• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.88-93
• /
• 1998

Since rattling noise, which occur in mechanical linkage with free play or glove boxes in passenger cars, play an important role in the generation of industrial noise and vibration, it is interest to study these dynamics. A difference equations are derived which described the motions of a mass constrained by pre-compressed spring and forced by a high frequency base excitation. Two types of saddle are founded from these difference equations and the stable and unstable manifolds are constructed in these saddle point. For a certain region in a parameter space of exciting displacement and coefficient of restitution, transversal intersections of stable and unstable manifolds exist. Therefore it is founded that there are large families of periodic and irregular non-periodic motions in rattling system i.e. chaos motion is observed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.392-403
• /
• 2013

For the analysis of radiating noise problems in medium-to-high frequency ranges, the Energy Flow Boundary Element Method (EFBEM) was developed. EFBEM is the analysis technique that applies the Boundary Element Method (BEM) to Energy Flow Analysis (EFA). The fundamental solutions representing spherical wave property for radiating noise problems in open field and considering the free surface effect in underwater are developed. Also the directivity factor is developed to express wave's directivity patterns in medium-to-high frequency ranges. Indirect EFBEM by using fundamental solutions and fictitious source was applied to open field and underwater noise problems successfully. Through numerical applications, the acoustic energy density distributions due to vibration of a simple plate model and a sphere model were compared with those of commercial code, and the comparison showed good agreement in the level and pattern of the energy density distributions.

• 한국항공우주학회지
• /
• 제48권1호
• /
• pp.73-79
• /
• 2020

본 논문에서는 고성능 레이다를 위한 저잡음, 고안정 성능을 보유한 새로운 구조의 주파수합성기를 설계 및 제작 하였다. 날로 발전하는 스텔스 기능과 고해상도의 SAR 영상을 확보하기 위해서는 높은 주파수 순도와 초저잡음 특성이 요구되고 있으며, 이를 만족하기 위하여 본 연구에서는 DAS, DDS의 장점을 합성한 새로운 하이브리드 주파수합성기를 개발하였으며, 시험을 통하여 그 성능을 확인하였다. 개발된 주파수 합성기는 X대역에서 10% 이상의 운용대역폭을 보유하고 있으며, 1usec 이하의 빠른 주파수변환속도를 보유하고 있다. 또한, X대역 주파수에서 10kHz 옵셋 주파수에서 -136dBc/Hz의 우수한 위상잡음을 보유하고 있다. 이는 기존 X대역 레이다용 주파수합성기보다 10dB 이상 개선된 성능이다. 또한, 개발된 하이브리드 주파수합성기에서 생성되는 주파수를 이용하여 L대역과 C대역에서도 활용이 가능하며, 추후 국내 AESA 레이다뿐만 아니라 고해상도 SAR레이다 그리고 고성능 지상레이다에 적용하여 성능개선이 가능하다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.465-472
• /
• 2001

This paper describes the characteristics of wind induced noise from high-voltage overhead transmission facilities which include transmission lines. insulator strings. and aviation beacon spheres installed on the overhead ground wires. High-voltage overhead transmission lines generate an audible wind noise due to the alternate shedding of wind-induced vortices. The frequency spectrum from the insulator strings reveals its resonance peak. This resonance sound mechanism has been supposed the self-excitation phenomenon of the resonance and the velocity fluctuation. The booming noises from the aviation beacon spheres are detected and analysed.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.1050-1056
• /
• 1994

When a vibration data for a rotating machine such as a pump or a compressor is concerned, the frequency fluctuation of the energy contents at an instant time may provide useful information on understanding the vibration characteristics of the rotating machinery, rather than the averaged energy distribution along the frequency axis. Especially, when a periodic signal has different spectral contents, the approach to use the averaged frequency distribution, called the normal frequency analysis, may not be appropriate to extract vibration source characteristics of the structure. This paper introduces a way to analyze the signal based on an instant time. In order to evaluate the performance of the various approach, the investigatation compares three different algorithms which are frequently implemented in the instantaneous frequency analysis. Also for the noise effect embodied in the true signal, various cases for different SN ratio have been examined. The result shows that the noise level is crucial to evalute the instantaneous frequency analysis. In order to implement the instantaneous frequency analysis, the extraction of the relevant information from the measured signal should have the high S/N ratio, i, e., 40 dB or above.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권2호
• /
• pp.41-51
• /
• 2014

This paper describes a method to estimate the noise power using the minimum statistics approach, which was originally proposed for audio processing. The proposed minimum statistics-based method separates a noisy image into multiple frequency bands using the three-level discrete wavelet transform. By assuming that the output of the high-pass filter contains both signal detail and noise, the proposed algorithm extracts the region of pure noise from the high frequency band using an appropriate threshold. The region of pure noise, which is free from the signal detail part and the DC component, is well suited for minimum statistics condition, where the noise power can be extracted easily. The proposed algorithm reduces the computational load significantly through the use of a simple processing architecture without iteration with an estimation accuracy greater than 90% for strong noise at 0 to 40dB SNR of the input image. Furthermore, the well restored image can be obtained using the estimated noise power information in parametric image restoration algorithms, such as the classical parametric Wiener or ForWaRD image restoration filters. The experimental results show that the proposed algorithm can estimate the noise power accurately, and is particularly suitable for fast, low-cost image restoration or enhancement applications.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.551-556
• /
• 1997

Based on the experiment for the frequency characteristics and the feedback theory of the impinging-tones, the unstable characteristics of the symmetric mode is analyzed among the various unstable modes of circular impinging jets. There are two different symmetric modes; one is the low-frequency mode S1 due to the vortex at the outside of the jet and the high-frequency mode S2 due to the inside vortex. Each mode has its own characterictics of convection speed decreasing with frequency.

• 소음진동
• /
• 제8권3호
• /
• pp.542-552
• /
• 1998

The noise sources, structure-borne and/or air-borne, in machinery can be defined by their locations and strengths. However the locations of that noise sources are well known in many cases. In those cases, the problem can be defined as an inverse problem to known the strengths of the noise sources in the frequency domain, the modeling scheme is classified by thecoherent or incoherent source. This paper expands the basic concept to the case of the complex noise sources, in which the set of coherent and incoherent noise sources are matched with the noise of a real vehicle. The error factors in the experiment and the optimal number of the monopole sources to match the real suond filed are also investigated. The results of the noise source modeling of heavy machinery show that the incoherent and coherent/incoherent source models are applicable to the high frequency and the low frequency region, respectively. The noise source model also enables the noise source analysis to rank the contribution of real source group such as engine, T/M, exhuast, etc.

• 해양환경안전학회지
• /
• 제29권6호
• /
• pp.620-627
• /
• 2023

선내 소음은 선원의 거주성과 건강을 위한 중요한 요소 중의 하나로, 선내 소음을 줄이기 위한 노력이 활발하게 진행되고 있다. 소음 저감 방법에는 수동소음제어(PNC) 방법과 능동소음제어(ANC) 방법이 있다. 자동차, 항공기와 달리 선박에서는 ANC를 이용한 소음 저감 대책이 미미한 실정이다. 본 연구는 능동소음제어(ANC)와 같이 방음판과 고주파진동원을 이용하여 기관실에 발생한 소음을 줄이고자 하였다. 이를 위해 아크릴 상자를 이용하여 실험 모형을 만들었고, 4가지 조건별로 소음 저감 효과를 측정하였다. 실험 결과는 다음과 같다. 첫째, 방음판은 55 dB ~ 85 dB까지 모든 범위에서 소음 저감 효과가 있었다. 고주파진동원은 낮은 소음에서 효과가 없었으나, 70.8 dB(A)과 85 dB(A)와 같은 높은 소음에서는 효과가 있었다. 둘째, 방음판과 고주파진동원을 동시에 사용하는 경우에는 최대 -2.2 dB(A) 만큼의 소음 저감 효과가 있었다. 본 실험의 결과는 아크릴판으로 제작한 실험모형에서 얻은 결과로 철판으로 된 실제 선박과 다를 수 있다. 추후 연구에서 실제 선박에서 사용하는 철판(재질과 두께, 구조를 고려)을 이용하여 실험하고자 한다. 이 연구가 선박에 승선하는 선원들의 거주성 향상과 건강 증진에 도움이 되기를 기대한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.339-346
• /
• 2015

Aerodynamic flow control phenomena were investigated with a low-current DC surface discharge plasma actuator. The plasma actuator was found to operate in three different discharge modes with similar discharge currents of about 1 mA or less. Stable continuous DC discharge without audible noise was obtained at higher ballast resistances and lower discharge currents. However, even with continuous DC power input, a low-frequency self-pulsed discharge was obtained at lower ballast resistances, and a high-frequency self-pulsed discharge was obtained at higher set-point currents and higher ballast resistances, both with audible noise. The Schlieren image reveals that the low-frequency self-pulsed mode produces a synthetic jet-like flow implying that a gas heating effect plays a role, even though the discharge current is small. The high-frequency self-pulsed mode produces pulsed jets in a tangent direction, and the continuous DC mode produces a steady straight pressure wave. Particle image velocimetry (PIV) images reveal that the induced flow field by the low-frequency self-pulsed mode has flow propagating in the radial direction and centered between the electrodes. The high-frequency self-pulsed mode and continuous DC mode produce flow from the anode to the cathode. The perturbed region downstream of the cathode is larger in the high-frequency self-pulsed mode with similar maximum speeds.