• 방송공학회논문지
• /
• 제20권5호
• /
• pp.756-769
• /
• 2015

본 논문에서는 SHVC (Scalable High Efficiency Video Coding)의 계층적 부호화 구조를 기반으로 HDR (High Dynamic Range) 영상과 SDR (Standard Dynamic Range) 영상의 부호화 방법을 제안한다. 본 논문의 제안하는 방법은 SHVC 계층적 부호화 구조 중 기본 계층에서 SDR 영상을 부호화 및 복호화하여, 기존의 디스플레이 장치에 대한 하위 호환성을 제공하고, 향상 계층에서 HDR 영상에 대한 부호화 및 복호화를 수행한다. 또한, 기본 계층의 복원 영상에 전역 역 톤 맵핑 (Global inverse tone mapping)을 수행하여 향상 계층의 참조 영상으로 사용함으로써 HDR 영상의 부호화 효율을 향상시켰다. 본 논문에서 제안하는 방법을 통해 기존의 SHVC 레퍼런스 소프트웨어인 SHM7.0 대비 약 향상 계층에서 평균 43%, 최대 76.3%의 BD-Bitrate 감소를 얻을 수 있었으며, 기본 계층과 향상 계층 전체에서 평균 15.7%, 최대 31%의 BD-Bitrate 감소를 보였다.

• 전기전자학회논문지
• /
• 제22권4호
• /
• pp.901-906
• /
• 2018

영상을 출력하는 디스플레이 기술의 발달로 인하여 영상의 해상도와 품질이 나날이 증가하고 있다. 이러한 디스플레이 기술의 발달에 맞추어, 기존의 영상들을 더 높은 해상도와 품질로 변환하여 디스플레이 할 수 있는 기술에 대한 연구가 활발하게 이루어지고 있다. 이러한 연구 결과는 이미지 신호 처리 장치에 포함되기 때문에 하드웨어 구현이 필수적으로 요구된다. 본 논문에서는, 영상의 휘도 분포를 이용한 LDR(Low Dynamic Range) 영상의 실시간 HDR(High Dynamic Range) 변환 하드웨어 구현을 제안한다. 제안하는 방법은 휘도 분포의 히스토그램을 이용하여 영상의 특징을 추출하고, 이를 바탕으로 하여 휘도와 색상을 확장한다. 또한, 제안한 알고리즘을 하드웨어 IP(Intellectual Property)로 설계하여 그 성능을 검증하였을 때, 최대 동작 주파수 265.46MHz로 4K DCI(Digital Cinema Image) 영상에 대하여 30fps로 동작하여 4K 표준에 대응할 수 있음을 확인하였다.

• 한국멀티미디어학회논문지
• /
• 제21권11호
• /
• pp.1263-1270
• /
• 2018

Dynamic adaptation method is an effective technique to enhance the usability by personalizing the soft keyboard layout using the user's key input information. In this paper, we propose a dynamic adaptation method of a keyboard by automatically extracting typos from key input information and using adjacent-typo information classified through the relationship between typos. This technique does not limit a range of adaptation to the inside of the key but extends the range to the neighbor key so that the adaptation effect can be achieved in a wide range at a high speed, thereby the proposed method improves the usability of the keyboard with a small number of inputs. The proposed method showed 25% increase in usability compared to the existing method through experiment and it was confirmed that usability improves up to 33% when used with the existing method.

• 소성∙가공
• /
• 제7권6호
• /
• pp.620-630
• /
• 1998

Conventional hot forging and thixoforging of Al 7075 alloy have been compared with respect to microstructures, formability and hardness. Two distinctive temperature-strain rate ranges for hot forging of Al 7075 alloy were observed from the results of simple compression tests with strain rates of 10-3∼101 sec-1 in the temperatures between $250^{\circ}C$ and $500^{\circ}C.$ In the dynamic recovery range (low temperature-high strain rate range) multi-stage forging was necessary to form a complex shape part due to the lack of formability. In the high temperature-low strain rate range, in which dynamic recrystallization takes place a complex shaped park could be formed by single-stage forging. About 50% cold working in the SIMA process was necessary to get a fine and homogeneous microstructures. Microstructural study suggest that thixoforged Al 7075 part has fine grains and homogeneous microstructures. Its hardness number is almost same to that of conventional hot forged part after aging treatment.

• 센서학회지
• /
• 제26권4호
• /
• pp.223-227
• /
• 2017

Conventional CMOS image sensors (CISs) have a trade-off relationship between dynamic range and sensitivity. In addition, their sensitivity is determined by the photodiode capacitance. In this paper, CISs that consist of dual-sensitivity photodiodes in a unit pixel are proposed for achieving wide dynamic ranges. In the proposed CIS, signal charges are generated in the dual photodiodes during integration, and these generated signal charges are accumulated in the floating-diffusion node. The signal charges generated in the high-sensitivity photodiodes are transferred to the input of the comparator through an additional source follower, and the signal voltages converted by the source follower are compared with a reference voltage in the comparator. The output voltage of the comparator determines which photodiode is selected. Therefore, the proposed CIS composed of dual-sensitivity photodiodes extends the dynamic range according to the intensity of light. A $94{\times}150$ pixel array image sensor was designed using a conventional $0.18{\mu}m$ CMOS process and its performance was simulated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.555-560
• /
• 2003

Korean High Speed Train(KHST) has been tested on the high speed test line in Osung site of Korea High Speed Rail Construction Authority (KHRC). since it was developed as G7 Project Plan In 2002. This paper introduces the dynamic test devices in KHST and shows the comparison between the results of test and theoretical computing results which derive from the new model for KHST dynamic behavior. Previous computer simulation model for KHST was developed to review wether the vehicle system was satisfied with the dynamic performance requirements during the design procedure. But It should be applied the results of the parts test for suspension elements in order to compare between the results of computation and real test. Using VAMPIRE Program made by AEA Technology in UK. the new model also was modified. This paper shows that the static wheel loads calculated from new model is similar to test results. For test on high speed line, we prepared the test devices for evaluating the dynamic performances. which was consisted of the accelerometers( based on Kisler Co.) and the data aquisition systems (based on National instrument Co.), and test program coded by LabView 6i program. These lest devices and programs are flexible to extension the channels for adding sensors and connect to the ethernet network. The acceleration of car bodies, bogie frames and axle boxes were compared between the results of computation and test at 150km/. This paper shows that the results of test were high in high frequency band range but similar frequency band range. It might be considered that these differences were caused by the test which did not performed at constant speed for comparison analysis. Also. It will be able to understand the differences and make better results through a lot of tests planed in future.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권3호
• /
• pp.115-122
• /
• 2015

Global Positioning System (GPS) is used in various fields such as communications systems, transportation systems, e-commerce, power plant systems, and up to various military weapons systems recently. However, GPS receiver is vulnerable to jamming signals as the GPS signals come from the satellites located at approximately 20,000 km above the earth. For this reason, various anti-jamming techniques have been developed for military application systems especially and it is also required for commercial application systems nowadays. In this paper, we proposed a dual-channel Global Navigation Satellite System (GNSS) RF ASIC for digital pre-correlation anti-jam technique. It not only covers all GNSS frequency bands, but is integrated low-gain/attenuation mode in low-noise amplifier (LNA) without influencing in/out matching and 14-bit analogdigital converter (ADC) to have a high dynamic range. With the aid of digital processing, jamming to signal ratio is improved to 77 dB from 42 dB with proposed receiver. RF ASIC for anti-jam is fabricated on a 0.18-μm complementary metal-oxide semiconductor (CMOS) technology and consumes 1.16 W with 2.1 V (low-dropout; LDO) power supply. And the performance is evaluated by a kind of test hardware using the designed RF ASIC.

• 한국전자통신학회논문지
• /
• 제11권12호
• /
• pp.1193-1200
• /
• 2016

본 논문에서는 광대역 특성을 갖는 이동통신 RF 모듈의 수동혼변조왜곡신호를 측정할 수 있는 시스템을 개발하였다. 광대역 특성을 나타내기 위하여 RF 수신단에서 저 잡음 특성과 광대역 특성을 만족하는 수신기를 설계하였으며 RF 수신 단에서 넓은 동적영역(high dynamic range)을 나타내도록 하였다. 설계된 수동혼변조왜곡 측정시스템에서 FPGA/DSP를 적용하여 측정된 PIMD신호를 PC에 기록하도록 프로그램 하였다. 650MHz-2700MHz 까지 가변하여 PIMD3를 측정하여 최고 -138dBc를 나타내었다.

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.479-486
• /
• 2010

The purpose of this study was to determine the effects of high-heeled shoe on the quiet standing and gait balance. Twenty women (mean height: $161.6{\pm}3.3\;cm$, mean body mass: $53.8{\pm}6.3\;kg$, mean age: $23.8{\pm}2.7$ yrs..) who were without history or complain of lower limb pain took part in this study. They were asked to stand quietly on a force platform for 30 sec and walk on it at their preferred walking speed (mean speed $3.14{\pm}0.5\;km/hr$.) with wearing three different high-heeled shoe, 3, 7, 9 cm high for collecting data. Data were randomly recorded to collect two trials for quiet standing and five trials for walking The parameters to have been analyzed for comparison between three conditions of the height of high-heeled shoe were COP(Center of Pressure) range, COP velocity, sway area, and free moment on the static balance and COP range, COP velocity, and free moment on the dynamic balance. In this study, high-heel height affected on the COP range and velocity in the ante-posterior direction during walking, dynamic balance, but didn't affect on the quiet standing, static balance.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.183-186
• /
• 2000

The high temperature deformation behavior of spray-formed Al-19wt%Si-1.87wt%Mg-0.085wt.%Fe alloy was studied by torsion testing in the strain rate range of 0.001-1 sec-1 and in the temperature range of 300-500 $^{\circ}C$. The relationship between stress temperature and strain rate is expressed using the Power law. the behavior of dynamic recrystallization is showed in 300-35$0^{\circ}C$, 1-0.1sec-1 and the behavior of dynamic recovery is showed in 450-50$0^{\circ}C$, 0.01-0.001sec-1 The size of Si particles is mall when the temperature is low and the strain rate is high. The strain rate sensitivity(m) and the apparent activation energy(Q) indicate the dependence on strain rate and temperature for flow stress respectively. The hot ductility is high when m is high and Q is low. The maps of strain rate sensitivity and apparent activation energy suggest the optimum processing conditions.