• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.157-162
• /
• 2001

Recently, lots of studies for high flowing concrete have been suggested under practical use that it is only a way to solve the confronted problem. However, most studies have been concentrated on the manufacture method and properties of fresh concrete, but there is few studies for the durability of hardened concrete, specially for the freezing and thawing. Therefore this study is to investigate for the resistance of high-flowing concrete using finely ground granulated furnace blast slag to frost with experimental parameters, such as binder, ratio of replacement of granulated furnace blast slag, superplasticizer, curing method and blain surface area of granulated furnace blast slag.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.141-144
• /
• 1990

In recently, the interest of high strength and flowing concrete, to improve quality and workability of concrete, is gradually increased. In order to make high strength and flowing concrete, many processes may be considered, the water reducing technique using superplasticizer seems to be the most practical, but domestic superplsticizers are not widely used because of economical efficiency, low quality and lack of understanding in construction field. The purpose of this report is to analyze the consumption structure and behavior of domastic acmixtures containing superplasticizer, and to examine about, dessemination of superplasticizer.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.283-289
• /
• 1996

In this paper, the mix design of the super flowing concrete is described with respcet to basic concept, confined water ratio($\beta_p$), volume ratio of water-binder(w/b), volume ratio of fine aggregates($S_r$) and coarse aggregates($G_v$). The primary purposes of this study are to evaluate the effects of cementitious materials(fly ash, slag cement, portland cement), mixing factors ($\beta_p$, w/b, $S_r$, $G_v$)., and to propose the mix design method of the super flowing concrete. As results of this study, confined water ratio($\beta_p$) of cementitious materials is very high (0.99~1.1), and then the ranges of the optimum mixing factors to be satisfied with the super flowing concrete are $S_r$ 47$\ell$ 2%, $G_v$ 52$\ell$ 1%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.303-308
• /
• 2001

Recently, concrete structures have become larger and higher and are demanding high performance concrete with lower heat to prevent thermal cracking, far greater workability, high strength and durability, Application of low heat portland(Type IV) cement for the high performance concrete is the best solution to satisfied those requirements. Here are explained the effect on the properties of high flowing concrete using low heat portland cement by material and mixing variations. Variables for sensitivity test were selected items like finess modulus of aggregates, particle size of limestone powder, unit water, superplasticizer, viscosity agent and concrete temperature. The results of this study were be applied to slurry wall of #215 and #216 of underground LNG tank in Inchon.

• 콘크리트학회논문집
• /
• 제20권2호
• /
• pp.175-183
• /
• 2008

초유동 자기충전 콘크리트 (high flowing self-compacting concrete)는 현재 국내의 경우 건축 구조물에 한정적으로 적용되고 있으며, 토목 구조물의 적용은 찾아보기 어려운 실정이다. 그러나 북미 및 유럽의 경우 유동성 및 재료 분리 저항성이 우수한 초유동 자기충전 콘크리트를 프리캐스트 및 프리스트레스트를 도입한 과밀 배근된 교량 부재에 사용하고 있어 초유동 자기충전 콘크리트를 교량 및 토목구조물 등에 광범위 하게 확대 적용하여 그 활용성을 높여야 할 것으로 판단된다. 따라서 본 연구에서는 토목 구조물인 과밀 배근된 교량 구조물에 초유동 자기충전 콘크리트를 적용하기 위한 방법의 일환으로 고로슬래그 및 플라이애쉬를 2성분계 및 3성분계로 배합하였으며, 과밀 배근된 구조물에 적용할 수 있는 일본토목학회의 JSCE 1등급 규정에 따른 초유동 자기충전 콘크리트의 역학적 특성을 평가하였다. 시험결과 2성분계의 배합보다 3성분계의 배합이 우수한 역학적 성질을 나타내었으며, 과밀 배근된 프리캐스트 교량 부재에 사용 가능할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.161-166
• /
• 1994

Production of high strength concrete requires a low water-cement ratio and this leads to the high cement content. Mineral admixture like fly ash(FA) is often cheaper than ordinary portland cement(OPC) and this factor in combination with possible improvement in workability and moderation of the heat evolution of the cement-rich mixes tends to encourage its use. The other mineral admixture that its use has been widly advocated is silica fume that increases compressive strength due to its pozzolanic reaction. The objective of this study is to assess the contribution of mineral admixtures(FA, SF) to the workability and the strength of concrete with low water-binder ratios. In this experimental study that investigates and analyzes the properties of fresh concrete, it is presented that using admixtures like flysh and silica fume as binding material increases properties of high strength flowing concrete having very low water cementitious ratios of 0.25 and 0.30.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.84-87
• /
• 1995

Production of high strength concrete requires a low water-cement ratio and this leads to the high cement content. Mineral admixture like fly ash(FA) is often cheaper than ordinary portland cement(OPC) and this factor in combination with possible improvement in workability and moderation of the heat evolution of the cement-rich mixes tends to encourage its use. The other mineral admisture that its use has been widly advocated is silica fume that increases compressive strength due to its pozzolanic reaction. The objective of this study is to assess the contribution of mineral admixtures(FA, SF) to the workability and the strength of concrete with low water-binder ratios. In this experimental study that investigates and analyzes the properties of fresh concrete. it is presented that using admixtures like flyash and silica fume as binding material increases properties of high strength flowing concrete having very low water cementitious ratios of 0.25 and 0.30.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.99-102
• /
• 2002

This paper discusses the estimation of construction cost of high fluidity concrete using segregation reducing type superplasicizer with 350kgf/cm2 of design strength and 60$\pm$5cm of slump flow in order to verify the cost down effect of high fluidity concrete compared with that of plain concrete with 350kgf/cm2 of design strength and 18cm of slump and with 210kgf/cm2 of design strength and 15cm of slump. According to research, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.

• 대한토목학회논문집
• /
• 제28권1A호
• /
• pp.155-163
• /
• 2008

최근 구조물이 대형화, 특수화 및 초고층화 되고 있는 건설현장에서는 일반콘크리트보다 더 뛰어난 고성능 콘크리트의 시험적인 시공이 증가하고 있는 추세이다. 교량의 경우 과거 동바리 공법에 의한 시공은 소음 및 분진과 공사기간의 장기화 등의 문제로 점점 감소되었으며, 최근에는 시공기간 단축 및 도심지 환경에 적합한 프리캐스트로 시공하는 현장이 급속히 증가하고 있다. 교량구조물의 경우 휨에 대한 안전성을 확보하기 위하여 과밀배근된 부재를 생산하고 있는 실정이며, 과밀배근된 부재를 생산하기 위하여 일반콘크리트보다 유동과 충전성능이 월등한 초유동 자기충전 콘크리트가 적용되는 것이 바람직하다고 판단된다. 본 연구에서는 고로슬래그 및 플라이애쉬를 2성분계 및 3성분계 배합을 통하여 과밀배근된 교량구조물에 초유동 자기충전 콘크리트를 적용하기 위한 방법으로 과밀배근된 구조물에 적용할 수 있는 일본 토목학회의 JSCE 1등급 규정에 따른 초유동 자기충전 콘크리트의 유동 특성을 검토하였다.

• 한국농공학회지
• /
• 제45권7호
• /
• pp.27-37
• /
• 2003

This study was performed to examine the flowing ability and filling ability of polypropylene fiber reinforced high performance concrete. The slump flow was decreased with increasing the polypropylene fiber content, rapidly. At the box-type filling ability, the difference of box height was increased with increasing the fiber content and the box-type passing ability was closed in fiber content 1 %. The final flowing distance of L-type was decreased with increasing the fiber content. Also, it was decreased above 0.75% of polypropylene fiber content, rapidly. The filling ability of L-type was badly showed above polypropylene fiber content 0.75%. Also, the compressive strength was decreased with increasing the fiber content, but the flexural strength was shown higher than that of the concrete without fiber. At the impact resistance, drop numbers for reaching in final fracture were increased with increasing the fiber content. Also, the drop numbers for reaching initial fracture of 1mm were increased with increasing the fiber content. At the acid resistance, the percent of original mass was decreased with increasing the fiber content.