBD ZnS film due to high temperature treatment in air ambiance has been pointed out in this paper. Solar cells of conversion efficiency 13.8 ％ have been successfully achieved with a large area (103 mm ${\times}$ 103 mm) mono-crystalline silicon wafers by using CBD ZnS antireflection coating in this modified approach.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4121-4124
• /
• 2015

Near infrared blocking function in energy saving window glass is required. The design, deposition and characteristics of optical thin films for reflection of near-infrared light were studied. The optical thin film is designed as laminated film structure with low refractive index film and high index film. Deposition experiments of $SiO_2$ and $TiO_2$ thin films with designed structure using the RF sputtering method were carried out. The characteristics of the thin film with deposition conditions were analyzed. High-refractive-index thin film of $TiO_2$/low refractive-index thin film of $SiO_2$ and high-refractive-index thin film of $TiO_2$ structure for reflection of near-infrared light was designed to be simulated. Results of simulation showed reflectance of 30% or more in the range from 930nm to 1682nm. Triple layer thin films fabricated with simulated results showed wavelength bands from 930nm to 1525nm for the reflectance of 33% or more.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.51-60
• /
• 2020

This study was carried out to get the optimum conditions for manufacturing high refractive glass beads from waste fluorescent lamp glass. Chemical composition, X-ray diffraction pattern, particle size distribution, refractive index of glass beads, and the effect of air mixing ratio and ejection rate were investigated. The obtained results are as follows. The X-ray diffraction pattern and chemical composition of glass beads made of waste fluorescent glass are similar to common glass except ReO₂ 0.0108 wt%, BaO 0.071 wt%, NiO 0.0039 wt% and CaO 7.8 wt% but 11.7 wt% of common glass. The glass beads made of waste fluorescent lamp glass have the narrower particle size distribution of and the higher refractive index than the glass beads made of common glass. The optimal conditions of kiln operation for manufacturing glass beads from waste fluorescent lamp glass are 20 m/sec of ejection rate, 1.7 of air mixing ratio, and 940℃ of temperature.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.27-31
• /
• 2002

Quarternary $Li_2O-B_2O_3-Al_2O_3-SiO_2$ glasses were fabricated by the function of $R({\equiv}Li_2Omole%/B_2O_3mole%)$ and $K({\equiv}(Al_2O_3mole%+SiO_2mole%/B_2O_3mole%)$. The structures of these glasses were investigated through refractive index and Vicker's hardness. The refractive index increased as the increase of the polarizability in the glass network. In the region of low $Li_2O$ content, the refractive index increased due to the increase of the polarizability in the glass network but, in the region of high $Li_2O$ content, the rate of increase of the refractive index decreased due to the increase of the molar volume caused by the formation of $BO_3{^-}$ units with relatively high molar volume. And, the refractive index decreased as the increase of $Al_2O_3+SiO_2$ content with the molar volume in the glass network. The increase and decrease of vicker's hardness values for those glasses depended on the fraction of tetrahedral $BO_4$ units and it of triangle $BO_3{^-}$ units with non-bridging oxygen, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2003

Quarternary $Na_2O-B_2O_3-Al_2O_3-SiO_2$ glasses were fabricated by the function of $R({\equiv}Na_2O\;mole%/B_2O_3\;mole%)$ and $K({\equiv}(Al_2O_3\;mole%+SiO_2\;mole%)/B_2O_3mole%)$. The structures of these glasses were investigated through refractive index and vicker's hardness. The refractive index increased as the increase of the polarizability in the glass network. In the region of low $Na_2O$ content, the refractive index increased due to the increase of the polarizability in the glass network, but in the region of high $Na_2O$ content, the rate of increase of the refractive index decreased due to the increase of the molar volume caused by the formation of $BO_3{^-}$ units with relatively high molar volume. And, the refractive index decreased as the increase of $Al_2O_3+SiO_2$ content with the molar volume in the glass network. The increase and decrease of vicker's hardness values for those glasses depended on the fraction of tetrahedral $BO_4$ units and it of triangle $BO_3{^-}$ units with non-bridging oxygen, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1747-1754
• /
• 2013

We evaluate the impact of near work has on myopia and how they differ across generation. The study subjects were 201(83 males and 118 females) adults who live in Cheongju and Daejeon. Myopia was defined as more than or equal to (-)2.50D. The subjects were divided myopic and control group. The surveys and eye tests that are related to near work and refractive error were conducted and the relationship between the degree of myopia and near work was investigated. Then, the groups were divided into people in their 20s and 30s and the comparisons were made again. The survey results showed significant differences between myopic and control groups that depended on: hours spent in school and outdoor activities during high school period, degree of refractive error caused by level of exercises during the junior high school and high school years, refractive error based on the type of high schools, also hours spent in school and outdoor activities. When the same question was done on the group in their 20s and 30s, there was a different outcome in trends between the groups and refractive error depending on whether they exercised. The degree of near work is one of the environmental risk factors that affect myopia and must be considered when studying myopic progression. However, when discussing specific behavioral patterns in relations to myopia prevention, culture and visual environment of a given generation must also be considered.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.460-467
• /
• 2018

Three-dimensional (3D) refractive-index (RI) imaging and quantitative analyses of angiosperm pollen grains are presented. Using optical diffraction tomography, the 3D RI structures of individual angiosperm pollen grains were measured without using labeling or other preparation techniques. Various physical quantities including volume, surface area, exine volume, and sphericity were determined from the measured RI tomograms of pollen grains. Exine skeletons, the distinct internal structures of angiosperm pollen grains, were identified and systematically analyzed.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.1
• /
• pp.67-73
• /
• 2015

Purpose: This study was investigated the relationship between the male and female of near stereoacuity and phoria, and was examined the correlations between near stereoacuity and phoria and refractive error. Methods: Adult 83 (male 36, female 47, mean age $21.09{\pm}1.74$(19~29) years old) target was examined after full correction of refractive error. Near stereoacuity was measured by using Titmus-fly Stereotest(Stereo Optical Co., Inc., Chicago, IL, USA), and RANDOT Stereotest (Stereo Optical Co., Inc., Chicago, IL, USA), phoria was measured by using modified torrington method, at distance 40 cm. Results: In near stereoacuity, male was better good than female, and there was no difference between male and female (p>0.05). In near phoria, female was more higher than male, and there was a significant difference between male and female (p<0.05). Near stereoacuity by Titmus-fly test and Randot test result respectively was $262.17{\pm}562.43$ sec (second of arc) $243.08{\pm}68.04$ sec in esophoria, $148.42{\pm}269.54$ sec, $107.40{\pm}263.74$ sec in orthophoria, $113.94{\pm}152.46$ sec, $79.70{\pm}136.83$ sec in exophoria, there was a no difference between three phoria groups (p>0.05), and was a high correlation between phoria and near stereoacity(r=0.68). In addition, near stereoacuity in the refractive error respectively was $80.00{\pm}571.43$ sec, $68.75{\pm}36.82$ sec in myopia, $133.57{\pm}224.15$ sec, $93.14{\pm}214.95$ sec in hyperopia, $511.20{\pm}855.00$ sec, $511.4{\pm}855.60$ sec, there was a significant difference between three phoria groups (p<0.05). when was classfiied near stersoacuity into degree of refractive error, near stersoacuity was best in emmetropia, and was reduced when refractive error was highest in high degree myopia, and hyperopia. Conclusions: Titmus-fly Stereotest and RANDOT Stereotest result, near stereoacuity of adults, when esophoria and high degree refractive error, was reduced, there was a relationship between near stereoacuity with phoria, and refractive error. In this both stereotests if was bad when near stereoacuity can expect a phoria and refractive error.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.74-75
• /
• 2002

This study investigated the relationship between refractive error and ocular elements in myopic anisometropia and isometropia. 15 visually normal myopic anisometropes (＞1.00 D interocular difference), 14 emmetropes (${\pm}$ 0.50 D), 15 low myopes (＜3.00 D) and 15 high myopes (＞3.00 D) participated in the study. Refractive error was measured by non-cycloplegic subjective refraction. (omitted)