• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.207-211
• /
• 2001

For the power line communication, we studied its characteristic impedance, noise characteristics, loss characteristics and the coupling circuit between the communication MODEM and power lines. As the results of the experiments, we concluded that the power line impedance in a house varied in the wide range because the electric systems generate the current and voltage hamornic noises.

• Journal of IKEEE
• /
• v.10 no.2 s.19
• /
• pp.116-122
• /
• 2006

We have built a grating-based, high-resolution, spectral line-by-line pulse shaper. By controlling individual spectral lines of a mode-locked laser output, we demonstrate the interesting functionalities of the pulse shaper for arbitrary waveform generation, such as width tunable pulse generation, phase controlled waveform generation, microwave waveform generation, etc.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.89-93
• /
• 2000

Recently many research activities on the diagnosis of stator winding insulation of large rotating machines have been reported. Capacitive couplers are widely used as sensors for on-line partial discharge (PD) measurement of high voltage rotating machines. This paper presents laboratory test to compare Stator Slot Coupler (SSC), Resistance Temperature Detector (RTD), 80 [pF] coupler and 500 [pF] coupler for on-line PD measurement of rotating machines. And a novel on-line monitoring system for an insulation diagnosis is proposed.

• 전기의세계
• /
• v.22 no.6
• /
• pp.24-32
• /
• 1973

When applying capacitors to distribution line, an effort must be made to determine the economic benefits resulting from the installation of a capacitor. There have been many papers and articles published on the economics of capacitors. Most of these are special cases, or have so many qualifications that they are not much use for other cases unless very careful attention is given to minute details. A general economic analysis on a distribution line is very complicated problem. Consequently, a diagram solution is illustrated for determining the economic condenser and applying resonably well for the distribution line with any load division.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.95-98
• /
• 2000

논문에서는, 일반적인 스트립 구조의 결합기가 갖는 문제 즉, 높은 온도에서 나쁜 특성을 보이는 문제점을 극복하고자 Air Line Type의 결합기를 구현하였다. 또한 이 결합기는 24dB이상의 지향성을 가지고 있다. 해석을 위해 짝수 모드와 홀수 모드 해석법을 사용하였고, EM-Simulation으로 확인한 특성과 실제 제작된 20dB, 30dB Cellular 대역(800-900MHz) Air Line 결합기의 결과 특성은 좋은 일치를 보여주고 있다. 또한 최대 장점인 온도 특성은 온도 데이터를 통하여 온도에 강한 특성을 보임을 알 수 있다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.612-615
• /
• 1996

Audible noise from corona discharge had been identified as one of the most important factors in the design of conductor configurations for high-voltage transmission lines. 500kV and above. Therefore this paper describes audible noise characteristics of 6 X 480mm conductor bundle in KEPRI 765kV Test Line and Corona Cage. Prediction formula for audible(corona) noise on a 765kV transmission Line was developed using this results.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.545-552
• /
• 2018

Grounding line is used as evidence of the mass balance showing the vulnerability of Antarctic glaciers and ice shelves. In this research, we utilized a high resolution digital elevation model of glacier surface derived by recently launched satellites to estimate the position of grounding line of Campbell Glacier in East Antarctica. TanDEM-X and TerraSAR-X data in single-pass interferometry mode were acquired on June 21, 2013 and September 10, 2016 and CryoSat-2 radar altimeter data were acquired within 15 days from the acquisition date of TanDEM-X. The datasets were combined to generate a high resolution digital elevation model which was used to estimate the grounding line position. During the 3 years of observation, there weren't any significant changes in grounding line position. Since the average density of ice used in estimating grounding line is not accurately known, the variations of the grounding line was analyzed with respect to the density of ice. There was a spatial difference from the grounding line estimated by DDInSAR whereas the estimated grounding line using the characteristics of the surface of the optical satellite images agreed well when the ice column density was about $880kg/m^3$. Although the reliability of the results depends on the vertical accuracy of the bathymetry in this study, the hydrostatic ice thickness has greater influence on the grounding line estimation.

• Journal of Fashion Business
• /
• v.7 no.6
• /
• pp.85-91
• /
• 2003

Quick Response based Mass-Customization can be produced and distributed customized goods and services on mass basis in apparel e-business. Because consumers cannot touch and feel the apparel products in e-business, they tend to have the negative buying behavior. The purposes of this study were to analyze factors of texture image, and to investigate the differences of consumer sensibility on texture image of apparel products based on different marketing channels (on-line/off-line). Two types of questionnaires for on-line and off-line were used to assess consumer sensibility on apparel fabric. The 8 swatches were selected based on the previous literatures. 202 returned questionnaires for each type (on-line/off-line) were analyzed by t-test, mean and standard deviation with SPSS 10.0. The result of this study was showed that there were partially significant differences on consumer sensibility on texture image of apparel products between on-line and off-line. In case of corduroy, consumers perceived more high-class image under on-line than off-line. In case of taffeta, consumers perceived more thin and dense image under off-line (traditional marketing channel) than on-line (e-commerce). In case of denim, consumers perceived more thin and natural image under off-line than online. In case of organza, consumers perceived more natural image under on-line than off-line. In case of satin, consumers perceived more natural image under on-line than off-line. In case of chiffon, consumers perceived denser image under on-line than off-line. In case of velvet, consumers perceived thinner image, higher-class image, and more natural image of texture sensibility under on-line than off-line. In case of single jersey, consumers perceived higher-class image, and denser image of texture under on-line than off-line.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.595-601
• /
• 2004

The pantograph for Korean High Speed Train was developed and had been evaluating by through 'G7-R&D project' for home grown high speed train technology. In this paper, from the point of view in mechanical aspect, comparison study on the current collection characteristics between the KHST pantograph and contact wire in catenary system on the High-Speed Line and Ho-Nam/Kyoung-Bu conventional lines is conducted. A measuring system for the performance and mechanical characteristics of the KHST pantograph is used for this study, which was developed and installed on the Proto-type Korean High Speed Train, and physical characteristics were measured while the KHST runs on the High-Speed Line and conventional lines. Through this study, remarkable variations of characteristics which can affect to a current collection quality of high-speed train are found and analyzed from measured mean contact forces in both tracks.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.46-55
• /
• 2014

PCB design technology for high-speed transmission line has been developed continuously. Adapting to the high capacity of the communication system, switch fabric interface used for backplane is being standardized to accommodate more than 10Gbps serial interface. In this paper, various computer simulations are performed to compare the performance of each transmission line per length according to PCB material, and also to analyze the effect from via stub length and crosstalk, for the purpose of applying 11.5Gbps serial interface as a switch fabric interface in tera-bit switching system. As a result of the simulation, important design issues, such as PCB material of each board supporting 8dB improvement in transmission loss using low loss PCB, maximum available stub length on transmission line via, whether or not to apply the backdrill process to the via, and the clearance of the differential pair between transmission lines, are determined. The most efficient system architecture which could be applied 11.5Gbps serial interface in all switch fabric interfaces is defined from the simulation results.