• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.725-731
• /
• 2016

This study numerically investigates the thermal performance of a 2.0-kW butane-based combustion heating system for an electric vehicle under cold conditions. The system is used for cabin space heating and coolant-based battery thermal management. ANSYS CFX 17 software was used for parametric analysis. The mass flow rates of cold air and coolant were varied, and their effects were compared. The numerical results were validated with theoretical studies, which showed an error of 0.15%. As the outside air mass flow rates were increased to 0.005, 0.01, and 0.015 kg/s, the cabin supply air temperature decreased continuously while the coolant outlet temperature increased. When the coolant mass flow rates were increased to 0.005, 0.01 and 0.015 kg/s, the air temperature increased while the coolant outlet temperatures decreased. The optimal mass flow rates are discussed in a consideration of the requirements for high cabin heating capacity and efficient battery thermal management.

• Journal of Radiation Industry
• /
• v.10 no.1
• /
• pp.29-35
• /
• 2016

Radiation generating devices must be properly shielded for their safe application. Although institutes such as US National Bureau of Standards and National Council on Radiation Protection and Measurements (NCRP) have provided guidelines for shielding X-ray tube of various purposes, industry people tend to rely on 'Half Value Layer (HVL) method' which requires relatively simple calculation compared to the case of those guidelines. The method is based on the fact that the intensity, dose, and air kerma of narrow beam incident on shielding wall decreases by about half as the beam penetrates the HVL thickness of the wall. One can adjust shielding wall thickness to satisfy outside wall dose or air kerma requirements with this calculation. However, this may not always be the case because 1) The strict definition of HVL deals with only Intensity, 2) The situation is different when the beam is not 'narrow'; the beam quality inside the wall is distorted and related changes on outside wall dose or air kerma such as buildup effect occurs. Therefore, sometimes more careful research should be done in order to verify the effect of shielding specific radiation generating device. High energy X-ray tubes which is operated at the voltage above 400 kV that are used for 'heavy' nondestructive inspection is an example. People have less experience in running and shielding such device than in the case of widely-used low energy X-ray tubes operated at the voltage below 300 kV. In this study, Air Kerma value per week, outside concrete shielding wall of various thickness surrounding 450 kVp X-ray tube were calculated using MCNP simulation with the aid of Geometry Splitting method which is a famous Variance Reduction technique. The comparison between simulated result, HVL method result, and NCRP Report 147 safety goal $0.02mGy\;wk^{-1}$ on Air Kerma for the place where the public are free to pass showed that concrete wall of thickness 80 cm is needed to achieve the safety goal. Essentially same result was obtained from the application of HVL method except that it suggest the need of additional 5 cm concrete wall thickness. Therefore, employing the result from HVL method calculation as an conservative upper limit of concrete shielding wall thickness was found to be useful; It would be easy, economic, and reasonable way to set shielding wall thickness.

• Parasites, Hosts and Diseases
• /
• v.59 no.5
• /
• pp.507-512
• /
• 2021

Since 1993, vivax malaria has been recognized as a public health burden in Korea. Despite of pan-governmental malaria-control efforts and the dramatic reduction in the burden of this disease over the last 10 years, vivax malaria has not been well controlled and has remained continuously endemic. We focused interviewed and examined the charts of 28 confirmed vivax malaria patients given malarial therapy for whom daily records were kept from Gimpo-si, Gyeonggi-do of Korea. Various epidemiological characteristics of vivax malaria, including the incubation period, medication used, and recurrence, and an evaluation of the parasitic characteristics from the focused interviews of patients from this region are described here. Most of the participants indicated the 3 most common symptoms of malaria (headache, chills and fever). Of the 28 cases, 2 experienced a second attack and there were 17 and 11 cases with short- and long-term incubation periods, respectively, yielding a short-term to long-term ratio of 1.5. Based on the parasitemia stages, most of the participants were tested at 5 to 7 days (11 cases) and 7 to 15 days (11 cases) after initial wave of asexual parasites. In conclusion, public health authorities should consider developing management measures to decrease the time lag for diagnosis and drafting unified and robust guidelines for drug use for malaria and drawing up unified and robust guidelines on the use of medication for malaria. It also suggests that routine monitoring, surveillance, and precise medical surveys in high-risk vivax malaria endemic areas are pivotal to controlling this persistent public disease and finally eliminating it from Korea.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.236-243
• /
• 2021

The aim of this study was to evaluate the anti-oxidant and anti-wrinkle effect of the black carrot(BC) extracted by supercritical dioxide(SC-CO₂). DPPH/ABTS radical scavenging and total polyphenol contents were measured to investigate the anti-oxidant activity of the BC supercritical extract. Collagen production and MMP-1 expression were assessed in normal human dermal fibroblasts(NHDF) for anti-wrinkle activity, The black carrot extract showed the highest total phenolic content(9.037±1.123 mg GAE/g extract) and the best antioxidant properties as shown by DPPH and ABTS assay. The supercritical fluid extracts of black carrot exhibited low toxicity to NHDF cells. In addition, the supercritical fluid extracts showed MMP-1 inhibition and type I pro-collagen synthesis inducing activities in a dose-dependent manner, respectively. Therefore, these results suggest that the black carrot is a potential source of high anti-oxidative, solvent-free and anti-aging material with promising applications in cosmetic, food, and beauty-food industries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.433-440
• /
• 2019

Offshore working environments such as ships, offshore oil and gas plants, and offshore wind turbines are isolated and directly exposed to rough seas, which pose high risks of safety accidents. Therefore, all workers in offshore plants should be able to cope with emergency situations and must be qualified according to relevant laws and regulations such as the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW Convention) and Offshore Petroleum Industry Training Organization (OPITO) standards. In particular, marine workers should be able to perform cardiopulmonary resuscitation (CPR) in isolated locations or enclosed and confined spaces such as those in life-boats, life-rafts, rescue-boats, etc. Because the floor material is made of rubber, it may be difficult to perform chest compressions in life-rafts used to escape from emergency situations in ships or offshore plants. Chest compressions performed on life-rafts may reduce the accuracy of CPR and increase fatigue for those providing aid. To measure the accuracy and fatigue of those performing CPR in life-rafts, 15 experimenters with more than five years of experience as first aid instructors were exposed to different CPR environments in a marine safety training center equipped with an artificial wave generator. The results showed that the accuracy of CPR in the classroom was 99.6 %, but that in various life-raft environments was only 84 %. T-verification of the two sites confirmed the reduced accuracy of CPR performed on life-rafts. CPR on life-rafts should be performed in groups of two and with the use of automated chest compression devices.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.511-521
• /
• 2018

Despite the limitations and difficulty in the application of CALINE3 model for air dispersion prediction of roads and tunnels construction businesses in South Korea, the model is being used in all roads construction projects. This study compared the predicted values of CALINE3 and AERMOD model that is suggested by the US EPA, to the values of GRAL model, a Lagrangian particle tracking model developed in Europe, by applying the models to the existing roads of the urban areas. The result showed low relevance to the actual measurement value in the case of CALINE3 model, thus displaying a low trusted value when applying to the urban areas. In the case of using AERMOD model, the predicted values were overly expressed compared to the actual measurement value, thus leading to the need of adding a No2 conversion method to the model in the future. In the case of GRAL model, a Lagrangian particle tracking model, the relevance between the actual and predicted values were high as the model considers the surrounding topography and the buildings all together, thus confirming that the model can be used for air dispersion prediction of the roads in the urban areas. Lastly, the result of this study testing the air prediction models in Jeongneung Measuring Station points that it is necessary for the future studies to expand the testing areas and test the validity of the models continuously.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1369-1382
• /
• 2018

As the number of multispectral satellites increases, it is expected that it will be possible to acquire and use images for periodically. However, there is a problem of data discrepancy due to different overpass time, period and spatial resolution. In particular, the difference in band bandwidths became different reflectance even for images taken at the same time and affect uncertainty in the analysis of vegetation activity such as vegetation index. The purpose of this study is to estimate the band adjustment factor according to the difference of bandwidth with other multispectral satellites for the application of KOMPSAT-3 satellite in agriculture field. The Spectral band adjustment factor (SBAF) were calculated using the hyperspectral satellite images acquired in the desert area. As a result of applying SBAF to the main crop area, the vegetation index showed a high agreement rate of relative percentage difference within 3% except for the Hapcheon area where the zenith angle was 25. For the estimation of SBAF, this study used only one set of images, which did not consider season and solar zenith angle of SBAF variation. Therefore, long-term analysis is necessary to solve SBAF uncertainty in the future.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.359-385
• /
• 2005

Red ocher, red lead or cinnabar has been as red colorant for ages. Cinnabar of the red pigments has been highly regarded as a valuable ingredient because it represent a symbol of exorcising and a haute image. It was used as a pigment of painting and mural painting, bowl, clothes, rock writing, gravestone, etc. It is powder which dissolves in perilla oil or glue before using. Because it is high-priced, the use of cinnabar may be limited to the privileged class. Therefore, red ocher or red lead was used instead of cinnabar. "Gongsagyunmunrok" demonstrated that government official's gravestonea has been painted red by two colorants in the period of the Goryeo dynasty. However, cinnabar may be used to paint gravestones for the first time in the period of the Three States because it has been transmitted since the times. This study discuss the results obtained from an analysis of the pigments used on the red pigments of the Stone Monuments. The results can be briefly summarized as below; First, the microcrystalline structures seen on the surface section of analyzed pigments, samples of which were taken from various parts of red pigments show that different sizes and shapes of pigment particle. Second, a result of the analysis on the composition and structure of the pigments shows that the main components in their composition are : Red pigments - Red lead($Pb_3O_4$), Cinnabar(HgS) and Hematite($Fe_2O_3$) White pigments - Calcite($CaCO_3$) Especially, we knew that red Stone Monuments were found to be natural mineral pigments, which were used as a singular or a mixture.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.75-80
• /
• 2018

The smart city is developing an energy system efficiently through a common management of the city resource for the growth and a low carbon social. However, the smart city doesn't counter a verification effectively about a anomaly pattern detection when existing security technology (authentication, integrity, confidentiality) is used by fixed security key and key deodorization according to generated big data. This paper is proposed the "security nonce generation based on security nonce generation" for anomaly pattern detection of the adversary and a safety of the key is high through the key generation of the KDC (Key Distribution Center; KDC) for improvement. The proposed scheme distributes the generated security nonce and authentication keys to each facilities system by the KDC. This proposed scheme can be enhanced to the security by doing the external pattern detection and changed new security key through distributed security nonce with keys. Therefore, this paper can do improving the security and a responsibility of the smart city platform management data through the anomaly pattern detection and the safety of the keys.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.105-118
• /
• 2019

New manufactural innovation was generated with combination with Do It Yourself(DIY) culture and Information and Communication Technology(ICT). It led people to make their creative idea in real things and share them. This social movement has been called as 'Maker' culture. As maker culture was developed, the places named 'Makerspace' with high-tech equipment and sharing environment have been widely spread and gotten spotlight. Futhermore, makerspaces have been diffused rapidly in Korea; because of its importance for the fourth industrial revolution. However, the operation of makerspaces is not matured as much as its popularity, so problems occurred in operating aspects. The number of related studies is not enough to foster domestic maker culture in Korea. Of that, studies on operation of makerspaces were limited and the quantity of survey sample was insufficient. Therefore, firstly, in this study, operation elements of makerspaces were extracted by literature review. And, survey for examining the extracted elements was conducted to four policy makers and researchers, four makerspace operators and four makers. Final survey was carried out by Importance-Performance Analysis(IPA) method to fifty recipients composed of policy makers and researchers, operators, and makers. In result, importance located above performance in every elements and in-depth interview was followed to understand domestic surroundings and suggest way to invigorate makerspaces in Korea. The suggestion shows as follows. First, online and offline platform for makers should be expanded; second, makerspace should connect private sponsorship with makers or their projects; third, policy direction has to be improved from venturing business to diffusion of maker culture; fourth, basic maker education should be enlarged.