• Cartoon and Animation Studies
• /
• s.39
• /
• pp.27-58
• /
• 2015

The crisis in profit and funding for animation is in evidence around the world. The change in media environment has forced broadcasting advertising revenue down and animation viewers spread out. Now, animation players in the strongest position are either the US major studios, or producers benefiting from domestic support schemes. Government support is available in many countries because many governments believe that support for domestic animation carries both economic and cultural benefits. This paper is designed to suggest new policy schemes for Korean animation industry. The new paradigm of animation policy needs a new perspective on content industry as a whole, not centered on the animation itself. The researchers on public policy for culture, audiovisual and content industry argued that the government should, (i) play the role of facilitator for virtuous cycle of industry value chain, (ii) provide fiscal support through automatic and selective schemes, (iii) provide tax benefit to strengthen the competitiveness of industry, and (iv) enforce the broadcasters to contribute to domestic programming and financing. Comparative analysis on French and Canadian audiovisual policy supports such arguments, and animation industry of two countries are enjoying the high audience ratings and sustainable production volume. From the analysis, this paper suggests the new government schemes for Korean animation industry, which are, (i) securing the public funding for fiscal support, (ii) introduction of automatic production support, (iii) modification of broadcasting quota, (iv) broadcaster's performance envelope and production quota, and (v) tax benefit as indirect support.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.323-328
• /
• 2016

Pressurized membrane used for side-stream MBR process requires fouling control strategy both for normal and abnormal operation conditions for stable operation of the facilities. In this study, $85m^3/day$ of pilot-scale side-stream MBR process was constructed for the evaluation of fouling mitigation by air bubble injection into the membrane module. In addition, fouling phenomena at abnormal operation conditions of low influent and/or loading rate were also investigated. Injection of air bubble was found to be effective in delaying transmembrane pressure (TMP) increase mainly due to scouring effect on the membrane surface, resulting in expanded filtration cycle at a high flux of $40L/m^2{\cdot}h$ (LMH). At abnormal operation condition, injection of PACl (53 mg/L as Al) into the bioreactor showed 19% reduction of TMP increase. However, inhibition of nitrifying bacteria by continuous PACl injection was observed from batch experiments. In contrast, injection of powdered activated carbon (PAC, 0.6 g/L) was able to maintain the initial TMP of $0.2kg/cm^2$ for 5 days at the abnormal conditions. It may have been caused from the adsorption of extracellular polymeric substances (EPS), which was known to be excessively released during growth inhibition condition and act as the major foulants in MBR operations.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.325-337
• /
• 2006

The purpose of this study was to examine the oral health state of the elderly in an effort to pave the way for dental health project planning for the elderly for the city of Jeonju and to help promote the oral health of the elderly population to which health care services weren't accessible a lot. The subjects in this study were 300 elderly people who were in their 60s and up and used 10 different welfare establishments for the elderly in Jeonju. A survey was conducted from May 3 through 13, 2005, by interviewing them in person, and the collected data were analyzed. The findings of the study were as follows: 1. In terms of the period of oral health examination, 44.1 percent of the 66-70 age group, 48.1 percent of the elementary school graduates and 39.4 percent of the house owners had their teeth examined whenever they had a toothache. So their cycle of oral health examination was statistically significantly different according to age(p<.05), education(p<0.001) and form of residence(p<0.001). 2. Regarding the necessity of prosthesis, prosthesis was needed by 52.1 percent of the age group from 71 to 80, 44.3 percent of the women, 48.9 percent of the men, 60.0 percent of the community college graduates and 55.9 percent who rent a house on a deposit or monthly basis. But there was no statistically significant gap among the groups. 3. As for the necessity of oral health education, the necessity of it was absolutely supported by 89.7 percent of the 66-70 age group, 76.0 percent of the women, 87.2 percent of the men, 95.3 percent of the middle school graduates and 87.7 percent of the house owners. Their age(p<.0.01), gender(p<0.05) education(p<0.05) and form of residence(p<0.01) made a statistically significant difference to that. 4. Concerning oral health education experience, 79.3 percent of the high school graduates and 79.8 percent of the house owners had never received oral health education, and that experience statistically significantly varied with education(p<0.001) and form of residence (p<0.001). 5. As to the biggest reason for oral health care, 50.0 percent found it necessary to take care of their teeth to ensure their own perpetual oral health, and 33.7 percent felt the need for that because they had a toothache. The above-mentioned findings indicated that the elderly people were definitely in want of oral health education. Dental hygienists in public dental clinics should serve as dental health educators to address their needs, and regular oral health care programs should be prepared to spread awareness about the importance of oral health among elderly locals.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.362-369
• /
• 2013

Phytoplankton and zooplankton communities were investigated from 8 weir sites of the Nakdong River system to provide basic information on plankton community after weir construction and to estimate its effects on major water quality parameters. The relationship between plankton community structure and environmental factors was analysed with CCA (Canonical Correspondence Analysis). The results suggested that discharge and total phosphorus and nitrogen concentrations are important factors determining the phytoplankton species composition. For zooplankton community, the difference in discharge between September and October induced different distribution pattern of zooplankton community with more homogeneous distribution with extreme dominance of rotifers during the high discharge season. Chlorophyll a concentration representing phytoplankton biomass has been suggested as the main environmental factor affecting zooplankton community followed by COD and total nitrogen concentration.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.3
• /
• pp.215-220
• /
• 2010

An experiment measuring the concentration ratios of $^{137}Cs$ and $^{85}Sr$ in fish as an index aquatic animal was performed. The species was Chinese minnow (Rhynchocypris Oxycephalus), a Korean native freshwater species. Chinese minnows were reared in acryl aquarium which was 45 cm wide, 85 cm long and 50 cm high. Water in the aquarium was successively purified using filtering devices attached on the floor and the wall. Fish powder in a particulate form was supplied twice a day for feeding. After a radioactive solution was added to make the initial water concentrations approximately $0.02\;{\mu}Ci/l$ and $0.1\;{\mu}Ci/l$ for $^{137}Cs$ and $^{85}Sr$, respectively, the fish and water were sampled 10 times for a month. The concentration ratios were measured to be $0.348lkg^{-1}\sim13.906lkg^{-1}$ for $^{137}Cs$ and $0.474lkg^{-1}\sim13.089lkg^{-1}$ for $^{85}Sr$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.3
• /
• pp.181-188
• /
• 2010

Metal surface decontamination characteristics were investigated by using a laser ablation method. A second harmonic generation of a Q-switched Nd:YAG laser with a wave length of 532 nm, a pulse energy of 150 mJ and a pulse width of 5 ns was employed to assess the decontamination performance for metal surfaces contaminated with $CsNO_3$, $Co(NH_4)_2(SO_4)_2$, $Eu_2O_3$ and $CeO_2$. The ablation behavior was investigated for the decontamination variables such as a number of laser shots, laser fluence and an irradiation angle. Their optimum values were found to be 8, 13.3 J/$cm^2$ and $30^{\circ}$, respectively. The decontamination efficiency was different depending on the kinds of the contaminated ions, due to their different melting and boiling points and was in the order: $CsNO_3>Co(NH_4)_2(SO_4)_2>Eu_2O_3>CeO_2$. We also evaluated a correlation between the metal ablation thickness and the number of laser shots for the different laser fluences.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.115-122
• /
• 2010

In this study, the removal of Cs and Tc from a simulated fission products (FP) solution which were co-dissolved with U during the oxidative-dissolution of spent fuel in a mixed carbonate solution of $(Na_2CO_3-NaHCO_3)-H_2O_2$ was investigated by using a selective precipitation method. As Cs and Tc might cause an unstable behavior due to the high decay heat emission of Cs as well as the fast migration of Tc when disposed of underground, it is one of the important issues to removal them in views of the increase of disposal safety. The precipitation of Cs and Re (as a surrogate for Tc) was examined by introducing sodium tetraphenylborate (NaTPB) and tetraphenylphosponium chloride (TPPCl), respectively. Precipitation of Cs by NaTPB and that of Re by TPPCl were completed within 5 minutes. Their precipitation rates were not influenced so much by the temperature and stirring speed even if they were increased by up to $50^{\circ}C$ and 1,000 rpm. However, the pH of the solution was found to have a great influence on the precipitation with NaTPB and TPPCl. Since Mo tends to co-precipitate with Re at a lower pH, especially, it was effective that a selective precipitation of Re by TPPCl was carried out at pH of above 9 without co-precipitation of Mo and Re. Over 99% of Cs was precipitated when the ratio of [NaTPB]/[Cs]>1 and more than 99% of Re, likewise, was precipitated when the ratio of [TPPCl]/[Re]>1.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.81-86
• /
• 2011

Polymer-modified cement is the composite material made by partially replacing and strengthening the cement hydrate binders of conventional mortar with polymeric modifiers such as polymer latexes and redispersible polymeric modifiers. It is known that the addition of polymer to cement mortar leads to improved quality, which would be expected to have a high chemical resistance. Therefore, the purpose of this study is to identify the improved chemical resistance, such as low permeability and low ion diffusivity, of the polymer-modified cement as a solidification agent for the radwaste. First, polymer-modified cement specimens by latex modification were prepared according to the polymer content from 0% to 30% to select the optimized polymer content. At those specimens, the water-to-cement (W/C) ratio was maintained to 33% and 50% respectively. After the much curing time, the structural integrity of specimens was evaluated through the compressive strength test and the porosity evaluation by the water immersion method. From the results, 10% of the polymer content at 33% of the W/C ratio was shown to have the most improved quality. Finally, the leaching test referredfrom ANS 16.1 for the specimens having the most improved quality was conducted. Dedicated specimens for the leaching test were then mixed with radioisotopes of $^{60}Co$ and $^{137}Cs$ at the specimen preparation.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.2
• /
• pp.155-162
• /
• 2008

Inventories to be disposed of, reference turnup, and source terms for CANDU spent fuel were evaluated for geological disposal system design. The historical and projected inventory by 2040 is expected to be 14,600 MtU under the condition of 30-year lifetime for unit 1 and 40-year lifetime for other units in Wolsong site. As a result of statistical analysis for discharge burnup of the spent fuels generated by 2007, average and stand deviation revealed 6,987 MWD/MtU and 1,167, respectively. From this result, the reference burnup was determined as 8,100 MWD/MtU which covers 84% of spent fuels in total. Source terms such as nuclide concentration for a long-term safety analysis, decay heat, thermo-mechanical analysis, and radiation intenity and spectrum was characterized by using ORIGEN-ARP containing conservativeness in the aspect of decay heat up to several thousand years. The results from this study will be useful for the design of storage and disposal facilities.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.2
• /
• pp.101-109
• /
• 2008

For the Kyungju bentonite which is considered as a candidate material for the buffer and backfill in the high-level waste repository, the thermal conductivities of compacted bentonite and a bentonite-sand mixture were measured. The thermal conductivities of the compacted bentonites with a dry density of 1.2 to $1.8\;Mg/m^3$ and the bentonite-sand mixture with a dry density of 1.6 and $1.8\;Mg/m^3$ were measured within the gravimetric water content range of 10wt% to 20wt% and the sand fraction range of 10 to 30wt%. The thermal conductivity of compacted bentonite and a bentonite-sand mixture increases with increasing dry density and sand weight fraction in the case of constant water weight fraction, and increases with increasing water weight fraction and sand weight fraction in the case of constant dry density. The empirical correlations to describe the thermal conductivity of compacted bentonite and a bentonite-sand mixture as a function of water fraction at each dry density were suggested. These correlations can predict the thermal conductivities of bentonite and a bentonite-sand mixture with a difference below 10%.