• Structural Engineering and Mechanics
• /
• 제1권1호
• /
• pp.61-74
• /
• 1993

A new three-dimensional transition solid element was presented for the automated three-dimensional adaptive h-refinement or the local mesh refinement where the steep stress gradient exists. The proposed transition element was established by adding variable nodes(element nodes) to basic 8-node for an effective connection between the refined region and the coarse region with minimum degrees of freedom possible. To be consistent in accuracy with 8-node solid element with nonconforming modes, this transition element was also improved through the addition of the modified nonconforming modes. Numerical examples show that the performance of the element and the applicability to 3D adaptations are satisfactory.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.733-735
• /
• 2001

The high temperature superconducting bulk can be used as the bearing of a motor. This paper presents the fabrication and test results of a motor with superconducting bearing using HTS bulks. The bearing used four hexahedron type YBCO bulks. Height, width and depth of the HTS bulk were 10mm, 30mm and 30mm, respectively. Single phase induction motor was used to drive the shaft and solid rotor was adopted for high speed rotation. Test results show the motor with HTS magnetic bearing can rotate silently and smoothly without any contact.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.752-757
• /
• 2001

The characteristics of heat energy distribution on the fire-proof clay with microwave heating drying are numerically investigated using finite element method. The modelled regular hexahedron chamber$(50cm\times50cm\times50cm)$ filled with air consists of vertical heat source and sink walls, a fire-proof clay model, and adiabatic plates on the top and bottom walls. With different geometrical aspect ratios of the fire-proof clay model, the heat energy distribution is throughly investigated. The model gave a good prediction of the microwave heating characteristics of fire-proof clay. The optimal shape of the fire-proof clay for given chamber geometry and microwave power is analyzed.

• Journal of the Korean Data and Information Science Society
• /
• 제15권4호
• /
• pp.717-729
• /
• 2004

The contour method which was originally designed for $2{\times}2{\times}2$ contingency table is studied for $2{\times}2{\times}K$ and $2{\times}3{\times}K$ tables. Whereas a contour plot for a $2{\times}2{\times}K$ table is represented on unit squared two dimensional plane, a contour plot of a $2{\times}3{\times}K$ table can be expressed with a regular hexahedron on three dimensional space. Based on contour plots for categorical data fitted to all possible three dimensional log-linear models, one might identify whether $2{\times}2{\times}k$ or $2{\times}3{\times}K$ tables are collapsible over the third variable.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.577-584
• /
• 2001

For construction and design of tunnels, groundwater flow models are used to find the influence of groundwater to the stability of tunnels considering the geological condition around the tunnels and the materials used in tunnel linings. For the analysis of tunnel flow, some commercial programs, e.g. MODFLOW, SEEP/W etc., are used. These programs have limitations that MODFLOW could not define curved surface smoothly in three dimensional flow media and SEEP/W is the 2-dimensional flow model. In this paper, the ability of a finite element program developed for analyzing 3-dimensional groundwater flow is examined. Confined steady state groundwater flow solution in non-homogeneous media is obtained using isoparametric element with eight trilinear hexahedron nodes and is compared with the result of MODFLOW. It was found that the solution yielded a good result with the three dimensional flow studied.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1746-1754
• /
• 1998

A computer program has been developed to predict the heat transfer characteristics and the temperature distribution in the cylinder block of a 4-cylinder, 4-stroke engine. The finete element method is employed to handle the complex geometries associated with the practical cylinder block. The hexahedron finite element is used for a mesh generation of three-dimensional domain. The present numerical procedure has been validated with the measured temperature at several locations of cylinder block. The heat transfer characteristics of engine cylinder block is systematically analyzed for various engine speeds and loading conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.423-424
• /
• 2006

This paper proposes a hexahedral mesh generation scheme based on mapping approach and improves the drawback of sweeping algorithm. In order to improve the drawback, the algorithm in this paper generates hexahedral meshes by three dimensional element mapping first. Then hexahedral meshes are equivalent to geometry of the volume by mapping and smoothing. Sample meshes are constructed to demonstrate the mesh generating capability of the proposed algorithm.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3159-3174
• /
• 1994

A simple octree encoding algorithm based on a tetrahedron root has been developed to be used for fully automatic generation of three dimensional finite element meshes. This algorithm starts octree decomposition from a tetrahedron root node instead of a hexahedron root node so that the terminal mode has the same topology as the final tetrahedral mesh. As a result, the terminal octant can be used as a tetrahedral finite element without transforming its topology. In this part(I) of the thesis, an efficient algorithm for the tetrahedron-based octree is proposed. For this development, the following problems have been solved, : (1) an efficient data structure for storing the octree and finite elements, (2) an encoding scheme of a tetrahedral octree, (3) a neighbor finding technique for the tetrahedron-based octree.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.277-279
• /
• 2000

This paper proposes two kinds of the eddy current brake which uses permanent magnet. The one, like multipolar excitation consists of hexahedron shape of a segmented permanent magnetic and iron situated in the air-gap. The other, like multipolar excitation consists of only a segmented permanent magnetic. We use a finite element method to compute the flux distribution in the model. Also, we use the Galerkin-FEM with linear interpolation function may oscillate between the adjacent nodes to calculate the braking and attraction force. The advantages of the Halbach array are discussed.

• 한국자동차공학회논문집
• /
• 제1권2호
• /
• pp.134-143
• /
• 1993

The trajectory planning for the manipulator installed on "the automatic pothole repair vehicle" is discussed and the final surface of the patched pot hole is simulated in this work. The relationship between the accumulation data of the mixture with and without the movement of the manipulator is identified to utilize the latter data for the calculation of the former one. Based on this relationship, the method to calculate the accumulation of the mixture when the manipulator changes the speed and the direction is also introduced. The trajectory is determined to make the final surface smooth under the condition that the pothole is cut to hexahedron before patching and only the spacing and the shifting of the manipulator is controllable. Final surface is simulated by the computer to prove the adequacy of the determined trajectory.