• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제17권3호
• /
• pp.313-319
• /
• 2019

The A-KRS (Advanced Korean Reference Disposal System) is the disposal concept for pyroprocessed waste, which has been developed by the Korea Atomic Energy Research Institute. In this disposal concept, the amount of high-level radioactive waste is minimized using pyrochemical process, called pyroprocessing. The produced pyroprocessed waste is then solidified in the form of monazite ceramic. The final product of ceramic wastes will be disposed of in a deep geological repository. By the way, the decay heat is generated due to the radioactive decay of fission products and raises the temperature of buffer materials in the near field of radioactive waste repository. However, the buffer temperature must be kept below $100^{\circ}C$ according to the safety regulation. Usually, the temperature can be controlled by variation of the canister interdistance. However, KAERI has modelled thermal analysis under the boundary condition, where the waste canisters are in direct contact with each other. Therefore, a reliable temperature analysis in the disposal system may fail because of unknown thermal resistence values caused by the spatial gap between waste canisters. In the present work, we have performed thermal analyses considering the gap between heating elements and canisters at the beginning of canister loading into the radioactive waste repository. All thermal analyses were performed using the COMSOL software package.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제17권3호
• /
• pp.321-328
• /
• 2019

The detection performances of the NaI(Tl), $LaBr_3$(Ce) and $CeBr_3$ scintillation detectors, which can be used to rapidly evaluate the major artificial radionuclides deposited on the soil surface in a nuclear accident or radiological emergency, were compared. Detection performance was assessed by calculating the minimum detectable activity (MDA). The detection efficiency of each detector for artificial radionuclides was semi-empirically determined using mathematical modelling and point-like sources having certified radioactivity. The background gamma-ray energy spectrum for MDA evaluation was obtained from relatively wide and flat grassland, and the MDA values of each detector for the major artificial radionuclides that could be released in nuclear accidents were calculated. As a result, the relative MDA values of each detector regarding surface deposition distribution at normal environmental radiation level were evaluated as high in the order of the NaI(Tl), $LaBr_3$(Ce), and $CeBr_3$ detectors. These results were compared based on each detector's intrinsic and measurement environment background, detection efficiency, and energy resolution for the gamma-ray energy region of the radionuclide of interest.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제18권1호
• /
• pp.109-115
• /
• 2019

In arc-welding applying to the present automobile part manufacturing process, a wrist-hollow type arc welding robot can shorten the welding cycle time, because feedability of a welding wire is not affected by a robot posture and thus facilitates high-quality arc welding, based on stable feeding with no entanglement. In this paper, we will propose the optimization of wrist design for a wrist-hollow type 6-Axis articulated robot. Specifically, we will perform the investigation on the optimized design of inner diameter of hollow arms (Axis 4 and Axis 6) and width of the upper arm by using the simulation of robot motion characteristics, using a Genetic Algorithm (i.e., GA). Our simulations are based on $SolidWorks^{(R)}$ for robot modeling, $MATLAB^{(R)}$ for GA optimization, and $RecurDyn^{(R)}$ for analyzing dynamic characteristics of a robot. Especially $RecurDyn^{(R)}$ is incorporated in the GA module of $MATLAB^{(R)}$ for the optimization process. The results of the simulations will be verified by using $RecurDyn^{(R)}$ to show that the driving torque of each axis of the writs-hollow 6-axis robot with the optimized wrist design should be smaller than the rated output torque of each joint servomotor. Our paper will be a guide for improving the wrist-hollow design by optimizing the wrist shape at a detail design stage when the driving torque of each joint for the wrist-hollow 6-axis robot (to being developed) is not matched with the servomotor specifications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제20권7호
• /
• pp.520-527
• /
• 2019

In this study, the technical level and competence of Chungbuk region manufactures were diagnosed and implications for efficiency improvement of cooperation with local universities were derived. The results are as follow. First, in Chungbuk area, 75% of the skilled workers are medium-skilled and high skilled workers. And the life cycle of production products was found to have entered middle/old age. In addition, the industries were overestimating its technology capabilities, including marketing and sales technology, and management technology. Therefore, local universities should develop differentiated program such as technology transfer and commercialization support so that companies can nurture new industries and it is necessary to improve understanding of reality and future prediction ability through various education and seminars. Second, universities in Chungbuk province have failed to meet the practical demands of industry by providing general educational programs such as lifelong education curriculum, rather than the practical training required by industry. First of all, industries needed the practical training programs such as human resource empowerment, technical education and workers' retraining for local industry development. In addition, industries were expected to provide relevant knowledge and infrastructure such as testing, analysis, participation in technology development such as commissioning and joint research. Therefore, universities should prepare customized Industry-Academia Cooperation Programs through industry demand survey in planning. Also, it is necessary to establish various connection points with industry to ensure that industry-academia cooperation will continue and achieve results. Third, the technology of the industries in Chungbuk province was found to be very unrelated to the next generation regional strategic industries. This is not shared vision between industry and local government, Industry-Academia Cooperation Programs will serve as a platform to organize various community entities. Universities will be able to play a key role in between industries and local governments.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제17권1호
• /
• pp.29-36
• /
• 2019

High-level radioactive waste (HLW) such as spent fuel is inevitably produced when nuclear power plants are operated. A geological repository has been considered as one of the most adequate options for the disposal of HLW, and it will be constructed in host rock at a depth of 500~1,000 meters below ground level with the concept of an engineered barrier system (EBS) and a natural barrier system. The compacted bentonite buffer is one of the most important components of the EBS. As the compacted bentonite buffer is located between disposal canisters with spent fuel and the host rock, it can restrain the release of radionuclides and protect canisters from the inflow of groundwater. Because of inflow of groundwater into the compacted bentonite buffer, it is essential to investigate soil-water characteristic curves (SWCC) of the compacted bentonite buffer in order to evaluate the entire safety performance of the EBS. Therefore, this paper conducted laboratory experiments to analyze the SWCC for a Korean Ca-type compacted bentonite buffer considering dry density, confined or unconfined condition, and drying or wetting path. There was no significant difference of SWCC considering dry density under unconfined condition. Furthermore, it was found that there was higher water suction in unconfined condition that in confined condition, and higher water suction during drying path than during wetting path.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제16권3호
• /
• pp.485-492
• /
• 2021

The wind turbines with a rated capacity of 50kW or less are generally considered as small class. Small wind turbines are an attractive alternative for off-grid power system and electric home appliances, both as stand-alone application and in combination with other energy technologies such as energy storage system, photovoltaic, small hydro or diesel engines. The research objective is to develop the 50kW scale wind turbine blades in ways that resemble as closely as possible with the construction and methods of utility scale turbine blade manufacturing. The mold process based on wooden form is employed to create a hollow, multi-piece, lightweight design using carbon fiber and fiberglass with an epoxy based resin. A hand layup prototyping method is developed using high density foam molds that allows short cycle time between design iterations of aerodynamic platforms. A production process of five blades is manufactured and key components of the blade are tested by IEC 61400-23 to verify the appropriateness of the design. Also, wind system with developed blades is tested by IEC 61400-12 to verify the performance characteristics. The results of blade and turbine system test showed the available design conditions for commercial operation.

• Clean Technology
• /
• 제27권2호
• /
• pp.160-167
• /
• 2021

This study investigated the environmental effects of improving the general-type activated carbon adsorption tower used at the Sihwa/Banwol Industrial Complex with use of a cartridge-type activated carbon adsorption tower for the application of an activated carbon co-regenerated system. Four general-type activated carbon adsorption towers and two cartridge-type activated carbon adsorption towers were selected to analyze the properties of activated carbon and to compare the efficiency of reducing environmental pollutants. The results showed that the activated carbon used in the cartridge-type activated carbon adsorption towers was high quality activated carbon with an iodine adsorption force of more than 800 mg/g and that a good adsorption performance was maintained within the replacement cycle. From an analysis of the environmental pollutant reduction efficiency, it was confirmed that the cartridge-type activated carbon adsorption tower functioned properly as a prevention facility for handling emissions pollutants with a treatment efficiency of total hydrocarbons (THC), toluene, and methylethylketone (MEK) components of 71%, 77%, and 80%, respectively. The general activated carbon adsorption tower, which was confirmed to use low-performance activated carbon, had a very low treatment efficiency and did not function properly as a prevention facility for dealing with emission pollutants. It is believed that it is possible to reduce pollutants during operations by changing from the general-type activated carbon adsorption tower to a cartridge-type activated carbon adsorption tower.

• Journal of Korean Society of Forest Science
• /
• 제109권4호
• /
• pp.361-370
• /
• 2020

Long-term observation of the life cycle of plants allows the identification of critical signals of the effects of climate change on plants. Indeed, plant phenology is the simplest approach to detect climate change. Observation of seasonal changes in plants using digital repeat imaging helps in overcoming the limitations of both traditional methods and satellite remote sensing. In this study, we demonstrate the utility of camera-based repeat digital imaging in this context. We observed the biological events of plants and quantified their phenophases in the northern temperate type deciduous broadleaf forest of Jeombong Mountain. This study aimed to identify trends in seasonal characteristics of Quercus mongolica (deciduous broadleaf forest) and Pinus densiflora (evergreen coniferous forest). The vegetation index, green chromatic coordinate (GCC), was calculated from the RGB channel image data. The magnitude of the GCC amplitude was smaller in the evergreen coniferous forest than in the deciduous forest. The slope of the GCC (increased in spring and decreased in autumn) was moderate in the evergreen coniferous forest compared with that in the deciduous forest. In the pine forest, the beginning of growth occurred earlier than that in the red oak forest, whereas the end of growth was later. Verification of the accuracy of the phenophases showed high accuracy with root-mean-square error (RMSE) values of 0.008 (region of interest [ROI]1) and 0.006 (ROI3). These results reflect the tendency of the GCC trajectory in a northern temperate type deciduous broadleaf forest. Based on the results, we propose that repeat imaging using digital cameras will be useful for the observation of phenophases.

• Journal of Wetlands Research
• /
• 제24권4호
• /
• pp.268-287
• /
• 2022

This study reports newly discovered seven forest wetlands in the western part of the Korean Demilitarized Zone-Civilian Control Zone ecoregion. The wetland assessment criteria proposed by National Arboretum were adopted to evaluate four fields: vegetation and landscape, biogeochemical cycle, hydraulics and hydrology, and social-cultural-historical landscape and disturbances. Among seven wetlands located in Gimpo and Paju, five were of the fallow field type and two were of the natural type. A total of 474 plant species were recorded, including nine rare plants, such as the Carex capricornis Meinsh. ex Maxim. Three forest wetlands were sorted into A-grade, three into B-grade, and one into C-grade. Monitoring forest wetlands scattered across the border area ruled by military regulations can be challenging; still, as forest wetlands with high conservation value turned out, further investigations through remote sensing and cooperation by the relevant agencies will be required.

• Journal of Industrial Convergence
• /
• 제18권6호
• /
• pp.139-146
• /
• 2020

Care of people with severe disabilities requires care throughout their life cycle compared to non-disabled families. For this reason, carers of severely handicapped families are highly likely to have negative feelings throughout the family as well as daily stress. Disabled families also have a high rate of experiencing difficulties between non-disabled children or married couples in life centered on the disabled. In particular, the rapid aging in Korea affects the lives of the elderly disabilities along with the aging of the caregivers. The study explored alternatives to realistic support through the past and present experiences of caregivers with disabilities through qualitative research methods, and derived hopes and expectations for the future as follows.First, after confirming the disability for infants and toddlers with disabilities, information about the support system or system is provided from the rating agency. Second, providing "customized care support" suitable for the type of disability or individual characteristics at the social, political, institutional, and economic levels. Third, the provision of programs for non-disabled children and the provision of healing programs only for families with disabilities or those with disabilities. Fourth, the provision of spaces and programs that provide rest and rest for adults with disabilities. Fifth, the application of a long-term care system for the elderly reflecting the aging age of the disabled and institutionalization of community care for the disabled. The research is meaningful in that it presents discussion points for improving the quality of life of adults and the elderly with disabilities.