• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.53-58
• /
• 2017

Recently, advance in technology have increased the importance of visual inspection in semiconductor inspection areas. In PCB visual inspection, accurate line estimation is critical to the accuracy of the entire process, since it is utilized in preprocessing steps such as calibration and alignment. We propose a line estimation method that is differently weighted for the line candidates using a histogram of gradient information, when the position of the initial approximate corner points is known. Using the obtained line equation of the outline, corner points can be calculated accurately. The proposed method is compared with the existing method in terms of the accuracy of the detected corner points. The proposed method accurately detects corner points even when the existing method fails. For high-resolution frames of 3.5mega-pixels, the proposed method is performed in 89.01ms.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.59-63
• /
• 1999

Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.

• Journal of The Korean Association For Science Education
• /
• v.25 no.2
• /
• pp.122-132
• /
• 2005

Graphing abilities are critical to understand and convey information in science. And then, to what extent are secondary students in science courses able to understand line graphs? To find clues about the students' interpretation processes of the information in science-related line graphs, this study has the following research question: Is there a difference between the levels of complexity of good and poor readers as they use the thinking aloud method for studying cognitive processes? The present study was designed to provide evidence for the hypothesis that good line graph readers use a specific graph interpretation process when reading and interpreting line graphs. With the aid of the thinking aloud method we gained deeper insight into the interpretation processes of good and poor graph readers while verifying verbal statements with respect to line graphs. The high performing students tend to read much more information and more trend-related information than the low performing students. We support the assumption of differential line graph schema existing in the high performing students in conjunction with general graph schema. Also, high performing students tend to think aloud much more metacognitively than low performing students. High performing students think aloud a larger quantity of information from line graphs than low performing students, and more trend-related sentences than value-related sentences from line graphs. The differences of interpretation processes revealed between good and poor graph readers while reading and interpreting line graphs have implications for instructional practice as well as for test development and validation. Teaching students to read and interpret graphs flexibly and skillfully is a particular challenge to anyone seriously concerned with good education for students who live in an technological society.

• Korean Journal of Human Ecology
• /
• v.15 no.5
• /
• pp.811-821
• /
• 2006

The purpose of this report was to study visual effect and functional effect of waist line location of slacks for females in 20'. 1. Differences of visual effect of slacks waist line change to be expressed that mature, sexual and casual slacks waist line were W4 or W5, looks like long leg and mature and formal slacks waist line was W1, slim lower part of the body and flat slacks waist line was W4. 2. Analysis result of functional effect difference with the location variation of slacks waist line were as follows. In all motions(M1, M2, M3, M4) W2 that downed 7cm-6cm-6cm from natural waist line was valued as the most comfortable, W1 and W5 were valued as discomfortable, where waist line was too high or too low.

• Fashion & Textile Research Journal
• /
• v.7 no.5
• /
• pp.501-508
• /
• 2005

The purpose of this study was to investigate the effects of Chinese consumer characteristics as internal inclination on the trust and purchase intention of on-line shopping mall. Two hundred sixty subjects, who were living in Shanghai, China and were university students, were randomly selected for questionnaire. The effective two hundred forty four questionnaires were used to conduct reliability tests for internal consistency and multiple regressions for relationship between independent and dependent variables with SPSS 10.0. The results from this study were as follows. It showed a significant relationship between the on-line shopping experience, consumer innovation, consumer risk and the trust of on-line shopping mall, however, it didn't show any significant relationship between convenience shopping orientation and the trust of on-line shopping mall. Also, It showed a significant relationship between the on-line shopping experience, consumer innovation and the distrust of on-line shopping mall, however, it didn't show any significant relationship between consumer risk, convenience shopping orientation and the distrust of on-line shopping mall. It showed a significant relationship between purchase intension, the consumer risk and on-line shopping experience which appeared a high trust in on-line shopping mall, however, it didn't show any significant relationship between purchase intension and consumer innovation which appeared a high distrust. Therefore, it could be concluded that in China it is decreasing to purchase through the internet shopping mall every year because the group of consumer innovation, which most of internet users in China belong to it, distrusts the internet shopping mall.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.110-121
• /
• 2000

Gas heating, high frequency induction heating and laser heating can be used as the heat-source of line heating. Most of shipyards have been using the gas heating method for line heating. It is difficult to control the residual deformation of gas heating. High frequency induction heating is more feasible for the automation of line heating rather than the gas heating method since it is easy to control the magnitude of heat input. In this study, a numerical model of high frequency induction heating process is proposed for the application of the line heating. The simulation process of the induction heating is composed of the electromagnetic analysis, the heat transfer analysis, and the thermal deformation analysis.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1547-1556
• /
• 2009

In this paper, we propose a flame detection method using region expansions and on-line variances in outdoor infrared video sequences. To segment flame candidates' regions in infrared images, we first, extract initial regions by high threshold values in infrared images and then the segmented regions are expanded to their neighbors with similar high intensity values. The segmented regions could be non-flame areas like bare-grounds and buildings. Therefore, to detect flame regions in the segmented regions, the segmented regions which have high intensity values in infrared image, are tracked using bounding regions in frame sequences. Variances in the tracked regions are calculated effectively by on-line updates to measure intensity variations on the tracked regions. Experiments show that the proposed method, which is based on region expansions and the average of on-line variances in the regions, is efficient to detect flames in infrared image.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.2
• /
• pp.1-24
• /
• 2016

The original fracture criteria developed by Maxey/Kiefner for axial through-wall and surface-cracked pipes have worked well for many industries for a large variety of relatively low strength and toughness materials. However, newer line pipe steels have some unusual characteristics that differ from these older materials. One example is a test data that has demonstrated that X80 line-pipe with an axial through-wall-crack can fail at pressures about 30 percent lower than predicted with commonly used analysis methods for older steels. Thus, it is essential to review the currently available models and investigate the applicability of these models to newer high-strength line pipe materials. In this paper, the available models for predicting the failure behavior of axial-cracked pipes (through-wall-cracked and external surface-cracked pipes) were reviewed. Furthermore, the applicability of these models to high-strength steel pipes was investigated by analyzing limited full-scale pipe fracture initiation test results. Based on the analyzed results, the shortcomings of the available models were identified. For both through-wall and surface cracks, the major shortcomings were related to the characterization of the material toughness, which generally leads to non-conservative predictions in the J-T analyses. The findings in this paper may be limited to the test data that were consider for this study. The requisite characteristics of a potential model were also identified in the present paper.

• Wind and Structures
• /
• v.21 no.2
• /
• pp.241-272
• /
• 2015

In the current study, dynamic and quasi-static analyses were performed to investigate the response of multiple-spanned and single-spanned transmission line conductors under both downburst and synoptic winds considering different wind velocities and different length spans. Two critical downburst configurations, recommended in the literature and expected to cause maximum conductor reactions, were considered in the analyses. The objective of the study was to assess the importance of including the dynamic effect when predicting the conductor's reactions on the towers. This was achieved by calculating the mean, the background and the resonant reaction components, and evaluating the contribution of the resonant component to the peak reaction. The results show that the maximum contribution of the resonant component is generally low (in the order of 6%) for the multiple-spanned system at different wind velocities for both downburst and synoptic winds. For the single-spanned system, the result show a relatively high maximum contribution (in the order of 16%) at low wind velocity and a low maximum contribution (in the order of 6%) at high wind velocity for both downburst and synoptic winds. Such contributions may justify the usage of the quasi-static approach for analyzing transmission line conductors subjected to the high wind velocities typically used for the line design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.510-516
• /
• 2005

In this paper, we discuss parameters of line code and simulate a same optical ethernet having minimum bandwidth(MB810) and non-minimum bandwidth line code(8B/10B) to present the possibility of improving of transmission performance using minimum bandwidth line code on the high speed optical ethernet. We design the high speed optical ethernet using Serial type LAN PHY 10GBASE-E(WDM type LAN PHY 10GBASE-LX4) for the single(multi) channel link. To compare the transmission performance of MB810, 8B/10B line code we measure the bit error rate(BER) according to the received optical power of single and multi channel link.