• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.7-18
• /
• 2010

This study analyzed the relative vehicle speed and vehicle deceleration time caused by traffic conflicts using vehicle speed data at expressway toll gates and traffic conflict occurrence data. According to the analysis, the greater the relative vehicle speed is at the toll gate, the more sudden vehicle deceleration occurs due to traffic conflicts. In particular, a comparison study of cases in similar operating conditions presents a finding that usage of lanes influences traffic conflict occurrences as well as relative vehicle speed. With this finding, the study further conducted a quantitative analysis of the accident rates in relation to the relative vehicle speed between vehicles using a "Hi-Pass" lane and a regular lane at the toll gate. It indicates that when the relative vehicle speed is greater, the accident rate is higher due to sudden vehicle deceleration and shorter deceleration time. Furthermore, when the expressway entrance/exit point is closely located to a toll gate and the relative vehicle speed is great, a analysis at a traffic conflict shows a low value.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.95-95
• /
• 2013

박막 공정 기술은 반도체 및 디스플레이뿐만 아니라 대부분의 전자소자에 적용되는 매우 중요한 기술이다. 그 중, 마그네트론 스퍼터링 공정은 플라즈마를 이용하여 금속 및 세라믹 등의 벌크 물질을 박막으로 증착 가능한 가장 널리 사용되는 방법 중의 하나이다. 하지만, Fe, Co, Ni 같은 강자성체 재료는 공정이 불가능하며, 스퍼터링 타겟 효율이 40% 이하이고, 제한적인 방전압력 범위 및 전류 상승에 의한 높은 전압 인가 제한이 있다는 단점이 있다. 본 연구에서 사용된 고밀도 플라즈마 소스를 적용한 고효율 스퍼터링 시스템은 할로우 음극을 이용한 원거리에서 고밀도 플라즈마를 생성하여 전자석 코일을 통해 자석이 없는 음극으로 이온을 수송시켜 스퍼터링을 일으킨다. 따라서 강자성체 재료의 스퍼터링이 가능하며, 90% 이상의 타겟 사용 효율 구현 및 기존 마그네트론 스퍼터링 대비 고속 증착이 가능하다. 또한, $10^{-4}$ Torr 압력영역에서 방전 및 스퍼터링이 가능하다. 타겟 이온 전류를 타겟 인가 전압과 관계없이 0~4 A까지, 타겟 이온 전류와 상관없이 타겟 인가 전압을 70~1,000 V 이상까지 독립적으로 제어가능하다. 또한 TiN과 같은 질소 반응성 공정에서 반응성 가스인 질소를 40%까지 넣어도 타겟에 수송되는 이온의 양에 영향이 없다. 할로우 음극 방전 전류 40 A에서 발생된 플라즈마의 이온에너지 분포는 55 eV에서 가우시안 분포를 보였으며, 플라즈마 포텐셜인 sheath drop은 74 V 였다. OES를 통한 광학적 진단 결과, 전자석에 의한 이온빔 초점에 따라 플라즈마 이온화율을 1.8배까지 증가시킬 수 있으며, 할로우 음극 방전 전류가 60~100 A로 증가하면서 플라즈마 이온화율을 6배까지 증가 가능하다. 또한, 타겟 이온 전류와 관계없이 타겟 인가 전압을 300~800 V로 증가시킴에 따라 Ar 이온 밀도의 경우 1.4배 증가, Ti 이온 밀도의 경우 2.2배 증가시킬 수 있었으며, TiN의 경우 증착 속도도 16~44 nm/min으로 제어가 가능하다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.305-311
• /
• 2012

With the rapid deployment of hipass$^{(R)}$, the congestion is inevitable due to the operation of the hipass lane system. Recently, SMART Highway project have developed a multi-lane mainline tolling system, called SMART Tolling system. To analyze the effectiveness of the system in terms of capacity, this study tries to estimate the capacity and its improvement of multi-lane tolling system based on current hipass$^{(R)}$ data. The methodology uses the saturation time headway. This follows three steps; 1) estimate the saturation time headway, using hipass$^{(R)}$ data, and capacity. 2) estimate two factors (the first one is dividing the one side lane width and lateral clearance factor ($f_w$) into two side one, the second one is dividing the capacity of hipass lane operating a circuit breaker into the capacity of hipass lane not operating, the last one is increasing factor of lane width). 3) calculate the capacity of multi-lane mainline tolling system. The results of method produced 2172~2187 veh/hour as smart tolling capacities, respectively. Those are higher about 370 veh/hour than the values from existing literature reviews. Additionally, saturation time headways were identified as lower by 0.5 seconds/veh than existing headways based on hi-pass$^{(R)}$ based one, which naturally implies the improvement in capacity. Some limitations and future research agenda have also been discussed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.79-84
• /
• 2011

In this paper, we analyzed performance of vehicle detection for ITS (Intelligent Transport System) applications. We simulated the vehicle detection at Hi-Pass System is based on DSRC (Dedicated Short Range Communication). DSRC is a wireless network using ITS, including GPS (Global Positioning System) satellites in conjunction with the national transportation system. The system performance is evaluated in terms of bit error probability. In the simulation, the vehicle speed is set at 60 km/h and carrier frequency is 5.8 GHz. Wireless channel is modeled as the Rician fading channel. In the transmitter, the ASK (amplitude shift keying) modulation scheme is applied. From simulation results, we confirmed that performance of applied Alamouti scheme is better than other systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.6
• /
• pp.25-33
• /
• 2014

This study investigates the reliability of DSRC-based traffic information system on the typical urban arterial with the minimum sample size method. VISSIM has been employed to calculate the required sample size. After comparing the number of hi-pass vehicles recorded from DSRC and the required sample size, this study found that the interrupted traffic state tends to generate more outliers than the uninterrupted one, the lack of the number of vehicles completely passing links with multiple driveways makes it difficult to estimate the reliable traffic information, the traffic information during peak hour is relatively more reliable than that during off-peak hour, and the reliability of DSRC-based traffic information system depends on the significance level in calculating the sample size. The driveway density and traffic signal operation due to the individual link length significantly affects the required sample size, resulting in determining the reliability of the DSRC-based traffic information system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.1-20
• /
• 2022

The basic way to charge vehicles for using road and public transport networks is the entry-exit toll system. This system works by reading Hi-Pass and public transportation cards of the vehicles using card readers. However, the problems of navigating a route in consideration of entry-exit toll systems include the non-additive costs of enumerating routes. This problem is known as an NP-complete task that enumerates all paths and derives the optimal path. So far, the solution to the entry-exit toll system charging has been proposed in the form of transforming the road network. However, unlike in the public transport network where the cards are generalized, this solution has not been found in situations where network expansion is required with a transfer, multi-modes and multiple card readers. Hence, this study introduced the Link Label for a public transportation network composed of card readers in which network expansion is bypassed in selecting the optimal path by enumerating the paths through a one-to-one k-path search. Since the method proposed in this study constructs a relatively small set of paths, finding the optimal path is not burdensome in terms of computing power. In addition, the ease of comparison of sensitivity between paths indicates the possibility of using this method as a generalized means of deriving an optimal path.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.83-94
• /
• 2017

There is a two lane ECTS(Electronic Toll Collection System) that users can pass with 80kph high speed in SeoBusan Tall Gate. This system to be combined two hi-pass lanes for removing meddle-island have been operated successfully. But, the appearance of two Lane ETCS makes toll gate more complicated, so it is very important how to arrange effectively various tolling lanes. This study was trying to evaluate lane configuration for minimizing speed and speed deviation among all kinds of lanes including two Lane ETCS in seoul toll gate. That is, we selected all scenarios to be happened actually, and evaluated them using micro traffic simulation model (VISSIM). The results of this study showed that each alternative had a very different speed and speed deviation by lane each other, so we will be able to achieve effective operation and configuration of lanes in toll gate using scenario methodology.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.41-53
• /
• 2004

This study introduces the process of the field test of ETCS that has been performed by six enterprises for selecting the type of ETCS that will be applied to the internal tall roads. The main communication modes of six enterprises are active RF(radio wave)type and IR(optical wave)type. In this study, communication modes and systems, which are being used by each enterprises, have been compared and analyzed. Besides this, the configuration and the basic performances of the system have been checked. After those, the contents of the field performance test classified by the items of the test and the results of the test, finally, have been analyzed. Through analyzing the test, it is found that an enterprise using IR type and two enterprises using RF type satisfied the standards of the test and the others failed to meet the standards. However, the enterprises seem to be becoming stable by a large number of tests and the effort for improving from general point of view. Although the methods of performance evaluation in this field test considered enough patterns that are used in the present highway or Hi-Pass, there might possibly be some problems in the results because Korea Highway Corporation had decided the method and the number of times of the test according to their own standards about the various situations that can happen. Therefore, it will be needed to develop the method of standards for testing the performance which can be correspond with driver's behavior that can actually happen on the highway or the methods of transportation management.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.13-22
• /
• 2009

Recently, DSRC technology is used in the various fields such as parking system, BIS, ETC, etc. This paper suggests a traffic information system using this DSRC technology. The traffic information processing based on point detection using existing vehicle detection equipment is the system in which a collection and a service are operated separately while the traffic information system based on the link detection using DSRC is able to collect and provide the traffic information through the communication between RSE and OBU. The speed of a traffic congestion is high on the process converted from a point passing speed to a link average speed because the vehicle detection equipment makes the link traffic information into the point information. When the condition of traffic is deteriorated, traffic speed of the vehicle detection equipment becomes higher than DSRC. Especially, in this system, deflection by data of the traffic speed of the traffic information system is much decreased, and the unexpected condition detection and traffic condition are provided promptly.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.97-104
• /
• 2015

PURPOSES : Expressways experience chronic and recurring congestion, especially during weekends and holidays, because of the increased demands for leisure-related travel. The alternatives to solve chronic and recurring congestion may be three-fold: (1) physical expansion of expressway capacities, (2) road pricing, and (3) temporal and spatial distribution of traffic demands. Among these, the third alternative may be the most cost-effective method for the Korea Expressway Corporation (KEC) that can be achieved by using the existing ITS infrastructure. METHODS : KEC initiated a pilot study in which the traffic on congested expressways was managed by providing traffic condition information (i.e., travel times) of neighboring national highways for taking detours via variable message signs (VMS). This study aimed to estimate the detour rate, and the two pilot studies on Seohaean and Yeongdong expressways yielded many benefits. RESULTS : It was revealed that the total length of congestion segments decreased by 7.8 km, and the average travel speed increased by 5.3 km/h. CONCLUSIONS : Based on these findings, it was concluded that the propagation of detour information via VMSs during congestion hours can help reduce congestion on expressways and increase the benefits of the entire network.