• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.374-384
• /
• 2012

Utilizing artificial noise (AN) is a good means to guarantee security against eavesdropping in a multi-inputmulti-output system, where the AN is designed to lie in the null space of the legitimate receiver's channel direction information (CDI). However, imperfect CDI will lead to noise leakage at the legitimate receiver and cause significant loss in the achievable secrecy rate. In this paper, we consider a delayed feedback system, and investigate the impact of delayed CDI on security by using a transmit beamforming and AN scheme. By exploiting the Gauss-Markov fading spectrum to model the feedback delay, we derive a closed-form expression of the upper bound on the secrecy rate loss, where $N_t$ = 2. For a moderate number of antennas where $N_t$ > 2, two special cases, based on the first-order statistics of the noise leakage and large number theory, are explored to approximate the respective upper bounds. In addition, to maintain a constant signal-to-interferenceplus-noise ratio degradation, we analyze the corresponding delay constraint. Furthermore, based on the obtained closed-form expression of the lower bound on the achievable secrecy rate, we investigate an optimal power allocation strategy between the information signal and the AN. The analytical and numerical results obtained based on first-order statistics can be regarded as a good approximation of the capacity that can be achieved at the legitimate receiver with a certain number of antennas, $N_t$. In addition, for a given delay, we show that optimal power allocation is not sensitive to the number of antennas in a high signal-to-noise ratio regime. The simulation results further indicate that the achievable secrecy rate with optimal power allocation can be improved significantly as compared to that with fixed power allocation. In addition, as the delay increases, the ratio of power allocated to the AN should be decreased to reduce the secrecy rate degradation.

• Journal of National Security and Military Science
• /
• s.4
• /
• pp.289-350
• /
• 2006

The world has been rapidly restructured in an agenda of national security from center of military strength to that of economic strength since the post cold-war era China military leadership-division carried out RMA through learning of a lesson from Gulf war in 1990 -1991 and Iraq war in 2003, thus the leadership-division made an attempt to convert the military system to a technical intensive system. The principle based on RMA of China military is (National defense strategy) drafted by the central military committee 1985 and (Four modernization general principles) 1978. China has introduced Russian high-technological arms and equipment in order to build up the military arms greatly thanks to an economical development, and they take pragmatism line as chinese socialism with their strategy to make secure a position as military powers such as they successfully launched a manned spacecraft and are building an air-craft carrie and soon. USA has a theory of dichotomy whether a country is a cooperator for USA, or not. and also enemy or friend since 9.11terror, thus USA is different from their direction of police. This is because USA stands a position as the superpower of the supremacy hegemony of the world. We must be carefully aware that USA considers as important area for Middle east, West south Asia, Central Asia and Northwest Asia to meet the demands of 2lcentury. Accordingly, the focus of USA's military strategy will be probably concentrated at the above mentioned four areas. On the other hand, USA enjoys such a superpower position due to collapse of USSR which was the past main enemy since the post cold war era. We could give an conclusive example as fact that USA has recurred to unilateralism But USA carry on the military operations to the terror groups at global around by converting thje military strike strategy to pre-emptive strike strategy since9.11 terror, 2001. USA seeks for transformation to the mobile military forces with light-quantity oriented in order to carry on such the military operations and makes progress GPR, And the USA forces in Korea makes progress a military renovation as part of such a military strategy. On the other hand, USA promotes the measures of choose for the countries standing at the crossroads of strategy and carries forward a main scheme of provision for four priority aims that the leaders of a hostile country and mis-country shall be prohibited from use and obtainment of weapons of mass destruction. Accordingly, this treatise found out a significant meaning to have an effect on the national security in the korean peninsula.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.272-279
• /
• 1988

Kinetics of ascorbic acid destruction and browning were evaluated by the dynamic test using actual drying data in order to apply in the optimization of food dehydration. Radish was chosen as a test material because it has many typical quality characteristics during drying. Radish was dried in the cabinet dryer with being measured in moisture, food temperature, ascorbic acid and browning. Using moisture and temperature history, proposed kinetic model was integrated and parameters of the model were searched by the iteration scheme to show minimum discrepancy between predicted and experimental data. Ascorbic acid destruction and browning were represented by first and zero order reaction respectively. Arrhenius equation was used to describe temperature dependence. Several mathematical functions of moisture dependence were compared in the model simplicity and residual sum of square. Attained kinetic models were analyzed as functions of temperature and moisture. Rate of ascorbic acid destruction was low at high moisture content, increased with moisture decrease to show a maximum at the moisture of $9{\sim}12g/g$ dry solid, and then decreased up to full dryness. Browning rate increased with moisture decrease to show a sharp maximum at $4{\sim}6g/g$ dry solid and decreased with further moisture decrease.

• World Technopolis Review
• /
• v.8 no.1
• /
• pp.59-70
• /
• 2019

Where is a better place to live? In the coming era, this should be more than simply a livable place. It should be an adaptable place that has a flexible system adaptable to any new situation in terms of diversity. Customization and real-time operation are needed in order to realize this technologically. We expect a smart city to have a flexible system that applies technologies of self-monitoring and self-response, thereby being a promising city model towards being a better place to live. Energy demand and supply is a crucial issue concerning our expectations for the flexible system of a smart city because it is indispensable to comfortable living, especially city living. Although it may seem that energy diversification, such as the energy mix of a country, is a matter of overriding concern, the central point is the scale of place to build grids for realizing sustainable urban energy systems. A traditional hard energy path supported by huge centralized energy systems based on fossil and nuclear fuels on a national scale has already faced difficult problems, particularly in terms of energy flexibility/resilience. On the other hand, an alternative soft energy path consisting of small diversified energy systems based on renewable energy sources on a local scale has limitations regarding stability, variability, and supply potential despite the relatively light economic/technological burden that must be assumed to realize it. As another alternative, we can adopt a holonic path incorporating an alternative soft energy path with a traditional hard energy path complimentarily based on load management. This has a high affinity with the flexible system of a smart city. At a system level, the purpose of all of the paths mentioned above is not energy itself but the service it provides. If the expected energy service is fixed, the conclusive factor in choosing a more appropriate system is accessibility to the energy service. Accessibility refers to reliability and affordability; the former encompasses the level of energy self-sufficiency, and the latter encompasses the extent of energy saving. From this point of view, it seems that the small diversified energy systems of a soft energy path have a clear advantage over the huge centralized energy systems of a hard energy path. However, some insuperable limitations still remain, so it is reasonable to consider both energy systems continuing to coexist in a multiplexing energy system employing a holonic path to create and maintain reliable and affordable access to energy services that cover households'/enterprises' basic energy needs. If this is embodied in a smart city concept, this is nothing else but smart energy inclusion. In Japan, following the Fukushima nuclear accident in 2011, a trend towards small diversified energy systems of a soft energy path intensified in order to realize a nuclear-free society. As a result, the Government of Japan proclaimed in its Fifth Strategic Energy Plan that renewable energy must be the main source of power in Japan by 2050. Accordingly, Sony vowed that all the energy it uses would come from renewable sources by 2040. In this situation, it is expected that smart energy inclusion will be achieved by the Japanese version of a smart grid based on the concept of a minimum cost scheme and demand response.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.321-337
• /
• 1997

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this. Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system, quay handling and transfer system, storage system and inland transport system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows; 1. Among those vessels called at Mokpo Port in 1994, the average size of oceangoing vessels is 4,922.1 G/T, and the domestic is 317.8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165% year called. 2. The capacity of approaching channel is enough to handle the total traffic volume. 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 $\cdots$ No.5 is 4.5% and No.6 1S 30% of 1993's. 5. The utilization rate of LLc(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively. Practical solution and proposal for improvement of Transportation System in Mokpo Port are as follows; 1. To avoid the congestion in domestic pier introduction of a new port operation system is necessary allowing the domestic vessel to use the oceangoing pier. 2. To establish the port management information system to improve the efficiency of port operation. 3. To build a new storage system for high valued cargos including modernization of the present storage and handling system. 4. To insure the safety of navigation in approaching channel, The Vessel Traffic System including separation scheme is introduced. 5. To interest enormously on public relation to ship owner's association, shippers and consignees by showing that they can save cost and ship turnaround time in order to promote the call to Mokpo Port. At last, to be strategically change the function of Mokpo Port to the Leisure, Fishing & Ferry as well as Maritime port.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.1-10
• /
• 2014

In this paper, we propose MPI gridding algorithm of LiDAR data that minimizes the communication between the cores. The LiDAR data collected from aircraft is a 3D spatial information which is used in various applications. Since there are many cases where the LiDAR data has too high resolution than actually required or non-surface information is included in the data, filtering the raw LiDAR data is required. In order to use the filtered data, the interpolation using the data structure to search adjacent locations is conducted to reconstruct the data. Since the processing time of LiDAR data is directly proportional to the size of it, there have been many studies on the high performance parallel processing system using MPI. However, previously proposed methods in parallel approach possess possible performance degradations such as imbalanced data size among cores or communication overhead for resolving boundary condition inconsistency. We conduct empirical experiments to verify the effectiveness of our proposed algorithm. The results show that the total execution time of the proposed method decreased up to 4.2 times than that of the conventional method on heterogeneous clusters.

• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.679-684
• /
• 2005

There are a few representative wireless network access technologies used widely. WWAN is celluar based telecommunication networks supporting high mobility, WLAN ensures high data rate within hotspot coverage, and WDMB support both data and broadcasting services correspondingly. However, these technologies include some limitations especially on the mobility, data rate, transmission direction, and so on. In order to overvome these limitations, there are various studies have been proposed in terms of 'Vortical Handoff' that offers seamless connectivity by switching active connection to the appropriate interface which installed in the mobile devices. In this paper, we propose the interface selection algorithm and network architecture to maximize the life time of entire system by minimizing the unnecessary energy consumption of another interfaces such as WLAN, WDMB that are taken in the user equipment. In addition, by using the results of analyzing multiple types of traffic and managing user buffer as a metric for vertical handoff, we show that the energy efficiency of our scheme is $75\%$ and $34\%$ than typical WLAN for WDMB and WLAN preferred schemes, correspondingly.

• Journal of KIISE
• /
• v.41 no.11
• /
• pp.892-899
• /
• 2014

Dynamic binary instrumentation is a code insertion technique for debugging a program without scattering its execution flow, while the program is running. Most dynamic instrumentations are implemented using dynamic binary translation techniques. Existing studies translated program codes dynamically by parsing the machine code stream to intermediate representation (IR) and then applying compilation techniques for IRs. However, they have high overhead during translation, which is a major cause of difficulty in applying the dynamic binary translation technique to the program which requires high responsiveness. In this paper, we introduce a light-weight dynamic binary instrumentation framework based on a novel dynamic binary translation technique which has low overhead while translating the program code. In order to reduce the translation overhead, our approach adopts a tabular-based address translation and exploits a translation bypassing scheme, which stores the translated address of a frequently called library function in advance. It then accesses the translated address and executes function codes without code translation when calling the function. Our experiment results demonstrated that the proposed approach outperforms the prior dynamic binary translation techniques from 2% up to 65%.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.34-40
• /
• 2004

In this paper, we have studied the OCT(Optical Coherence Tomography) system which has been advantages of high resolution, 2-D cross-sectional images, low cost and small size configuration. The characteristics of light source determine the resolution and coherence length. The light source has a commercial SLD with a central wavelength of 1,285 ill11, 35.3 nm(FWHM). The optical delay line is necessary to make equal with the optical path length to scattered light or reflected light from a sample. In order to make equal the optical path length, the stage that is attached to a reference mirror is controled by a step motor. And the interferometer is configured with the Michelson interferometer by using a single mode fiber, and the scanner can be focused on the sample by using a reference ann Also, the 2-dimension cross-sectional images were measured with scanning the transverse direction of the sample by using a step motor. After detecting the internal signal of lateral direction, a scanner is moved to obtain the cross-sectional image of 2-dimension by using step motor. A photodiode, which has high detection sensitivity and excellent noise characteristics has been used. The detected small signal has a noise and interference. After filtering and amplifying the signal, the output signal is demodulated the waveform And then, a cross-sectional image is seen through converting this signal into a digitalized signal by using an AID converter. The resolution of the sample is about 30${\mu}{\textrm}{m}$, which corresponds to the theoretical resolution. Also, the cross-sectional images of onion cells were measured in real time scheme.

• The Korean Journal of Pesticide Science
• /
• v.2 no.2
• /
• pp.119-125
• /
• 1998

A nation-wide fact-finding survey was done to provide the basic information for establishing the rational weed control scheme in paddy rice. A total of 445 respondents including 273 farmers and 172 pesticide dealers was involved in this survey. Dominant weeds in rice paddy field were Echinochloa crus-galli, Eleocharis kuroguwai, Sagittaria pygmaea, Sagittaria trifolia, etc.. Preferred herbicides widely used by farmners were ranked in the following order; butachlor 5GR, pyrazosulfuron-ethyl + molinate 5.07GR, molinate + cinosulfuron 5.08GR, meanwhile, those recommended by pesticide dealers were; pyrazosulfuron-ethyl + molinate 5.07GR, molinate + cinosulfuron 5.08GR, and butachlor 5GR. The guidelines to choose the preferred herbicides was primarily based on the experience, which was occupied about 45%. Approximately 56% of the farmers followed the recommended herbicide dosage and 43% of them applied the herbicides before weed germination (pre-emergence treatment). In addition, most farmers applied herbicides at least two times with systematic application schedule. Application method of granular formulation was broadcasting by hand, while that of sprayable ones was by high-pressure sprayer. Some farmers answered that they had experienced phytotoxicity in the crop by applied herbicides, of which higher experience was observed from the farmers who applied by high-pressure sprayer. It was analyzed significantly that the feasible herbicides to cause phytotoxicity in rice at farmer's level were butachlor 5GR, esprocarb + pyrazosulfuron-ethyl 5.07GR and bensulfuron-methyl + molinate 5.17 GR.