• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.400-409
• /
• 1997

Design of single stage AC/DC converter with high power factor and high efficiency based on half-bridge topology for low power application is proposed. To obtain design equations, modelling and detailed analysis are performed. The proposed converter gives and power factor and high efficiency by employing aynchronous rectifiers. To verify the performances of the proposed converter 90W-converter has been designed. This prototype converter meets IEC555-2 requirements with near unity power factor.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.105-108
• /
• 1999

In this paper, we define the high-speed router as a router, which can support aggregated ports over 25Gbps, and provide issues and trends in high-speed router design. We propose design considerations on IP packet forwarding, switching fabric, packet scheduling and buffer management, network resource reservation, and router operation and administration.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.387-396
• /
• 2004

In order to keep and increase a competitive potential, industrial enterprises have to reduce their costs for product development as well as shorten lead time in product development processes. Moreover they have to respond to market factors and conditions such as increasing demands for functionality and individuality of products, short product life cycles, high pressure on prices and time to market. The improved functional requirement in connection with high time and cost pressure lead to high risk in product development. Technological fine improvements in connection with high time and cost pressure lead to high development risk. To cope with these challenges many enterprises have to collaborate globally. The collaborative engineering in product development is aimed to create distributed collaborative corporations and to facilitate the management of design conflicts. This paper provides a methodology for analyzing collaborative design process as well as the tools and the framework to support collaborative product development. The methodology can identify the interdependences among design tasks and teams. The tools and framework are implemented to facilitate the management of product development process.

• Journal of Korea Multimedia Society
• /
• v.8 no.12
• /
• pp.1605-1612
• /
• 2005

This paper presents the knowledge and experience we obtained by employing multiprocessor systems as a computer simulation design verification to study high-performance computing system. This paper also describes a case study of symmetric multiprocessors (SMP) kernel on a 32 CPUs CC-NUMA architecture using an actual architecture. A small group of CPUs of CC-NUMA, high-performance computer system, is clustered into a processing node or cluster. By simulating the system design verification tools; we discussed SMP OS kernel on a CC-NUMA multiprocessor architecture performance which is $32\%$ of the total execution time and remote memory access latency is occupied $43\%$ of the OS time. In this paper, we demonstrated our simulation results for multiprocessor, high-performance computing system performance, using simulation-based design verification.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1221-1226
• /
• 2008

Present, the cooling method of using a phase-change heat transfer such as immersed type, heat pipe etc is applied in cooling of high-capacity power semiconductors of the main power system for the high speed train with the concentrated traction. In order to apply these phase-change cooling system to the high speed EMU to be developed, needed are technological researches of consideration of installing space, air passage, light weight material and miniaturization. Although this research establishes design specifications through theoretical analysis and computational analysis from the basic design process of the cooling system of the propulsion system for the high-speed EMU, when details design is completed, present improvement subject and optimum design before manufacturing the prototype of the cooling system on the basis of analysis results. And then, carried out will be the performance tests through prototype manufacture and reliability estimation by components of cooling system.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.1
• /
• pp.39-45
• /
• 2022

Normal strategy of structure optimization procedure has been minimum cost or weight design. Minimum weight design satisfying an allowable stress has been used for the ship and offshore structure, but minimum cost design could be used for the case of high human cost. Natural frequency analysis and forced vibration one have been used for the strength estimation of marine structures. For the case of high precision experiment facilities in marine field, the structure has normally enough margin in allowable stress aspect and sometimes needs high natural frequency of structure to obtain very high precise experiment results. It is not easy to obtain a structure design with high natural frequency, since the natural frequency depend on the stiffness to mass ratio of the structure and increase of structural stiffness ordinary accompanies the increase of mass. It is further difficult at the grillage structure design using the profiles, because the properties of profiles are not continuous but discrete, and resource of profiles are limited at the design of grillage structure. In this paper, the grillage structure design system under the constraint of high natural frequency is introduced. The design system adopted genetic algorithm to realize optimization procedure and can be used at the design of the experimental facilities of marine field such as a towing carriage, PMM, test frame, measuring frame and rotating arm.

• International Journal of High-Rise Buildings
• /
• v.1 no.4
• /
• pp.271-281
• /
• 2012

Tianjin Goldin Finance 117 tower has an architectural height of 597 m, total of 117 stories, and the coronation of having the highest structural roof of all the buildings under construction in China. Structural height-width ratio is approximately 9.5, exceeding the existing regulation code significantly. In order to satisfy earthquake and wind-resisting requirements, a structure consisting of a perimeter frame composed of mega composite columns, mega braces and transfer trusses and reinforced concrete core containing composite steel plate wall is adopted. Complemented by some of the new requirements from the latest Chinese building seismic design codes, design of the super high-rise building in high-intensity seismic area exhibits a number of new features and solutions to professional requirements in response spectrum selection, overall stiffness control, material and component type selection, seismic performance based design, mega-column design, anti-collapse and stability analysis as well as elastic-plastic time-history analysis. Furthermore, under the prerequisite of economic viability and a series of technical requirements prescribed by the expert review panel for high-rise buildings exceeding code limits, the design manages to overcome various structural challenges and realizes the intentions of the architect and the client.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.82-88
• /
• 2001

The demands of high data transfer rate and high recording density in optical disk memory device are being increased. In this paper, 4 design parameters for next generation optical disk are investigated. As for the high data transfer rate, two design parameters such as driving acceleration and transmissibility are introduced. As the high recording density is concerned, the minimum linearity and the tilt of the actuator are introduced. Two kinds of pickup actuator are used to evaluate the validity of the parameters through the simulation and the experiment. The 4-wire actuator has good linearity but bad stability and tilt characteristics, while the rotary and axis actuator has good stability for the external vibration but bad linearity. It is demonstrated that the newly proposed design parameters are available to design and evaluate quantitatively the performance of the actuator for the next generation optical disk.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.5 no.2
• /
• pp.1-13
• /
• 2006

The purpose of this study is to clarify the actual conditions of spatial composition of educational facilities by design process model. This article discuses about the characteristics of the floor plan composition and the site plan patterns of 49 middle and high schools in gyeongnam province. The results of this study are summarized as follows; 1) Comparing to traditional middle and high school facilities, it occurs various types of plane and the area is somewhat expanded in the school with same class size, however, it needs to improve facility standards in its reality to deal with the change of future educational environment actively. 2) Spatial composition of educational facilities should functionally designed considering that the characteristics of design process model. In facilities arrangement of middle and high schools, it shows diverse forms of arrangement from existing uniform straight type, however, most of schools do not being against the simple in their external space. Therefore, it requires an expansion of space siæ and facilities for the change of school life outside class.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.243-246
• /
• 2003

This paper presents a new motor design well suited for an advanced exercise bike. The advanced exercise bike setup high demands for performance and physical dimensions, which is high torque, wide speed range and a diameter/length ratio around 5. These requirements makes the new motor design called an E-core Transverse Flu Machine (ETFM) vev interesting because the segmented design of the stator and rotor poles enables high diameter without increasing the flux-path and since the ETFM is similar to the switched reluctance motor, high torque and wide speed range is possible. The design of the ETFM can be peformed using a developed design program, which is also introduced in the paper. A prototype of the exercise bike with the ETFM and a classical H-bridge converter with analog current control is constructed for verification of the concept.