• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.117-124
• /
• 2013

Objective: This paper presents additional considerations related to organization and safety culture extracted from recent human error incidents in Korea, such as station blackout(i.e., SBO) in Kori#1. Background: Safety culture has been already highlighted as a major cause of human errors after 1986 Chernobyl accident. After Fukushima accident in Japan, the public acceptance for nuclear energy has taken its toll. Organizational characteristics and culture became elucidated as a major contributor again. Therefore many nuclear countries are re-evaluating their safety culture, and discussing any preparedness and its improvement. On top of that, there was an SBO in 2012 in the Kori#1. Korean public feels frustrated due to the similar human errors causing to a catastrophe like Fukushima accident. Method: This paper reassesses Japan's incidents, and revisits Korea's recent incidents. It focuses on the analysis of the hazards rather than the causes of human errors, the derivation of countermeasures, and their implementation. The preceding incidents and conclusions from Japanese experience are also re-analyzed. The Fukushima accident was an SBO due to the natural disaster such as earthquakes and a successive tsunami. Unlike the Fukushima accident, the Kori#1 incident itself was simple and restored without any loss and radioactive release. However, the fact that the incident was deliberately concealed led to massive distrust. Moreover, the continued violation of rules and organized concealment of the accident are serious signs of a new distorted type of human errors, blatantly revealing the cultural and fundamental weakness of the current organization. Result: We should learn from Japanese experiences who had taken pride in its safety technology and fairly high confidence in safety culture. Japan's first criticality accident in JCO facility splashed cold water on that confidence. It has turned out to be a typical case revealing the problems in the organization and safety culture. Since Japan has failed to gain lessons and countermeasure, the issue persists to the Fukushima incident. Conclusion: Safety culture is not a specific independent element, which makes it difficult to either evaluate it properly or establish countermeasures from the lessons. It may continue to expose similar human errors such as concealment of incident and manipulation of bad data. Application: Not only will this work establish the course of research for organization and safety culture, but this work will also contribute to the revitalization of Korea's nuclear industry from the disappointment after the export contract to UAE.

• Journal of the Economic Geographical Society of Korea
• /
• v.16 no.3
• /
• pp.423-444
• /
• 2013

Tourism in Thoi Son Islet has been the advanced model for rural tourism in the Mekong Delta region since the 1990s. The continuously rising number of tourists, however, has also created problems that affect sustainable rural development. To understand these problems, this research analyzed how rural tourism has been operated through the methodology of a stakeholder network. After investigating the network among key stakeholders (Ho Chi Minh travel agencies (HCMTAs), local travel agencies (LTAs), and local residents, the result showed that in the current model, HCMTAs and LTAs have played the role of connectors, working as hubs to shift tourists (demand) to match local residents (supply), with the networking being dominated by signed contracts (formal networks). The networks between LTAs and local residents are both formal and informal. Inter- and intra-networks among local residents are dominated by informal networks of established working relationships based on networks of family, friends, and neighbors. Moreover, this research has found that there is no cooperating network among LTAs. Among owners of tourist sites was not also found cooperating network. The primary motivating factor for these stakeholders is price competition; this has led to a disproportionately small share of revenue for local stakeholders, with most tourism revenue going to HCMTAs. Additionally, because of the high competition among local stakeholders, this results in local stakeholders having little or no negotiating power when conducting business with HCMTAs. Meanwhile the Tien Giang Tourism Association is inefficient in fostering cooperation among local stakeholders to increase their negotiating power.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.73-79
• /
• 2008

In order to apply for transparent conductive oxide(TCO), we deposited ZnO thin films on the glass at room temperature by RF magnetron sputtering method. Deposition conditions for high transmittance and low resistivity were optimized in our previous studies. Under the deposition condition with the RF power of 200 W, target to substrate distance of 30 mm and working pressure of 5 mTorr, highly conductive($7.4{\times}10^{-3}{\Omega}cm$) and transparent(over 85%) ZnO films were prepared. Highly oriented ZnO film in the [002] direction were obtained with specifically designed ZnO targets. Systematic study on dependence of deposition parameters on electrical and optical properties of the as-grown ZnO films were mainly investigated in this work. And for application tests using these films as transparent conductive oxide anodes, wet chemical etching behaviors of ZnO films were also investigated using various chemicals. Wet-chemical etching behavior of ZnO films were investigated using various acid solutions. The concentrations of these different acid solutions were controlled to study the etching shapes and etching rate. ZnO films were anisotropically etched at various concentrations and wet etching led to crater-like surface structure. Also we firstly found that the etching rate and etching shapes of ZnO films strongly depended on the etchant concentrations (i.e. pH) and the etching rate is exponentially decreased with increasing pH values regardless of the acid etchants.

• Strategy21
• /
• s.37
• /
• pp.104-143
• /
• 2015

China's new grand strategy, the "One Belt, One Road Initiative" (also Belt Road Initiative, or BRI) has two primary components: Chinese President Xi Jinping announced the "Silk Road Economic Belt" in September 2013 during a visit to Kazakhstan, and the "21^st Century Maritime Silk Route Economic Belt" in a speech to the Indonesian parliament the following month. The BRI is intended to supply China with energy and new markets, and also to integrate the countries of Central Asia, the Association of Southeast Asia Nations (ASEAN), and the Indian Ocean Region - though not Northeast Asia - into the "Chinese Dream". The project will be supported by the Asian Infrastructure Investment Bank (AIIB), due to open in 2016 with 57 founding members from all around the world, and China has already promised US$ 50 billion in seed funding. China's vision includes networks of energy pipelines, railways, sea port facilities and logistics hubs; these will have obvious commercial benefits, but also huge geopolitical significance. China seems to have two distinct aims: externally, to restore its historical sphere of influence; and internally, to cope with income inequalities by creating middle-class jobs through enhanced trade and the broader development of its economy. In South Korea, opinion on the BRI is sharply polarized. Economic and industrial interests, including Korea Railroad Corporation (KORAIL), support South Korean involvement in the BRI and closer economic interactions with China. They see how the BRI fits nicely with President Park Geun-hye's Eurasia Initiative, and anticipate significant commercial benefits for South Korea from better connections to energy-rich Russia and the consumer markets of Europe and Central Asia. They welcome the prospect of reduced trade barriers between China and South Korea, and of improved transport infrastructure, and perceive the political risks as manageable. But some ardently pro-US pundits worry that the political risks of the BRI are too high. They cast doubt on the feasibility of implementing the BRI, and warn that although it has been portrayed primarily in economic terms, it actually reveals a crucial Chinese geopolitical strategy. They are fearful of China's growing regional dominance, and worried that the BRI is ultimately a means to supplant the prevailing US-led regional security structure and restore the Middle Kingdom order, with China as the only power that matters in the region. According to this view, once China has complete control of the regional logistics hubs and sea ports, this will severely limit the autonomy of China's neighbors, including South Korea, who will have to toe the Chinese line, both economically and politically, or risk their own peace and prosperity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.278-284
• /
• 1995

This experiment was performed to characterize the optimum water table level for the grain quality, seed germination and diastic power of barley(var. Olbori) and wheat(var. Grumil). Olbori and Grumil grew in the 550 liter plastic pot that filled with silt loam or sandy loam. During the whole growth period, the underground water level adjusted to be 20, 30, 40, 50 and 70cm. Filled grain ratio and specific gravity were not affected by soil texture and water table. Low level of water table caused the increase of 1,000 grain weight in wheat and barley, but soil texture didn't. Crude protein content tended to be high as the water table level was high, especially in wheat. Change in crude protein content was affected by underground water level more than soil texture. And the affection was slightly higher in sandy loam than silt loam, but the difference was small. The higher level of water table led to the lower crude lipid content in barley and wheat grain. Crude lipid content of both wheat and barley grain grown in sandy loam was higher than those grown in silt loam. As the water table level down, the ash content of barley and wheat grain tend to increase, especially in sandy loam. Wheat flour yield was not affected by soil texture. It was about 65% at 20cm of water level and above 67% at 40cm water level. The seed germination of wheat and barley was more than 95% when the seeds were placed at 2$0^{\circ}C$ for three days. Regardless of soil texture, the lowest germination was seen at 20cm of water table level. And the seed germination rate increased as the underground water level became low. Above 89% of barley grains were germinated within 48 hours except 20cm level of water table in sandy loam. Diastic power of germinated barley was the lowest at 20cm of water table level, and it was almost unchanged below 30cm of water table level. And also it was not affected by soil texture.

• Korean Security Journal
• /
• no.13
• /
• pp.471-485
• /
• 2007

This study is performed to find out what type instructions are produced to players by coaches and what effects are resulted in cooperative spirit of the concerned group. Furthermore the study has its aims at advancing instructors' skills by using finding of it. The study used 'SPSS 11.0 FOR WINDOW - Statistical Package' to analyze the collected samples and dealt with data of 174 individuals. Statistical analysis of the research for hypothesis verification was about frequency, trust level, mutual relationship, variables, and T-verification. The meaningful level for any result was ranged within 95%(p< .05), 99%(p<.01). The finding are as follows. Effects on pleasure, one of elements of team spirits taken by instructor's training style are analyzed as follows. It was proved to be meaningful in relation with a series of activities like training, democratic, social, compensatory aspects and showed also considerable relation with power based behaviors. That says, players are found to enjoy high pleasure when social and bureaucratic behaviors of instructors are very energetic. In addition to that, training, democratic, and compensatory activities didn't show any meaningful effect. Team spirit was found to play a main role between instructor's behaviors and training, democratic, social rewarding activities. Democratic and social acts influence on team spirit. Looking into the detailed aspects, team spirit was resulted very high in the individuals with low democratic mind and was shown high group spirit by groups with high sociable activities. Teamworks was found to be affected by relation between instructor's acts and training, democratic, social and compensatory aspects and it showed meaningful relations with training, social, bureaucratic behaviors. Low degree of training and bureaucratic activities are found to prefer for power team spirit, and high social activities led a strong teamworks. Group binding spirit was influenced by training, democratic, social compensatory, bureaucratic behaviors and it showed to give effects on democratic, social, and bureaucratic activities of instructors. Low degree of democratic and bureaucratic behaviors are found to produce strong team spirit. In contrast with that, strong social activities was found to be motive of powerful team spirit. Value of team spirit was found to play a main role between instructor's behaviors and training, democratic, social, rewarding activities. It didn't show any meaningful effect on behavior of instructors.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.58.1-58.1
• /
• 2010

In solar cell module manufacturing, single solar cells has to be joined electrically to strings. Copper stripes coated with tin-silver-copper alloy are joined on screen printed silver of solar cells which is called busbar. The bus bar collects the electrons generated in solar cell and it is connected to the next cell in the conventional module manufacturing by a metal stringer using conventional hot air or infrared lamp soldering systems. For thin solar cells, both soldering methods have disadvantages, which heats up the whole cell to high temperatures. Because of the different thermal expansion coefficient, mechanical stresses are induced in the solar cell. Recently, the trend of solar cell is toward thinner thickness below 180um and thus the risk of breakage of solar cells is increasing. This has led to the demand for new joining processes with high productivity and reduced error rates. In our project, we have developed a new method to solder solar cells with a laser heating source. The soldering process using diode laser with wavelength of 980nm was examined. The diode laser used has a maximum power of 60W and a scanner system is used to solder dimension of 6" solar cell and the beam travel speed is optimized. For clamping copper stripe to solar cell, zirconia(ZrO)coated iron pin-spring system is used to clamp both joining parts during a scanner system is traveled. The hot plate temperature that solar cell is positioned during lasersoldering process is optimized. Also, conventional solder joints after $180^{\circ}C$ peel tests are compared to the laser soldering methods. Microstructures in welded zone shows that the diffusion zone between solar cell and metal stripes is better formed than inIR soldering method. It is analyzed that the laser solder joints show no damages to the silicon wafer and no cracks beneath the contact. Peel strength between 4N and 5N are measured, with much shorter joining time than IR solder joints and it is shown that the use of laser soldering reduced the degree of bending of solar cell much less than IR soldering.

• Journal of the Economic Geographical Society of Korea
• /
• v.20 no.3
• /
• pp.267-286
• /
• 2017

The main purpose of this paper is to identify the spatiality of North Korea and China border regions through investigating the exceptional characteristics of the regions with the concept of positionality, which allows us to realize the relative position between subject and object. Border regions could be identified appropriately by considering the concept of switching positionality, as it is a kind of multiple space in which its sudden closure and opening should be configured in accordance with geopolitical and geoeconomic changes centering around border line. The main arguments of this research concerned with border regions with the concept of switching positionality are fallen into three. Firstly, changes in border regions should be analyzed by investigating more broader contexts and conjunctural perspectives, and even an internal condition stemmed from locality. Secondly, trajectories of border regions could be analyzed by the assemblages of various powers. Finally, the positionality of economic actors should be examined by identifying dynamic relations between geoeconomics and geopolitics. In particular, the concept of positionality has led to a number of insights into discussions on time-space, and spatiality in relational-dialectical, socio-spatial, and power-topological perspectives. Based upon this concept of positionality, the research has identified exceptional characteristics in North Korea and China border regions. It argues that the exceptionality of the region has stemmed from the intersection between the unstability of geopolitical security and various geoeconomic benefits.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.146-152
• /
• 2016

The purposes of this study were to investigate the effects of professional soldiers' family healthiness on the organizational effectiveness of the military and test for any differences in the structural modeling path caused by the mediating effects of empowerment depending on whether they lived with their families or not. Data were collected with a self-administered survey distributed to 480 professional soldiers after the approval of the Ministry of National Defense. The data collected were then analyzed using descriptive statistics, structural equation modeling, and multi-group analysis. The analysis results show that the family healthiness of all of the professional soldiers had direct or indirect effects on their organizational effectiveness via empowerment and that family healthiness was a variable with a very large explanatory power for organizational effectiveness. Both family healthiness and empowerment had effects on the organizational effectiveness of the solders that were living with their families and those who lived separately from their families. The levels of family healthiness, empowerment, and organizational effectiveness were all high among the professional soldiers that were living with their families and all low among those who were not. Increasing the family healthiness and empowerment was found to enhance the organizational effectiveness in all of the models, and a higher organizational effectiveness would be expected from professional soldiers living with their families. These findings led to a proposal that various plans should be prepared to help professional soldiers live with their families and provide them with family welfare support.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.963-968
• /
• 2009

Liquid crystal (LC; E7 and/or ML-0249)-embedded, poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF-co-HFP)-based, polymer electrolytes were prepared for use in dye-sensitized solar cells (DSSCs). The electrolytes contained 1-methyl-3-propylimidazolium iodide (PMII), tetrabutylammonium iodide (TBAI), and iodine ($I_2$), which participate in the $I_3^-/I^-$ redox couple. The incorporation of photochemically stable PVdF-co-HFP in the DSSCs created a stable polymer electrolyte that resisted leakage and volatilization. DSSCs, with liquid crystal(LC)-embedded PVdF-co-HFP-based polymer electrolytes between the amphiphilic ruthenium dye N719 absorbed to the nanocrystalline $TiO_2$ photoanode and the Pt counter electrode, were fabricated. These DSSCs displayed enhanced redox couple reduction and reduced charge recombination in comparison to that fabricated from the conventional PVdF-co-HFP-based polymer electrolyte. The behavior of the polymer electrolyte was improved by the addition of optimized amounts of plasticizers, such as ethylene carbonate (EC) and propylene carbonate (PC). The significantly increased short-circuit current density ($J_{sc}$, $14.60\;mA/cm^2$) and open-circuit voltage ($V_{oc}$, 0.68 V) of these DSSCs led to a high power conversion efficiency (PCE) of 6.42% and a fill factor of 0.65 under a standard light intensity of $100\;mW/cm^2$ irradiation of AM 1.5 sunlight. A DSSC fabricated by using E7-embedded PVdF-co-HFP-based polymer electrolyte exhibited a maximum incident photon-to-current conversion efficiency (IPCE) of 50%.