• 센서학회지
• /
• 제29권1호
• /
• pp.27-32
• /
• 2020

This study proposes a pixel-patterning method for organic light-emitting diodes (OLEDs) based on thermal transfer. An infrared lamp was introduced as a heat source, and glass type donor element, which absorbs infrared and generates heat and then transfers the organic layer to the substrate, was designed to selectively sublimate the organic material. A 200 nm-thick layer of molybdenum (Mo) was used as the lightto-heat conversion (LTHC) layer, and a 300 nm-thick layer of patterned silicon dioxide (SiO₂), featuring a low heat-transfer coefficient, was formed on top of the LTHC layer to selectively block heat transfer. To prevent the thermal oxidation and diffusion of the LTHC material, a 100 nm-thick layer of silicon nitride (SiN_x) was coated on the material. The fabricated donor glass exhibited appropriate temperature-increment property until 249 ℃, which is enough to evaporate the organic materials. The alpha-step thickness profiler and X-ray reflection (XRR) analysis revealed that the thickness of the transferred film decreased with increase in film density. In the patterning test, we achieved a 100 ㎛-long line and dot pattern with a high transfer accuracy and a mean deviation of ± 4.49 ㎛. By using the thermal-transfer process, we also fabricated a red phosphorescent device to confirm that the emissive layer was transferred well without the separation of the host and the dopant owing to a difference in their evaporation temperatures. Consequently, its efficiency suffered a minor decline owing to the oxidation of the material caused by the poor vacuum pressure of the process chamber; however, it exhibited an identical color property.

• BMB Reports
• /
• 제34권6호
• /
• pp.551-558
• /
• 2001

We extended the measurable time scale of DNA dynamics to submicrosecond using a long-lifetime metal-ligand complex, $[Ru(phen)_2(dppz)]^{2+}$ (phen=1,10-phenanthroline, dppz=dipyrido[3,2-a:2',3'-c]phenazine) (RuPD), which displays a mean lifetime near 350 ns. We partially characterized the fluorescence resonance energy transfer (FRET) in calf thymus DNA from RuPD to nile blue (NB) using frequency-domain fluorometry with a high-intensity, blue light-emitting diode (LED) as the modulated light source. There was a significant overlap of the emission spectrum of the donor RuPD with the absorption spectrum of the acceptor NB. The F$\ddot{o}$rster distance ($R_0$) that was calculated from the spectral overlap was $33.4\;{\AA}$. We observed dramatic decreases in the steady-state fluorescence intensities of RuPD when the NB concentration was increased. The intensity decays of RuPD were matched the closest by a triple exponential decay. The mean decay time of RuPD in the absence of the acceptor NB was 350.7 ns. In a concentration-dependent manner, RuPD showed rapid intensity decay times upon adding NB. The mean decay time decreased to 184.6 ns at $100\;{\mu}M$ NB. The FRET efficiency values that are calculated from the mean decay times increased from 0.107 at $20\;{\mu}M$ NB to 0.474 at $100\;{\mu}M$ NB concentration. The use of FRET with a long-lifetime metal-ligand complex donor is expected to offer the opportunity to increase the information about the structure and dynamics of nucleic acids.

• ALGAE
• /
• 제26권4호
• /
• pp.343-350
• /
• 2011

Fermentation and enzyme-assisted extraction (EAE) improve nutritional and functional properties of foods by increasing the extraction of active compounds, ingestion rates, and body absorption. In this study, we investigated whether applying the EAE process improves the extraction and isolation efficiency of a polysaccharide from fermented Ecklonia cava (FE), which inhibited NO production in lipopolysaccharide (LPS)-activated RAW 264.7 cells. The results showed that the FE using the fungi Candida utilis and two different bacteria, namely Lactobacillus brevis and Saccharomyces cerevisiae increased protein and carbohydrate contents in comparison with those in non-fermented E. cava (NE). Aqueous extracts of fermented E. cava increased extraction yields and carbohydrate content, compared with the aqueous extract of NE. In addition, treating LPS-stimulated RAW 264.7 cells with aqueous extracts resulted in reduced NO production compared to that in LPS-treated cells. Ten EAEs of L. brevis-fermented E. cava (LFE) improved NO inhibitory effects in LPS-activated RAW 264.7 cells and the Viscozyme extract (VLFE) from the resulting extracts showed the highest NO inhibitory effect. We found that the >30 kDa fraction of VLFE led to markedly high inhibition of LPS-induced NO production as compared to that in the <30 kDa fraction. The crude polysaccharide isolated from >30 kDa fraction (VLFEP) consisted of fucose and markedly decreased NO production induced by LPS stimulation. VLFEP could be useful as an anti-inflammatory agent to suppress macrophage activation.

• 한국의류학회지
• /
• 제26권7호
• /
• pp.958-969
• /
• 2002

No one doubts that textile and apparel industries have contributed to economic miracles of the export-led growth in Korea. However, by the turning of 1990′s, these sectors have encountered many problems such as decreasing of domestic production and exports mainly due to wage rise and shortage. Therefore, foreign direct investment to the low labor cost countries has been enlarged for a way of improving its competitiveness and increasing exports. However, no intensive study has been made exploring current investments and future directions. This study focuses Vietnam as one of the promising overseas investment countries. The purposes of this study are to analyze current investment status of Korean textiles and apparel firms in Vietnam, to explore merits and problems Vietnam has, and to present useful implications and strategies for Korean textiles and apparel companies. Analysis of current secondary data suggests that Korean apparel industry, rather than textiles industry, have invested more in Vietnam, mostly in southern Ho Chi Minh City. Investments of Korean apparel and textile firms have shown steady increase from 1990 but have turned to a decrease from 1995. Findings suggested that Vietnam has merits for attracting foreign investment since it provides relatively cheap labor and outstanding skillful hands suitable for apparel and textiles industries. In addition, because of EU quota increase and the trade agreement between Vietnam and USA it is likely for firms in Vietnam to increase exports to EU and USA Rapid expansion of domestic apparel market and "Korean trend (Han Rue)" in Vietnam resulted from successful star marketing of Korean firms are another merits Vietnam has to the Korean fm. However, regulations of central government, low efficiency of bureaucratic and stiff administrative process, difficulty of making decision in case of joint venture, lack of social overhead capital, high factory construction costs, weak construction condition, and the excessive competition among investment enterprises have found to be problems. Based on pros and cons of investment to Vietnam, marketing strategies, practical implications and future directions were suggested.

• 한국수자원학회논문집
• /
• 제30권5호
• /
• pp.459-465
• /
• 1997

스팀의 온도와 압력을 이용하여 불수용성 유기화합물(NAPL)로 오염된 토양의 정화가능성을 알아보기 위한 실험을 수행하였다. Octane, Toluene, Xulene과 같은 단일 NAPL인 Gasoline을 대상으로 실험을 수행하였으며, 사용된 토양은 주문진 표준사와 국내 지반에 많인 산재하는 화강토를 선택하였다. 실험결과 1 pore volume의 스팀주입으로 인한 NAPL제거율은 모래의 경우 66∼78%, 화강토의 경우는 45∼73%로 나타나 상대적으로 짧은 시간에 부작용 없이 오염물을 토양으로부터 제거할 수 있는 가능성을 보였다. 배경온도가 높을수록 스팀의 응축이 지연되고 NAPL의 유동성이 중가하여 제거율이 높아짐을 확인하였다. 또한, 스팀주입 후 온수를 유입시켜 간극사이에 증기 및 액체상태로 존재하는 NAPL을 추가로 추출할 수 있었으며, 유입수의 온도에 따라 제거율이 최고 750%까지 상승함을 알 수 있었다.

• 한국재료학회지
• /
• 제29권6호
• /
• pp.385-391
• /
• 2019

In the present study, vanadium oxide($V_2O_5$) films for electrochromic(EC) application are fabricated using sol-gel spin coating method. In order to optimize the EC performance of the $V_2O_5$ films, we adjust the amounts of polyvinylpyrrolidone(PVP) added to the solution at 0, 5, 10, and 15 wt%. Due to the effect of added PVP on the $V_2O_5$ films, the obtained films show increases of film thickness and crystallinity. Compared to other samples, optimum weight percent(10 wt%) of PVP led to superior EC performance with transmittance modulation(45.43 %), responding speeds(6.0 s at colored state and 6.2 s at bleached state), and coloration efficiency($29.8cm^2/C$). This performance improvement can be mainly attributed to the enhanced electrical conductivity and electrochemical activity due to the increased crystallinity and thickness of the $V_2O_5$ films. Therefore, $V_2O_5$ films fabricated with optimized amount of PVP can be a promising EC material for high-performance EC devices.

• Current Photovoltaic Research
• /
• 제9권4호
• /
• pp.128-132
• /
• 2021

Advances in screen printing technology have been led to development of high efficiency silicon solar cells. As a post PERx structure, an n-type wafer-based rear side TOPCon structure has been actively researched for further open-circuit voltage (Voc) improvement. In the case of the metal contact of the TOPCon structure, the poly-Si thickness is very important because the passivation of the substrate will be degraded when the metal paste penetrates until substrate. However, the thin poly-Si layer has advantages in terms of current density due to reduction of parasitic absorption. Therefore, poly-Si thickness and firing temperature must be considered to optimize the metal contact of the TOPCon structure. In this paper, we varied poly-Si thickness and firing peak temperature to evaluate metal induced recombination (Jom) and contact resistivity. Jom was evaluated by using PL imaging technique which does not require both side metal contact. As a results, we realized that the SiN_x deposition conditions can affect the metal contact of the TOPCon structure.

• 센서학회지
• /
• 제31권4호
• /
• pp.249-254
• /
• 2022

To achieve high-performance colloidal quantum dot light-emitting diodes (QD-LEDs), the use of a densely packed QD film is crucial to prevent the formation of leakage current pathways and increase in interface resistance. Spin coating is the most common method to deposit QDs; however, this method often produces pinholes that can act as short-circuit paths within devices. Since state-of-the-art QD-LEDs typically employ mono- or bi-layer QDs as an emissive layer because of their low conductivities, the use of a densely packed and pinhole-free QD film is essential. Herein, we introduce the Langmuir-Blodgett (LB) technique as a deposition method for the fabricate densely packed QD films in QD-LEDs. The LB technique successfully transfers a highly dense monolayer of QDs onto the substrate, and multilayer deposition is performed by repeating the transfer process. To validate the comparability of the LB technique with the standard QD-LED fabrication process, we fabricate and compare the performance of LB-based QD-LEDs to that of the spin-coating-based device. Owing to the non-destructiveness of the LB technique, the electroluminescence efficiency of the LB-based QD-LEDs is similar to that of the standard spin coating-based device. Thus, the LB technique is promising for use in optoelectronic applications.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권5호
• /
• pp.397-405
• /
• 2022

Computed radiography (CR) systems, which convert an analog signal recorded on a cassette into a digital image, combine the characteristics of analog and digital imaging systems. Compared to digital radiography (DR) systems, CR systems have presented difficulties in evaluating system performance because of their lower detective quantum efficiency, their lower signal-to-noise ratio (SNR), and lower modulation transfer function (MTF). During the step of energy-storing and reading out, a baseline offset occurs in the edge area and makes low-frequency overestimation. The low-frequency offset component in the line spread function (LSF) critically affects the MTF and other image-analysis or qualification processes. In this study, we developed the method of baseline correction using mathematical morphology to determine the LSF and MTF of CR systems accurately. We presented a baseline correction that used a morphological filter to effectively remove the low-frequency offset from the LSF. We also tried an MTF evaluation of the CR system to demonstrate the effectiveness of the baseline correction. The MTF with a 3-pixel structuring element (SE) fluctuated since it overestimated the low-frequency component. This overestimation led the algorithm to over-compensate in the low-frequency region so that high-frequency components appeared relatively strong. The MTFs with between 11- and 15-pixel SEs showed little variation. Compared to spatial or frequency filtering that eliminated baseline effects in the edge spread function, our algorithm performed better at precisely locating the edge position and the averaged LSF was narrower.

• 한국전자통신학회논문지
• /
• 제17권3호
• /
• pp.483-490
• /
• 2022

말라리아는 기생충에 의해 발생하는 질병으로 전 세계에 퍼져있다. 말라리아 셀을 인식하는데 일반적으로 두꺼운 혈흔과 얇은 혈흔 검사 방법이 사용되지만 이러한 방법은 많은 수작업 계산이 필요하여 효율성과 정확성이 매우 낮을 뿐만 아니라 빈민국에는 병리학자가 부족하여 말라리아 치명율이 높다. 본 논문에서는 특징 추출기, 잔류 구조와 완전 연결층으로 구성되고, 전이 학습을 이용한 말라리아셀 이미지를 인식하는 모델을 제안한다. VGG-19 모델의 사전 학습된 파라미터가 사용될 때 일부 컨볼루션층의 파라미터는 고정되고, 모델의 데이터에 맞추기 위하여 미세조정이 사용된다. 그리고 제안된 모델과 비교하기 위하여 잔류 구조가 없는 말라리아셀 인식 모델을 구현한다. 실험 결과 잔류 구조를 사용한 모델이 잔류 구조가 없는 모델에 비하여 성능이 우수 하였으며, 최신 논문과 비교하여 가장 높은 97.33%의 정확도를 보여주었다.