• Journal of the Korean School Mathematics Society
• /
• v.4 no.2
• /
• pp.135-142
• /
• 2001

The selected questions for this study was their conversation in problem solving way of working together. To achieve its purpose researcher I chose more detail questions for this study as follows. $\circled1$ What is the difference of strategy according to its level \ulcorner $\circled2$ What is the mathematical ability difference in problem solving process concerning its level \ulcorner This is the result of the study $\circled1$ Difference in the strategy of each class of students. High class-high class students found rules with trial and error strategy, simplified them and restated them in uncertain framed problems, and write a formula with recalling their theorem and definition and solved them. High class-middle class students' knowledge and understanding of the problem, yet middle class students tended to rely on high class students' problem solving ability, using trial and error strategy. However, middle class-middle class students had difficulties in finding rules to solve the problem and relied upon guessing the answers through illogical way instead of using the strategy of writing a formula. $\circled2$ Mathematical ability difference in problem solving process of each class. There was not much difference between high class-high class and high class-middle class, but with middle class-middle class was very distinctive. High class-high class students were quick in understanding and they chose the right strategy to solve the problem High class-middle class students tried to solve the problem based upon the high class students' ideas and were better than middle class-middle class students in calculating ability to solve the problem. High class-high class students took the process of resection to make the answer, but high class-middle class students relied on high class students' guessing to reconsider other ways of problem-solving. Middle class-middle class students made variables, without knowing how to use them, and solved the problem illogically. Also the accuracy was relatively low and they had difficulties in understanding the definition.

• Hwankyungkyoyuk
• /
• v.23 no.4
• /
• pp.1-14
• /
• 2010

The purpose of this study is to find the meaning of the good class, and based on this, situation of environmental education in high school is researched. Through those above processes, desirable direction of the environment class is suggested. For this study, we are trying to reflect the characteristics of environmental education on the general good classes, and from this, the meaning of good environment class is known. Moreover, for this study, we choose environment classes from four high schools leading by environment major teacher. From those four classes, we analyzed these things: educational situation of environment class, teachers' interviews. All of these are for analyzing environment class with the view of good environmental class. A well-formed environment class manifests the features of environment education in all aspects of teaching and learning process, including learning objectives, learning materials, procedures, and evaluations. Furthermore, it should be 'student-centered' class in which active interaction among the learners or between the instructor and the students is considered most important. Students are not the passive receiver, but rather, they actively participate in the learning process by reorganizing the knowledge as they experience and become independent learners who are actively involved in the problem-solving process. In this way, we can generate a great deal of students' interest and motivation, which in turn makes the class interesting, enjoyable, full of energy and still effective. If there is the class reflecting the factors of environmental education above good class' ways, it will be the good environment class. In the current situation of environment class, the rate of student's class participation and study activity was low. This tendency is not too different between four groups except students' support to teachers. This result means that learners' will to participate in their classes actively is not high. Moreover, about 46.3% of students did not understand some parts of new knowledge and about the parts, students' solution was 'does nothing' and the rate was also so high. Teachers tried to make their class with considering students' interest, and focusing their learner's real life. However, learners are all general education high school students, so teachers have aversion about making their students heavy activities.

• The korean journal of orthodontics
• /
• v.48 no.6
• /
• pp.349-356
• /
• 2018

Objective: This study was performed to investigate the alveolar bone of lower incisors in skeletal Class III adults of different vertical facial patterns and to compare it with that of Class I adults using cone-beam computed tomography (CBCT) images. Methods: CBCT images of 90 skeletal Class III and 29 Class I patients were evaluated. Class III subjects were divided by mandibular plane angle: high (SN-MP > $38.0^{\circ}$), normal ($30.0^{\circ}$ < SN-MP < $37.0^{\circ}$), and low (SN-MP < $28.0^{\circ}$) groups. Buccolingual alveolar bone thickness was measured using CBCT images of mandibular incisors at alveolar crest and 3, 6, and 9 mm apical levels. Linear mixed model, Bonferroni post-hoc test, and Pearson correlation analysis were used for statistical significance. Results: Buccolingual alveolar bone in Class III high, normal and low angle subjects was not significantly different at alveolar crest and 3 mm apical level while lingual bone was thicker at 6 and 9 mm apical levels than on buccal side. Class III high angle group had thinner alveolar bone at all levels except at buccal alveolar crest and 9 mm apical level on lingual side compared to the Class I group. Class III high angle group showed thinner alveolar bone than the Class III normal or low angle groups in most regions. Mandibular plane angle showed negative correlations with mandibular anterior alveolar bone thickness. Conclusions: Skeletal Class III subjects with high mandibular plane angles showed thinner mandibular alveolar bone in most areas compared to normal or low angle subjects. Mandibular plane angle was negatively correlated with buccolingual alveolar bone thickness.

• The korean journal of orthodontics
• /
• v.43 no.3
• /
• pp.134-140
• /
• 2013

Objective: To evaluate lower incisor position and bony support between patients with Class II average- and high-angle malocclusions and compare with the patients presenting Class I malocclusions. Methods: CBCT records of 79 patients were divided into 2 groups according to sagittal jaw relationships: Class I and II. Each group was further divided into average- and high-angle subgroups. Six angular and 6 linear measurements were performed. Independent samples t-test, Kruskal-Wallis, and Dunn post-hoc tests were performed for statistical comparisons. Results: Labial alveolar bone thickness was significantly higher in Class I group compared to Class II group (p = 0.003). Lingual alveolar bone angle (p = 0.004), lower incisor protrusion (p = 0.007) and proclination (p = 0.046) were greatest in Class II average-angle patients. Spongious bone was thinner (p = 0.016) and root apex was closer to the labial cortex in high-angle subgroups when compared to the Class II average-angle subgroup (p = 0.004). Conclusions: Mandibular anterior bony support and lower incisor position were different between average- and high-angle Class II patients. Clinicians should be aware that the range of lower incisor movement in high-angle Class II patients is limited compared to average- angle Class II patients.

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.394-401
• /
• 2020

Purpose: The present study is an analysis of the extents of class satisfaction of college students who had applied the design thinking technique to capstone design class. Methods: The experimental method involved an analysis of 122 cases of data where advance and post replies were performed for the subject by students who had applied the design thinking technique and students who had not. The students involved had attended the capstone design class as a junior in the Department of Dental Technology at D University. Results: In the satisfaction with performance process of the capstone design class, five questions among nine had a high positive rating, while all eight questions on the satisfaction with performance methods had a high negative rating. Among ten questions on subjective learning outcomes, six showed a high positive rating. After the application of the design thinking class method, all mean values of the group with the application were higher than the group with no application in satisfaction with performance process, satisfaction with performance method, and subjective class outcomes. Hence, the design thinking class did have positive effects on the students' improvement of class. Conclusion: Based on the results of the study, it is implied that the considerations about diverse class composition methods and operation methods capable of improving the students' satisfaction are needed for efficient operation of the capstone design class.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.71-78
• /
• 2011

In this paper, we describe the design and implementation of a high efficiency and broad-band Class-J mode power amplifier using gallium nitride(GaN) high-electron mobility transistor(HEMT). The matching circuit of proposed class-J mode power amplifier for 2nd harmonic impedance designed to provide pure reactance alone. The measurement results show that output power of $40{\pm}1$ dBm, power-added efficiency of 50%, and drain efficiency of 60% for a continuous wave signal at 1.4 to 2.6 GHz.

• Journal of Educational Research in Mathematics
• /
• v.8 no.2
• /
• pp.587-603
• /
• 1998

Being in Learning-accomplishing rate on mutual cooperation studies of small group by different class, we can find that the sujective class of high group is much more efficient than the compared class of high group and that the subjective class of low group is more efficient than the compared class of low group as times goes. Moreover, in analysis of all directions on mathematical attitude, high group appears to be a great efficient in all areas such as confidence, flexibility, reaction, value, etc. and low group seems to have a little effect, by comparing the subjective class with the compared class. A. The result of a scholastic ability test High group had a great effect in the result of the first (Number and an expression) and second(An equation of a figure) scholastic ability test. As the time of research goes, the difference of average between the subjective class and the compared class has increased. Low group had no effect in the result of the first (Number and an expression) and the second (An equation of figure) scholastic ability test. But the difference of average grade between the subjective class and the compared class proved to be some efficient as time goes. (the first test is 0.94 and the second test is 3.33)We can find that the result of the third test (An exponent and log function) turned out be efficient. B. The change of mathematical attitudeHigh group had a great effect in confidence(+1.21), fiexibility(+1.92), will(-0.06), curiosity(+2.64), reaction(+1.50), value(+1.44). Low group appeared to be a little efficient in comparison between the subjective class and compared class. the average of both the subjective class and the compared class in low group decreased if not the result of pre-test but in that of pose-test. Therefore, we can find that the difference between mathematics of maddle school and that of high school gets bigger in Low group.C. The result of a question examinationAfter this research, the reaction that It is helpful to studying accomplishm- ent is 33.7%, the reaction that It is not helpful is 14.7%. After all, this research appears to be a positive reaction. After this study, the change of studying will seems to be much more not in Low group but in High group.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.199-215
• /
• 1996

A new Class-D series-loaded resonant inverter topology which can minimize the influences of the stray inductances is presented. In the conventional Class-D inverters, the stray inductances not only result in the overvoltage which gives the switches voltage stresses, but also in the high frequency resonant currents during turn-off transients. The new Class-D inverter is superior to the conventional Class-D inverters with respect to minimization of the problems caused by the stray inductances and is more suitable for high power and high frequency inverter systems such as induction heating. The validity of the new Class-D inverter is verified by simulation and experimental results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.8
• /
• pp.805-808
• /
• 2011

This paper presents a design of high-efficiency and high-power class E power transmitter. The transmitter is composed of 300 Watt class E power amplifier and AC-DC converter. The AC-DC converter converts 220 V and 60 Hz AC to a 290 V DC. The generated DC voltage is directly applied to a bias of the class E power amplifier. Because the converter does not have DC-DC converter unit, it has very high conversion efficiency of about 98.03 %. To minimize the loss at the output of the power amplifier, high-Q inductor was implemented and deployed to the output resonant circuit. As a result, the 13.56 MHz class E power amplifier has a high power-added efficiency of 84.2 % at the peak output power of 323.6 W. The overall efficiency of class E power transmitter, including the AC-DC converter, is as high as 82.87 %.

• Journal of electromagnetic engineering and science
• /
• v.11 no.3
• /
• pp.161-165
• /
• 2011

In this paper, a high-efficiency DC-AC converter is used for wireless energy transmission. The DC-AC convertter is implemented by combining the oscillator and power amplifier. Given that the conversion efficiency of a DC-AC converter is strongly affected by the efficiency of the power amplifier, a high-efficiency power amplifier is implemented using a class-E amplifier structure. Also, because of the low output power of the oscillator connected to the input stage of the power amplifier, a high-gain two-stage power amplifier using a drive amplifier is used to realize a high-output power DC-AC converter. The high-efficiency DC-AC converter is realized by connecting the oscillator to the input stage of the high-gain high-efficiency two-stage class-E power amplifier. The output power and the conversion efficiency of the DC-AC converter are 40.83 dBm and 87.32 %, respectively, at an operation frequency of 13.56 MHz.