• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.66-74
• /
• 2016

Concerning the numerical simulation of high-speed water jet with intensive cavitation this paper presents a practical compressible mixture flow method by coupling a simplified estimation of bubble cavitation and a compressible mixture flow computation. The mean flow of two-phase mixture is calculated by URANS for compressible fluid. The intensity of cavitation in a local field is evaluated by the volume fraction of gas phase varying with the mean flow, and the effect of cavitation on the flow turbulence is considered by applying a density correction to the evaluation of eddy viscosity. High-speed submerged water jets issuing from a sheathed sharp-edge orifice nozzle are treated when the cavitation number, ${\sigma}=0.1$, and the computation result is compared with experimental data The result reveals that cavitation occurs initially at the entrance of orifice and bubble cloud develops gradually while flowing downstream along the shear layer. Developed bubble cloud breaks up and then sheds downstream periodically near the sheath exit. The pattern of cavitation cloud shedding evaluated by simulation agrees experimental one, and the possibility to capture the unsteadily shedding of cavitation clouds is demonstrated. The decay of core velocity in cavitating jet is delayed greatly compared to that in no-activation jet, and the effect of the nozzle sheath is demonstrated.

• 설비공학논문집
• /
• 제25권5호
• /
• pp.246-254
• /
• 2013

Some characteristics of nitrogen-water slug flow were optically measured, in vertical acrylic tubes of 2, 5 and 8 mm diameter. Bubble velocity, bubble and unit cell lengths were measured, by analyzing the light intensity signals from two sets of dot laser-infrared sensor modules mounted along the transparent tubes. Optical images of the bubbles were also taken and analyzed, to measure bubble shapes and liquid film thickness. It was found that the measured bubble velocities were in good agreement with the empirical models in the literature, except for those measured under high superficial velocity condition in the 2 mm tube. Bubble length was found to be the longest in the 2 mm tube, being 4 to 5 times those of the other tubes. Liquid film was found to have developed early in the 2 mm tube, which made the blunt shape of the bubble head. Liquid film thickness in the 8 mm tube was measured at almost twice those of the other tubes.

• 한국해양바이오학회지
• /
• 제16권1호
• /
• pp.36-44
• /
• 2024

This study attempted to improve the growth of the freshwater microalgae, Parachlorella kessleri, through the sequential optimization of culture conditions. This attempt aimed to enhance the microalgae's ability to fixate atmospheric CO₂. Culture temperature and light intensity appropriate for microalgal growth were scanned using a high-throughput photobioreactor system. The supplied air flow rate varied from 0.05 to 0.3 vvm, and its effect on the growth rate of P. kessleri was determined. Next, sodium phosphate buffer was added to the culture medium (BG11) to enhance CO₂ fixation by increasing the availability of CO₂(HCO₃^-) in the culture medium. The results indicated that optimal culture temperature and light intensity were 20℃-25℃ and 300 μE/m²/s, respectively. Growth rates of P. kessleri under various air flow rates highly depended on the increase of the culture's flow rate and pH which determines CO₂ availability. Adding sodium phosphate buffer to BG11 to maintain a constant neutral pH (7.0) improved microalgal growth compared to control conditions (BG11 without sodium phosphate). These results indicate that the CO₂ fixation rate in the air could be enhanced via the sequential optimization of microalgal culture conditions.

• 분석과학
• /
• 제15권2호
• /
• pp.108-114
• /
• 2002

고체 시료를 직접 분석하기 위하여 글로우 방전 원자 방출법을 이용한 새로운 장치를 개발하였다. 이 시스템은 기존의 gas-jet boosted nozzle을 개선한 새로운 방전 셀과 Radio-frequency 전원장치를 사용하였다. 기존의 gas-jet boosted nozzle의 경우 재침전이 적고, 시료 손실량이 많아서 낮은 방전 전력에서 저 합금강의 미량 분석에 적합하였다. 하지만 높은 방전 전력을 사용할 경우 시료 손실량이 많아지고, 재석출(redeposition)이 증가함으로 해서 플라스마가 불안정해지는 단점을 지니고 있었다. 기존의 글로우 방전 셀의 경우 방전 전력을 높일 수록 플라스마의 들뜸 온도가 증가하는 경향을 가진다. 이 때문에 높은 방전 전력에서는 플라스마의 온도가 높아져서 극미량 분석이 가능할 수 있지만, 기존의 노즐 부분에 문제점으로 인해 높은 방전 전력으로 분석하기에는 부적합하였다. 이러한 문제점을 modified gas-jet boosted nozzle은 시료 손실량이 같은 방전 전력에서 기존의 가스 제트 흐름노즐에 비하여 감소하지만 높은 방전 전력에서는 플라스마 안정도가 증가하여 극미량 분석이 가능하도록 개선하였다. 본 시스템은 여러 가지 방전에 미치는 실험 변수인 압력과 가스 흐름량 그리고 방전 전력의 변화에 따른 시료 손실 속도와 방출 세기 등의 변화를 측정하여 최적화 하였으며, 표준 시료 Fe합금을 이용하여서 미량 분석을 하였다.

• Journal of Welding and Joining
• /
• 제5권1호
• /
• pp.23-33
• /
• 1987

플라즈마 절단은 산업계에서 널리 사용되고 있으나 공정의 해석에 대한 연구는 매우 부족하다. 본 연구에서는 알미늄판재에 나타나는 온도분포를 해석함으로써 절달폭을 이론적으로 예측하고 자 하였다. 열유동을 해석하는데 있어서, 플라즈마 아아크의 강도가 폭방향으로는 정상분포 (Gaussian distribution)을 갖고 두께방향으로는 지수함수적으로 감소한다고 가정하였다. 측정된 아아크효율을 이용한 계산결과 이론적으로 예측된 절단부의 크기 및 형상이 실험치와 매우 잘 일치하였으며, 따라서 제안된 해석방법은 플라즈마 절달공정의 해석에 유용하게 적용될 수 있 었다.

• 한국분무공학회지
• /
• 제4권3호
• /
• pp.32-41
• /
• 1999

In this research, internal-mixing twin-fluid atomizer using sonic energy is designed and manufactured. We are trying to intimate high efficiency twin-fluid atomizer to obtain good liquid atomization in the low pressure region. Define of geometric form of atomizer, characteristics of spray is influenced by position, depth and height variation of cavity resonator, variation of sound intensity and resonant sound frequency with liquid flow rate. The liquid atomization is promoted by multi-stage disintegration of mixing flow of gas with liquid and the optimum condition of position and depth of cavity resonator according to sonic energy is obtained from the condition at a=2.5mm and L=2mm. The velocity distribution of droplets shows negative value due to recirculation region at the center of axial, and as the radial direction distance is far, the velocity distribution of droplets decrease slowly after having a maximum value. However velocity and SMD show nearly uniform distribution at the down stream and as result compared to Nukiyama and Tanasawa's equation. atomization of mixing flow with air and liquid dispersing from the outlet of the nozzle is promoted by the effect of collision at the cavity resonator.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.318-324
• /
• 2007

We report on a strong violet luminescence emitted from the ZnO:Al films grown on glass substrate by radio-frequency magnetron sputtering. The growth of high-quality thin films and their optical properties are controlled by adjusting the mixture ratio of Ar and $O_2$, which is used as the sputtering gas. The crystallinity of the films is improved as the oxygen flow ratio is decreased, as evidenced in both x-ray diffractometer and atomic force microscope measurements. As for the violet luminescence measured by photoluminescence (PL) spectroscopy, the peak energy and intensity of the PL signal are decreased with increasing the oxygen flow ratio. The peak energy of the violet PL spectrum for the thin film with an oxygen flow ratio of 50 % is almost constant, regardless of the increase of laser Power and temperature. These results indicate that the violet PL signal is probably due to defects related to interstitial Zn atoms.

• 자원ㆍ환경경제연구
• /
• 제18권2호
• /
• pp.279-309
• /
• 2009

산업에서 발생되는 온실가스를 줄이기 위해서는 각 산업별 온실가스 발생량을 정확히 예측해야 한다. 이에 본 연구에서는 2003년 산업연관표와 에너지 사용량 통계자료를 기초로 401개 산업별 직 간접 $CO_2$ 원단위를 산출하고 이를 활용하는 방안을 검토하였다. 본 연구는 국내에 없는 일부 데이터 대신 해외 데이터 사용, 석유정제부문에 대한 분배 문제, 카본뉴트럴 측면에서 재검토 필요성, 폐기물처리 부문 과정의 일부 미고려 등에 따른 결과의 한계를 가지고 있다. 그럼에도 불구하고 부산물로 얻어지는 코크스로가스나 철강계 가스, 자원순환 관점에서 주목받고 있는 폐기물 영향까지를 고려한 401개 상세 산업별 직 간접 $CO_2$ 원단위를 산출했다는 측면에서 의미가 있다. 산업별 $CO_2$ 배출 원단위 분석 결과를 살펴보면, 간접 $CO_2$ 원단위가 크게 나타난 대표적인 산업으로는 조강, 레미콘, 선재 및 궤조, 주철물, 철근 및 봉강 산업이다. 이들 산업은 직접 $CO_2$ 원단위가 큰 산업에서 생산된 원료물질을 이용하여 제품을 생산하고 있다. 직접 $CO_2$ 배출 원단위가 크게 나타난 대표적인 산업으로는 시멘트, 선철, 석회 및 석고 제품, 석탄화합물 등 자연으로부터 채취한 원광석 등을 이용하여 다른 산업에 유용한 원료물질로 정제하는 산업이었다. 본 연구 결과는 산업별 특성이 반영된 저감 목표치 산정, $CO_2$ 저감정책별 감축 잠재량 산정, 기업의 $CO_2$ 배출량 수준 파악 및 저감 목표량을 설정할 때 유용하게 활용될 수 있다. 그 밖에도 국내에서 활발히 연구되고 있는 환경경제통합계정, 산업별 물질흐름분석 분야에서 널리 응용될 수 있을 것이다.

• 한국레이저가공학회지
• /
• 제2권1호
• /
• pp.30-37
• /
• 1999

Laser-welded Tailored Blank is the hottest thing in many automobile companies. But they demand on weld quality, reproducibility, and formability. So it is the great problem of automation of laser welding process. Therefore, it is requested to construct on-line process monitoring system on high accuracy. The light which is emitted from plasma and spatter in laser welding was detected by photo-diodes. It was found that the light intensity depends on welding speed. laser power, and flow rate of assist gas. The relationship between the plasma and spatter and the weld quality can be used for on-line laser weld monitoring systems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.572-583
• /
• 2019

This paper aims to assess the applicability of the Runge Kutta Discontinuous Galerkin-Direct Ghost Fluid Method to the internal explosion inside a water-filled tube, which previously was studied by many researchers in separate works. Once the explosive charge located at the inner center of the water-filled tube explodes, the tube wall is subjected to an extremely high intensity fluid loading and deformed. The deformation causes a modification of the field of fluid flow in the region near the water-structure interface so that has substantial influence on the response of the structure. To connect the structure and the fluid, valid data exchanges along the interface are essential. Classical fluid structure interaction simulations usually employ a matched meshing scheme which discretizes the fluid and structure domains using a single mesh density. The computational cost of fluid structure interaction simulations is usually governed by the structure because the size of time step may be determined by the density of structure mesh. The finer mesh density, the better solution, but more expensive computational cost. To reduce such computational cost, a non-matched meshing scheme which allows for different mesh densities is employed. The coupled numerical approach of this paper has fewer difficulties in the implementation and computation, compared to gas dynamics based approach which requires complicated analytical manipulations. It can also be applied to wider compressible, inviscid fluid flow analyses often found in underwater explosion events.