• Journal of Welding and Joining
• /
• 제15권2호
• /
• pp.72-80
• /
• 1997

The spatter generation rate of GMA welding with $CO_2$ gas shielding was measured with the change of welding conditions such as wire feeding rate and welding voltage and then the results were analized with the accompanying changes in metal transfer mode and in bead geometry. The spatter generation rate (SGR) was relatively low not only wit the short circuit transfer but with the truely globular transfer mode. However, the SGR resulted with the mixed mode were consistantly high. The resultant wave pattern of mixed mode was due to the coexistance of short-circuit and globular transfer and characterized by the frequent appearance of instantaneous short circuit. Considering the result of SGR and that of bead geometry, it could be concluded that when the wire feeding rate (or welding current) was either low or high, the optimum bead shape could be obtained along with the low spatter generation. However, in the middle range of wire feeding rate, the optimum bead shape was only obtained in the mixed mode condition resulting in the high spatter generation.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.43-46
• /
• 2003

The dc reactor type high-Tc superconducting fault current limiter(SFCL) is composed of three parts, a power converter, a magnetic core reactor(MCR) and a dc reactor. This study concerned with the power converter of the DC reactor type high-Tc SFCL. The rectifying devices which power converter of 6.6kV/200A SFCL consists of have to endure high voltage. We propose the dual mode power converter to reduce the voltage which each rectifying device endures. In the single phase the experiment and simulation of dual mode power converter and the simulation of power converter with one bridge rectifier are performed. The current of each system with different power converter has a same tendency and the voltage which rectifying device of dual mode power converter endures is reduced in half by comparison with that of power converter with one bridge rectifier. We found dual mode power converter can be applied to SFCL.

• 한국광학회지
• /
• 제19권3호
• /
• pp.169-174
• /
• 2008

열처리에 의한 광섬유 코어의 모드 확산과 모드 진화 현상을 이용하여 일반 통신용 단일모드 광섬유와 하이텔타(high ${\Delta}$) 광섬유 사이의 접속 손실을 줄일 수 있는 기법들을 제시하였다. 실험결과는 하이텔타 광섬유의 적절한 열처리를 통해 기계적 접속 손실이 2.3 dB에서 0.1 dB까지 감소함을 나타내었다. 반면 융착접속 후 접속 부위에 전기 방전이나 산소 불꽃으로 열을 인가하는 방법으로 $0.2{\sim}0.4dB$ 정도의 접속 손실을 달성하였다.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.262-266
• /
• 2011

In high data-rate communication systems, encryption/decryption must be processed in high speed. In this paper, we implement CCM security mode which is the basis of security. Specifically, we combine CCM with AES block encryption algorithm in hardware. With the combination, we can carry out encryption/decryption as well as data transmission/reception simultaneously without reducing data-rate, and we keep low-power consumption with high speed by optimizing CCM block.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.783-787
• /
• 2014

This paper presents an improved vertical alignment nematic liquid crystal mode characterized by the protrusions or slits of the top substrate and additional stripe type common electrodes with polarity switching of the bottom substrate to improve multi-domain vertically aligned (MVA) and patterned vertically aligned (PVA) nematic modes. MVA and PVA modes have disadvantages such as an LC disclination in the vicinity of the middle region of electrodes between the top and bottom protrusions in MVA mode or the top and bottom slits in PVA mode. Therefore, the stripe type common electrode generating a horizontal electric field and the protrusion or slit producing some pretilt of liquid crystals (LCs) were used to improve the LC disclination, which influences the transmittance and response speed. The simulation results showed that the proposed VA mode has higher transmittance than the MVA and PVA modes. As a result, the proposed VA mode can improve the response speed and transmittance remarkably, which makes it useful for upgrading the LCD display quality.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.339-350
• /
• 2001

To overcome problems in tracking error related to the unmodeled dynamics in the high speed operation of industrial robots, many researchers have used sliding mode control, which is robust against parameter variations and payload changes. However, these algorithms cannot reduce the inherent chattering which is caused by excessive switching inputs around the sliding surface. This study proposes a fuzzy-sliding mode control algorithm to reduce the chattering of the sliding mode control by fuzzy rules within a pre-determined dead zone. Trajectory tracking simulations and experiments show that chattering can be reduced prominently by the fuzzy-sliding mode control algorithm compared to a sliding mode control with two dead zones, and the proposed control algorithm is robust to changes in payload. The proposed control algorithm is implemented to the SCARA (selected compliance articulated robot assembly) robot using a DSP (digital signal processor) for high speed calculations.

• 한국광학회지
• /
• 제32권2호
• /
• pp.55-61
• /
• 2021

850 nm 대역의 발진 파장을 갖는 GaAs/AlGaAs 다중양자우물 레이저 다이오드의 lateral-mode 특성과 이 특성이 출력 광파워 kink에 미치는 영향을 조사하였다. 이를 위해 전기적-열적-광학적 시뮬레이션을 self-consistent하게 수행하고, 제작된 레이저 다이오드 소자들을 측정하였다. 연구 결과를 바탕으로 높은 출력 파워에서도 single lateral-mode를 유지해서 좋은 beam quality를 유지할 수 있는 최적의 P-cladding 두께를 결정하였다.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1199-1203
• /
• 2012

H.264 adopted many compression tools to increase image data compression efficiency such as B frame bi-directional predictions, the direct mode coding and so on. Despite its high compression efficiency, H.264 can suffer from its long coding time due to the complicated tools of H.264. To realize a high performance H.264, several fast algorithms were proposed. One of them is adaptive fast direct mode decision algorithm using mode and Lagrangian cost prediction for B frame in H.264/AVC (MLP) algorithm which can determine the direct coding mode for macroblocks without a complex mode decision process. However, in this algorithm, macroblocks not satisfying the conditions of the MLP algorithm are required to process the complex mode decision calculation, yet suffering a long coding time. To overcome the problem, this paper proposes a fast direct mode prediction algorithm. Simulation results show that the proposed algorithm can determine the direct mode coding without a complex mode decision process for 42% more macroblocks and, this algorithm can reduce coding time by up to 23%, compared with Jin's algorithm. This enables to encode B frames fast with a less quality degradation.

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.233-242
• /
• 2012

The purpose of this study is to analyze the pattern of tenant layout for selected cases of five different Urban Entertainment Center(UEC) in Seoul. This research deals with the process of gaining tenant layout pattern of 40 different types. It is composed of three combination unit with tenants of the same or different consumption mode, which is divided into four different functions of retail, entertainment, dining, and service. Then, every tenant of research cases is classified as one of the fabric type, and the data is analyzed to gain its frequency rate with SPSS 14.0 program. The following is the overall explanation of the result for this research. The frequency of tenant layout pattern between the same consumption mode shows the high rate when compared to the other patterns with different consumption mode. For example, the frequency rate of tenant layout pattern which retail and dining consumption mode are placed side by side like RRR and DDD is high. Interestingly, the frequency rate of RRR type of tenant layout pattern that sells the similar products shows especially high level. It can provide the effective environment for shoppers to compare retail goods in many different stores as producing synergic effects when they are located near each other, so this strategy should be considered when planning tenants in UEC environment. Moreover, in case of dining tenants, when they are clustered together in the UEC environment it can play a role as an anchor tenant. Tenant layout pattern of dining-retail and dining-service consumption mode shows the high frequency rate than other layout pattern with other consumption mode. Besides, entertainment consumption tenants combined with dining or retail tenants show the high frequency rate when compared to the pattern combined with service consumption mode.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.42-48
• /
• 1994

In this paper, a low power and high speed flash Analog-to-Digital Converter using current-mode concept is proposed. Current-mode approach offers a number of advantages over conventional voltage-mode approach, such as lower power consumption small chip area improved accuracy etc. Rescently this concept was applied to algorithmic A/D Converter. But, its conversion speed is limited to medium speed. Consequently this converter is not applicable to the high speed signal processing system. This ADC is fabricated in 1.2um double metal CMOS standard process. This ADC's conversion time is measured to be 7MHz, and power consumption is 2.0mW, and differential nonlinearity is less than 1.14LSB and total harmonic distortion is -50dB. The active area of analog chip is about 350 x 550u$m^2$. The proposed ADC seems suitable for a single chip design of digital signal processing system required high conversion speed, high resolution small chip area and low power consumption.